Performance of textile and building materials for a particular evaporative cooling purpose

High energy demand associated to the massive use of air conditioning systems requires careful consideration of passive cooling strategies, with evaporative cooling being recognized as a useful possibility for that purpose. One important factor that influences the performance of evaporative cooling systems is the media material that supports water evaporation process. In this work evaporative cooling capabilities of different building and textile materials were experimentally determined. The major purpose of the study was to select an evaporative cooling material to be used in a more complex passive cooling unit under research development. A test tunnel was constructed for this particular work and the behavior of several samples was analyzed. Results show that among the studied materials a polyester spacer fabric with honeycomb structure presents best performance.     

HIRFL新B1聚束器冷却系统设计

在利用 MAFIA程序计算得到的新 B1聚束器腔体表面电流分布的基础上 ,提出了新 B1聚束器的冷却方案 ,并计算了水流及水管表面的电流分布 ,得到了冷却所需要的流量。最后估计了由于工作温度的升高所引起的并联阻抗的减小及频率的漂移。     

水喷射淬冷高温壁面的传热实验研究

本文采用直接表面温度测量的方法对水喷射高温壁面的传热过程进行实验研究．系统地研究了射流出口速度、冷却水过冷度、喷嘴至加热面的间距、初始壁温以及水喷雾的流量密度等参数对淬冷表面的膜态沸腾、最小临界点、过渡沸腾、最大临界点等传热过程的影响，给出了有关实验结果，分析了它们的特点。     

Radiative lifetimes of excited W II levels

Radiative lifetimes of 19 selected W II levels with energies between 36 000 cm^-1 and 55 000 cm^-1 have been measured with the time-resolved laser-induced fluorescence technique. The ions are generated in a hollow cathode discharge and stored in a linear Paul trap. Selected states are populated with tunable dye laser pulses and the subsequent fluorescence is measured by means of a 5 Gigasample transient digitizer and a fast photodetector with a risetime of 700 ps. By taking into account both the temporal profile of the laser pulses and the separately measured response function of the system, the lifetime can be determined from the full decay curve. A refined evaluation procedure, taking into account saturation effects in the signals, reduces the uncertainty in our data to around 1%. Received: 30 July 1998 / Revised: 18 August 1998     

半导体冰箱冷热端散热条件实验研究

半导体制冷器件是一种高热流密度元件,在红外测量、低温超导、生物医学、空间技术等领域有重要的应用,还可开发成专用制冷装置,适用于野外施工、勘探,考古以及郊游等户外活动食品饮料的保鲜,也可用于食品、饮料及医用疫苗等的冷藏。在给定工况下,通过改善半导体器件的冷热端散热条件,可使系统制冷量和制冷性能系数大幅提高。本文设计了实验装置,特别设计了8种实验工况对采用强迫对流换热和热端采用热管换热器散热的实际半导体制冷装置进行了实验分析,提出了改善半导体制冷元件散热条件的具体措施。     

非简并Λ型三能级原子的速度选择相干布居俘获

研究了非简并Λ型三能级原子速度选择相干布居俘获与原子能级结构的非对称性以及原子-激光失谐之间的关系.指出相对于简并、共振情况，原子动量分布的概率峰峰值降低、最可几动量发生变化，而且原子的俘获时间也变得很长.     

Fractionation of HDPE on quench cooling

In a previous paper we discussed co-crystallization in a LDPE/HDPE blend using TREF and DSC. As part of that study it was observed that pure HDPE showed an unexpected fractionation behavior when quench crystallized in TREF. The overall peak broadened and two peaks appeared instead of the previously observed single peak for slow cooled HDPE.The development of two peaks was observed for all commercial HDPEs investigated, independent of their melting indices and densities. TREF and GPC were used in an attempt to evaluate the origin of the two HDPE components.The authors appreciate support from CAPES-BRAZIL (C.A.F.). Additional thanks go to Dr. G. W. Knight in Dow Chemical Company for kindly providing the polymer samples and performing the GPC analysis.     

Production of a bose einstein condensate of metastable helium atoms

We recently observed a Bose-Einstein condensate in a dilute gas of ⁴He in the 2³S₁ metastable state. In this article, we describe the successive experimental steps which led to the Bose-Einstein transition at 4.7 μK: loading of a large number of atoms in a MOT, efficient transfer into a magnetic Ioffé-Pritchard trap, and optimization of the evaporative cooling ramp. Quantitative measurements are also given for the rates of elastic and inelastic collisions, both above and below the transition. Received 15 October 2001     

HIRFL–CSRm纵向随机冷却——Palmer冷却研究

对拟在HIRFL-CSRm上建造的纵向Palmer冷却进行了数值优化计算,得出了最佳带宽、最佳增益及最短冷却时间,并运用Fokker-Planck方程进行了模拟,得到了动量散度分布函数在冷却过程中随时间的变化,从而为纵向冷却系统的具体设计和优化提供了重要的理论依据.     

高压下Pd82Si18合金凝固过程中形成的亚稳相

 使用X射线衍射、差热分析、透射电镜及Ｘ射线能谱分析，研究了Pd₈₂Si₁₈合金在高压下的凝固特点及所形成的相的结构和稳定性。在5.5 GPa压力下以100 K/s的冷却速率淬火，得到了面心立方结构钯硅固溶体（MS-Ⅰ），其点阵常数为a=0.388 3 nm。与钯硅固溶体共存的还有另一未知结构亚稳相（MS-Ⅱ）。在700 K时上述亚稳相转变成平衡相Pd+Pd₃Si。