Influence of surface activation by plasma and nanoparticle adsorption on the morphology, thermal stability and combustion behavior of PET fabrics

Plasma surface activation at different process parameters (namely, power and etching time) has been combined with nanoparticle adsorption (i.e., a natural montmorillonite) in order to improve the thermal stability and flame retardancy of PET fabrics. Scanning electron microscopy coupled to elemental analysis has put in evidence a direct relationship between the distribution of nanoparticles on fibers and process parameters. The presence of the above nanoparticles affects the thermal stability of fabrics in air, as assessed by thermogravimetric analysis: a delay of the mass loss process has been observed for the treated samples.Combustion behavior has been investigated by cone calorimetry: plasma activated fabrics have shown a remarkable improvement in terms of time to ignition (up to 104%) and a slight reduction of the heat release rate (ca. 10%) as compared to neat PET.     

Improved microwave absorption and electrostatic charge dissipation efficiencies of conducting polymer grafted fabrics prepared via in situ polymerization

Polyaniline (PANI) and polypyrrole (PPY) were grafted over cotton fabrics by in situ polymerization. FTIR spectra show systematic shifting of bands corroborating surface grafting of conducting polymers on cotton fabric. SEM images revealed that the surface coating of PANI was smoother than PPY. However, better control over coating thickness and uniformity was achieved in PPY fabric. The probable formation mechanism of grated fabrics has also been proposed. The good thermal stability and acceptable electronic conductivity values indicate that these fabrics could be used for electrostatic charge dissipation and microwave absorption. The antistatic studies have shown complete charge dissipation (decay time <0.01 sec). The microwave absorption studies of the conducting fabrics in X‐band (8.2–12.4 GHz) show absorption dominated total shielding effectiveness in the range ?11.3 to ?11.7 dB (>92% attenuation) and ?9.2 to ?9.6 dB (>88% attenuation) for fabrics grafted with PPY and PANI, respectively. Copyright © 2011 John Wiley & Sons, Ltd.     

Fabrication of superhydrophobic cotton fabrics by silica hydrosol and hydrophobization

Superhydrophobic cotton fabrics were prepared by the incorporation of silica nanoparticles and subsequent hydrophobization with hexadecyltrimethoxysilane (HDTMS). The silica nanoparticles were synthesized via sol-gel reaction with methyl trimethoxy silane (MTMS) as the precursor in the presence of the base catalyst and surfactant in aqueous solution. As for the resulting products, characterization by particle size analyzer, scanning electron microscopy (SEM), scanning probe microscopy (SPM), X-ray photoelectron spectroscopy (XPS), and thermal gravimetric analysis (TGA) were performed respectively. The size of SiO₂ nanoparticles can be controlled by adjusting the catalyst and surfactant concentrations. The wettability of cotton textiles was evaluated by the water contact angle (WCA) and water shedding angle (WSA) measurements. The results showed that the treated cotton sample displayed remarkable water repellency with a WCA of 151.9° for a 5 μL water droplet and a WSA of 13° for a 15 μL water droplet.     

Correlations between the electric charging properties and the optically determined structure of non-woven fabrics

The aim of this paper is to determine the degree of correlation between the electrostatic potential distribution on the surface of non-woven fabrics and the material structure as obtained by optical means. The potential distribution on the material surface was monitored for several samples of two types of fabrics that were electrically charged using corona discharge. The results show that the charge distribution on the samples surface significantly correlates with the spreading and the third centered moment of the gray-scale pictures of the samples.     

铝镧共掺杂的氧化锌红外隐身涂料在帐篷织物上的应用

以水性聚氨酯为粘合剂,掺杂Al和La的ZnO为填料,配以其它助剂制成了红外隐身涂料,应用在帐篷织物表面,探究涂层厚度以及填料含量对红外发射率的影响,并研究了导热系数和红外隐身性能之间的关系。 研究发现,涂层厚度和填料含量对涂层织物的红外发射率有着显著的影响。 当填料质量分数为70%时,得到的帐篷涂层织物的红外发射率可降至0.622,调节填料含量和涂层厚度,可以的得到红外发射率在0.622~0.932之间的帐篷涂层织物。 此外,发现导热系数对红外隐身性能也有一定的影响,红外隐身性能随着导热系数的增加而提高。 通过调节填料含量和涂层厚度制作不同红外发射率的涂层帐篷织物,放在不同背景下拍摄红外热成像图,发现涂层在不同的环境中均具有良好的伪装能力。     

织物表面摩擦特性测试装置及试验研究

为了评价织物表面的摩擦特性,表征织物和皮肤接触过程中摩擦力的动态变化信息,研制了一种能测试织物表面动态摩擦特性的机械测试装置,该装置集成了机械装置、传感器及控制系统,能一次性测试织物的静、动摩擦系数.基于测试过程中采集的原始数据,定义了摩擦功、静摩擦系数及动摩擦系数3个指标来评价织物表面的摩擦特性.试验采用12种典型的织物样本,对织物的表面摩擦特性进行了客观测试及主观评价,并在日本Kawabata KES-FB4系统上进行了对比试验.结果表明:针对12种典型的织物样本,3个评价指标均存在着显著的差异,牛仔布具有最大的静摩擦系数,经编网眼针织布具有最小的静摩擦系数,与常理相符.客观测试得到的动态指标摩擦功和主观评价的结果具有一致性.本测试装置得到的动态摩擦系数和KES-FB4测试得到的平均摩擦系数也具有一致性.该测试装置可以为相关领域的研究提供一种新的测试手段.     

Novel UV-protective formulations for cotton, PET fabrics and their blend utilizing irradiation technique

A novel coating formulation to impart ultraviolet (UV) protection property to cotton, Polyethylene trephethalate (PET) and cotton/PET fabrics was prepared and gamma rays as an ionizing radiation was utilized for surface curing. Natural occurring aluminum potassium sulfate (Alum) was used individually and in binary coat with Zinc Oxide (ZnO), to induce the UV-blocking properties. It was found that using Alum (0.3 g/ml) caused a prompt increase in ultraviolet protection factor (UPF) over the uncoated fabrics. Moreover, the incorporated ZnO in the binary coat increased the UPF for two to threefold than the stand-alone Alum coating, specially in case of PET coated fabric. Water absorbance and moisture regain of ZnO and Alum/ZnO coated fabrics showed a decrease over the blank samples, due to the usage of oligomer/monomer combination. On contrary, Alum showed a hydrophilic effect with the increase in its content in the formulation. Surface Electron Microscope showed the homogenous coating of fibers. X-ray diffraction (XRD), energy dispersive X-ray (EDX) and water vapor permeability were also tested for coated samples.     

Preparation of nonwoven polyimide/silica hybrid nanofiberous fabrics by combining electrospinning and controlled in situ sol-gel techniques

A controlled in situ sol-gel synthesis combined with the electrospinning technique and postspun imidization was applied in the fabrication of polyimide/silica hybrid nonwoven nanofiberous fabrics with excellent thermal and mechanical performance. The nanofiberous fabrics were prepared by electrospinning of the solution of tetraethoxysilane (TEOS) and polyamic acid (PAA). The different silica contents in the fabrics were achieved by varying the amount of TEOS while fitting the solid content of PAA. The final polyimide/silica fabrics was obtained after imidization of PAA and gelation of silica phase simultaneously accomplished through a step-wise heating process. Some specific IR techniques and other characterizations indicated the successful incorporation of the silicon dioxide (SiO₂) into the PI matrix and the relatively even distribution of the SiO₂ in the fabrics. An increase of 133 °C in the decomposition temperature and 4-fold enhancement of the ultimate tensile strength were achieved for the hybrids with a 6.58 wt.% of SiO₂ content, compared to the pure PI fabric. The excellent performance could be attributed to the good compatibility between the polyimide and silica, and good adhesion among the fibers, which resulted from the controlled TEOS hydrolysis and the simultaneous imidization and gelation process.     

Cardanol Based Matrix for Jute Reinforced Pipes

The aim of this work is the development of composite pipes using renewable resources. The pipes, manufactured by filament winding technology, were obtained using an epoxy resin crosslinked with a cardanol based novolac as matrix and jute fibres as reinforcement. Cardanol is a natural oil extracted from the shell of the cashew (Anacardium occidentale L.) nut. An amount of natural materials higher than 50% by weight was achieved in the final composites. Tensile and parallel plate compression tests were carried out on the composite pipes.     

Superhydrophobic cotton fabric coating based on a complex layer of silica nanoparticles and perfluorooctylated quaternary ammonium silane coupling agent

A superhydrophobic complex coating for cotton fabrics based on silica nanoparticles and perfluorooctylated quaternary ammonium silane coupling agent (PFSC) was reported in this article. The complex thin film was prepared through a sol-gel process using cotton fabrics as a substrate. Silica nanoparticles in the coating made the textile surface much rougher, and perfluorooctylated quaternary ammonium silane coupling agent on the top layer of the surface lowered the surface free energy. Textiles coated with this coating showed excellent water repellent property, and water contact angle (CA) increased from 133° on cotton fabrics treated with pure PFSC without silica sol pretreatment up to 145°. The oil repellency was also improved and the contact angle of CH₂I₂ droplet on the fabric surface reached to 131°. In contrast, the contact angle of CH₂I₂ on the fabric surface treated with pure PFSC was only 125°.