水冷却对高温花岗岩的细观损伤及动力学性能影响

为探讨高温花岗岩经水冷却后的细观结构损伤及动态力学性能,对水冷却后高温花岗岩开展波速和核磁共振测试,分离式霍普金森压杆冲击试验,以及冲击破碎试样的扫描电镜观察,分析比较不同状态下花岗岩波速、孔隙度和动力学参数的变化规律。研究发现:随着温度升高,经水冷却处理后高温花岗岩波速非线性下降,大孔径孔隙度分量增大,且水冷却后试样的孔隙孔径尺寸和数量均大于自然冷却;水冷却后高温花岗岩动力学参数呈现出随着温度升高,峰值应力减小,峰值应变增大,弹性模量则先增大后减小的规律;由于水冷却使高温花岗岩表面温度急剧降低,产生额外的温度应力,花岗岩内部损伤加剧,表现出更低的波速与峰值应力;而水的冷淬作用一定程度上提高了表层花岗岩的硬度,降低了高温后花岗岩的塑性能力,与自然冷却相比水冷却后花岗岩的峰值应变减小,弹性模量增大,表现出脆性破坏特征。在温度低于400℃时,冷却方式对冲击裂纹影响不大,随着温度升高到800℃,自然冷却后花岗岩冲击断面呈蜂窝状,而水冷却后冲击断面则相对平整。     

Hydrogen Bonding in the Dimer and Monohydrate of 2-Adamantanol: A Test Case for Dispersion-Corrected Density Functional Methods

Weakly-bound intermolecular clusters constitute reductionist physical models for non-covalent interactions. Here we report the observation of the monomer, the dimer and the monohydrate of 2-adamantanol, a secondary alcohol with a bulky ten-carbon aliphatic skeleton. The molecular species were generated in a supersonic jet expansion and characterized using broadband chirped-pulse microwave spectroscopy in the 2–8 GHz frequency region. Two different gauche-gauche O-H···O hydrogen-bonded isomers were observed for the dimer of 2-adamantanol, while a single isomer was observed for the monomer and the monohydrate. The experimental rotational parameters were compared with molecular orbital calculations using density functional theory (B3LYP-D3(BJ), B2PLYP-D3(BJ), CAM-B3LYP-D3(BJ), ωB97XD), additionally providing energetic and electron density characterization. The shallow potential energy surface makes the dimer an interesting case study to benchmark dispersion-corrected computational methods and conformational search procedures.     

气固射流床射流深度的研究

在３００×５１×２６００ｍｍ的二维射流床中，采用多路毕托管测试系统，对包括三种双组份混合物在内的五种物料的射流深度进行了考察。结果表明，射流管径、射流气速对射流深度都有影响，本文尤其考察了环隙气量与射流深度的关系，发现在同样的射流气速下，环隙气速增大则射流深度降低，得出了综合各种影响因素的关联式。     

Detection of water in jet fuel using layer-by-layer thin film coated long period grating sensor

The quantitative measurement of jet fuel additives in the field is of interest to the Air Force. The “smart nozzle” project was designed as a state-of-the-art diagnostics package attached to a single-point refueling nozzle for assessing key fuel properties as the fuel is dispensed. The objective of the work was to show proof of concept that a layer-by-layer thin film and long period grating fibers could be used to detect the presence of water in jet fuel. The data for the nafion/PDMA film and a long period grating fiber is a combination capable of quantitative measurement of water in kerosene. The average response (spectral loss wavelength shift) to the kerosene sample ranged from −6.0 for 15 ppm to −126.5 for 60 ppm water. The average calculated value for the check standard was 21.71 and ranged from 21.25 to 22.00 with a true value of 22.5 ppm water. Potential interferences were observed and are judged to be insignificant in real samples.     

气相色谱-质谱联用法测定日用品及食品中9种凉味剂的含量

建立了日用品及食品中薄荷脑等9种新型凉味剂含量的测定方法.样品经乙醇超声提取后,用DB-1701 MS毛细管色谱柱(30 m×0.25 mm×0.25 μm)分离,选择离子监测模式(SIM)进行质谱检测.在优化分析条件下,9种凉味剂分离良好,其在0.25～250 μg/mL浓度范围内线性关系良好,相关系数均大于0.996,除薄荷氧基.1,2丙二醇(0.26 μg/g)外,其余凉味剂的检出限均小于0.1μg/g;在3个不同加标浓度下的平均回收率为82.8％～103.5％,相对标准偏差(RSD,n=6)均不高于3.7％.该方法灵敏、准确、可靠,能较好地分离薄荷脑等9种凉味剂,具有分析时间短、抗干扰性好、定量准确等优点,可为含薄荷(清凉)口味食品的质量控制及未知凉味剂含量样品的分析提供科学数据.     

燃料爆炸抛撒过程中射流量的估算

通过高速录像记录3种质量不同、长径比为1.5~2.3的燃料空气炸药（FAE）装置爆炸抛撒过程的实时结果,用专门的软件对图像进行了处理。以装置上端盖为基准对解体时间进行了初步估算,由此给出了燃料初期射流量的理论估算式,结合试验结果计算了燃料的射流量。结果表明,燃料的射流量与装置的高度、装置的材质和燃料的密度等因素有关,实验研究的3种装置射流量均大于总燃料量的10%。     

气膜孔角度对动叶前缘冲击/气膜复合冷却的影响

本文针对GE-E3第一级动叶前缘的冲击/气膜复合冷却结构进行了热流耦合数值研究.采用标准k-ω湍流模型,分析了前缘气膜孔对称布置时,其角度对透平动叶前缘冲击/气膜复合冷却特性的影响;在五种冷气质量流量比(MFR=0005,0.010, 0.016, 0.020, 0.025)下,研究了气膜孔在不同角度(β=20°,25...     

单级G-M 150制冷机性能实验研究

为满足高温超导和低温气体处理系统等工程应用项目的大冷量需求,单级大冷量G-M制冷机成为目前国内外的研究热点。文章中描述了以G-M150为基础的制冷机综合性能测试方法及实验平台,并对其制冷温度和制冷量两个主要性能的影响因素进行实验研究,为探讨20K单级大冷量G-M制冷机的研究提供参考。     

液滴撞击壁面铺展及换热过程数值模拟

基于喷雾冷却时液滴撞击壁面现象,本文采用CLSVOF(coupled level set and volume of fluid)方法对不同工况下单液滴撞壁过程进行数值模拟,获得了单液滴撞击热壁面动态特性;分析了初始速度、液滴直径等初始参数对液滴撞壁后的动态铺展规律以及壁面换热特性的影响规律,获得了上述参数变化时液滴铺...     

离散孔纵向波纹隔热屏气膜冷却特性研究

本文对离散气膜孔型纵向波纹隔热屏的冷却特性进行数值计算.研究中主要参数有冷却通道无量纲高度h,波纹板无量纲高度b及气膜孔无量纲直径d.波纹板高度的变化对冷却效果的影响最为明显.波纹板高度越小,隔热屏壁面冷却效果越好.降低冷却通道高度可以提高隔热屏前面部分的冷却效果.开孔率一定,气膜孔直径较小,隔热屏冷却效果较好.