Compatibility and stability tests of risperidone with soft-drinks by isothermal titration microcalorimetry

Isothermal titration microcalorimetry has been applied to investigate the compatibility testing of risperidone oral solution with soft-drinks and the interaction with tea tannin such as (–)-epigallocatechin, (–)-epicatechin, theaflavin and their gallates. In aqueous solution, risperidone was exothermically bound to tea tannin with binding affinity (10³–10⁴ M^–1), small enthalpy and entropy changes reflecting van der Waal’s interaction to form an insoluble complex at 1:1 molar ratio. The heat effect of risperidone titrated into soft-drinks containing tannin was exothermic and proportional to the quantity of the complex. While, no significant heat effect was found for risperidone titrated into a pet-bottled water and an infusion of parched barley without tea tannin. These results were agreed with stability testing of risperidone in some soft-drinks by HPLC method.     

Fluorescence Analysis in Microarray Technology

Fluorescence has been the preferred choice for data quantification in biomedical microarray formats since their earliest days. As much as the formats have grown and evolved over the years, the methods in optical analysis have become ever more sophisticated and complex in order to produce more and better output. This review will provide an insight into the most common methods and the state-of-the-art of all areas in microarray fluorescence analysis. Starting with an overview on microarray formats with a focus on their demands on the readout, the most common and useful organic fluorescent stains are discussed before proceeding on to other approaches; the use of semiconductor nanocrystals (quantum dots), polymer and silica nanoparticles and fluorescent proteins. Ways to enhance the intrinsically low signal on biochips have become increasingly important as they offer a sound approach towards the detection of low concentration sample content. The three main categories are presented: amplification using DNA, enzymes, and dendrimers. As much diversity as on the microarrays themselves can be found at the detection device. Standard optical microarray detectors, and non-standard methods using fluorescence anisotropy, fluorescence lifetime imaging (FLIM) and fluorescence resonance energy transfer (FRET), and their advantages and disadvantages are discussed.     

Molecular fractionation in isotactic polypropylene during isothermal crystallization

The nucleation frequency of isotactic polypropylene shows for certain molecular weight distributions during isothermal crystallization a “stepwise” development of the nuclei as a function of time. The resulting curve can be fitted by a superposition of exponential functions assuming a separate nucleation density for each nucleation step. The multimodal nucleation is discussed as a consequence of molecular fractionation effects during crystallization. Received: 23 October 1997 Accepted: 12 May 1998     

聚丙烯/纳米蒙脱土复合材料的结晶动力学研究

采用热分析方法，研究了聚丙烯／纳米蒙脱土复合材料（PP／CLAY）的等温结晶行为，并分别用Avrami方程和赵志英方法对所得数据进行了分析，研究结果表明，纳米蒙脱土微粒对聚丙烯等温和非等温结晶行为均有不同程度的影响，可提高聚丙烯的结晶速率并改善结晶结构。     

Dual‐Amplification of Antigen–Antibody Interactions via Backfilling Gold Nanoparticles on (3‐Mercaptopropyl) Trimethoxysilane Sol‐Gel Functionalized Interface

A new dual‐amplification strategy of electrochemical signaling from antigen–antibody interactions was proposed via backfilling gold nanoparticles on (3‐mercaptopropyl) trimethoxysilane sol‐gel (MPTS) functionalized interface. The MPTS was employed not only as a building block for the electrode surface modification but also as a matrix for ligand functionalization with first amplification. The second signal amplification strategy introduced in this study was based on the backfilling immobilization of nanogold particles to the immunosensor surface. Several coupling techniques, such as with nanogold but not MPTS or with MPTS but not nanogold, were investigated for the determination of carcinoembryonic antigen (CEA) as a model, and a very good result was obtained with nanogold and MPTS coupling immunosensor. With the noncompetitive format, the formation of the antigen–antibody complex by a simple one‐step immunoreaction between the immobilized anti‐CEA and CEA in sample solution introduced membrane potential change before and after the antigen–antibody interaction. Under optimal conditions, the proposed immunosensor exhibited a good electrochemical behavior to CEA in a dynamic concentration range of 4.4 to 85.7 ng/mL with a detection limit of 1.2 ng/mL (at 3 δ). Moreover, the precision, reproducibility and stability of the as‐prepared immunosensor were acceptable. Importantly, the proposed methodology would be valuable for diagnosis and monitoring of carcinoma and its metastasis.     

Rigid-body dynamics in the isothermal-isobaric ensemble: a test on the accuracy and computational efficiency

We have developed a time-reversible rigid-body (rRB) molecular dynamics algorithm in the isothermal-isobaric (NPT) ensemble. The algorithm is an extension of rigid-body dynamics [Matubayasi and Nakahara, J Chem Phys 1999, 110, 3291] to the NPT ensemble on the basis of non-Hamiltonian statistical mechanics [Martyna, G. J. et al., J Chem Phys 1994, 101, 4177]. A series of MD simulations of water as well as fully hydrated lipid bilayer systems have been undertaken to investigate the accuracy and efficiency of the algorithm. The rRB algorithm was shown to be superior to the state-of-the-art constraint-dynamics algorithm SHAKE/RATTLE/ROLL, with respect to computational efficiency. However, it was revealed that both algorithms produced accurate trajectories of molecules in the NPT as well as NVT ensembles, as long as a reasonably short time step was used. A couple of multiple time-step (MTS) integration schemes were also examined. The advantage of the rRB algorithm for computational efficiency increased when the MD simulation was carried out using MTS on parallel processing computer systems; total computer time for MTS-MD of a lipid bilayer using 64 processors was reduced by about 40% using rRB instead of SHAKE/RATTLE/ROLL.     

Performance validation of step-isothermal calorimeters

Isothermal calorimetry is becoming indispensable as a tool for the study of a wide variety of systems. As with all scientific instruments it is essential that robust calibration routines be developed in order to validate the data obtained. Chemical test reactions offer many advantages over (the traditionally used) joule effect heating methods, not least because they have the potential to validate instrument performance (i.e. they can be used to assess all aspects of calorimeter operation). In this work the results of a validation exercise, conducted by Thermal Hazard Technology as part of an installation routine, using the base catalysed hydrolysis of methyl paraben are discussed. In the case described, a systematic misreporting of the reported temperature of a calorimeter was identified, caused by an upgrade to the calorimeter's firmware, a discrepancy which may not have been noted using traditional electrical calibration methods and one which highlights the importance of both manufacturers and end-users adopting chemical test reactions into their test and validation routines.     

Application of microcalorimetry to the formulation study

Isothermal microcalorimetry was used to evaluate excipient compatibility of solid dosage form. Oxybutynin hydrochloride and cefaclor were used as model drugs for compatibility test with excipients. The calorimetric data for compatibility test were compared with those of HPLC data. Evaluation of compatibility between drug and excipient of solid dosage form might be possible to use isothermal microcalorimetry instead of conventional method. By using microcalorimetric method, the evaluation of the compatibility between drug and excipient could be successfully performed with a simple operation in a short time. The application of the isothermal microcalorimetry would be useful for the screening test of the drug compatibility with excipients.     

Binary mixtures of cyclohexanone, 2-butanone, 1,4-dioxane and 1,2-dimethoxyethane

Densities and sound velocities of binary mixtures of cyclohexanone, 2-butanone, 1,4-dioxane and 1,2-dimethoxyethane were measured at 298.15 K and also the densities at 303.15 K. Excess volumes were determined from densities. Isentropic compressibilities were determined from densities and sound velocities, and excess thermal expansion factors were determined from excess volumes of two temperatures. Excess isothermal compressibilities and excess isochoric heat capacities were then estimated using excess isobaric heat capacities previously reported. Excess volumes and excess isentropic and isothermal compressibilities were negative except for cyclohexanone+1,4-dioxane system. This revised version was published online in August 2006 with corrections to the Cover Date.     

Dynamics of joint adsorption of mutually soluble substances by activated carbons

A model for the dynamics of isothermal absorption of a binary mixture of an organic substance, soluble in water, and water vapor in a fixed bed of activated carbon was proposed. It includes the equations of material balance and the Myers—Prausnitz model for equilibrium adsorption. The possibility of formation of the condensed phase during the adsorption of an organic substance on moist activated carbon was shown. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1491–1495, August, 1998.