大口径衍射光栅10 ps激光损伤阈值测量（英）

在采用啁啾脉冲放大技术的高功率短脉冲激光装置中,终端衍射光栅的损伤阈值是限制装置输出能力的瓶颈之一。提出了测量大口径光栅损伤阈值的方法。该方法通过在线监测采集大口径光斑的同发近场光强分布情况和相应的光栅损伤图像,并经过一系列后期图像数据处理,建立起能量与损伤点的对应关系,经过一个测试光斑便可获得所有通量下的光栅损伤特性。该测量方法对光斑均匀性没有硬性要求,为损伤测量装置中难以解决的光斑均匀性问题提出了新的应对思路和方法。     

冲击波作用下LY12铝合金结构毁伤的数值模拟

针对冲击波作用下的结构毁伤判据问题,利用LS-DYNA软件,对LY12铝合金平板结构的损伤过程进行了数值模拟。讨论了冲击波超压、正压作用时间、材料屈服强度和结构自振频率等因素对结构破坏的影响规律,提出了一个以超压为函数,以正压作用时间、材料屈服强度和结构自振频率为参量的破坏判据,与实验结果比较,该判据吻合程度较高。     

基于匹配追踪算法的复合材料冲击损伤成像技术

基于Lamb波和匹配追踪算法,提出了一种损伤成像方法,对复合材料冲击损伤进行在线的连续监测。首先针对Lamb波监测的特点,提出了匹配追踪方法的快速实现方案,将信号分解为多个Chirplet原子的线性组合,建立了Lamb的弥散效应与Chirplet原子的调频斜率之间的关系,模拟结果表明Chirplet原子能准确地匹配失真变形的窄带脉冲信号;根据损伤前与损伤后的信号差别,提出了一种基于Lamb波能量特征差异提取的损伤指标;进一步采用改进的RAPID算法进行损伤成像,将损伤情况可视化。结果表明所提方法可行和有效。     

延性材料的损伤断裂

以细观统计损伤理论为基础 ,对材料受冲击载荷作用下初期损伤的成核成长效应进行了定量计算。得到了不同动载荷作用下从损伤成核到成长阶段转换的特征时间 ,并把它应用于Johnson提出的延性材料的损伤断裂模型 ,减小了原模型中的模型参数初始损伤度的随意性 ,增加了Johnson模型的确定性与可预测性。用改进后的模型计算不同冲击速度下OFHC铜的损伤断裂 ,计算结果与实测结果吻合较好。     

激光辐射CCD的破坏机理分析

研究了国内外关于激光辐照CCD及其相似材料结构导致的各种效应, 特别是软硬破坏效应, 给出了各种破坏的阈值及实验方式; 对各种破坏机理及理论模型进行了对比分析。     

Osteosarcoma Stem Cell Potent Gallium(III)-Polypyridyl Complexes Bearing Diflunisal

We report the anti-osteosarcoma stem cell (OSC) properties of a series of gallium(III)-polypyridyl complexes ( 5 - 7 ) containing diflunisal, a non-steroidal anti-inflammatory drug. The most effective complex within the series, 6 (containing 3,4,7,8-tetramethyl-1,10-phenanthroline), displayed similar potency towards bulk osteosarcoma cells and OSCs, in the nanomolar range. Remarkably, 6 exhibited significantly higher monolayer and sarcosphere OSC potency (up to three orders of magnitude) than clinically approved drugs used in frontline (cisplatin and doxorubicin) and secondary (etoposide, ifosfamide, and carboplatin) osteosarcoma treatments. Mechanistic studies show that 6 downregulates cyclooxygenase-2 (COX-2) and kills osteosarcoma cells in a COX-2 dependent manner. Furthermore, 6 induces genomic DNA damage and caspase-dependent apoptosis. To the best of our knowledge, 6 is the first metal complex to kill osteosarcoma cells by simultaneously inhibiting COX-2 and damaging nuclear DNA.     

Ballistic Impact Behaviour of Glass/Epoxy Composite Laminates Embedded with Shape Memory Alloy (SMA) Wires

This paper aims to estimate the enhancement in the energy absorption characteristics of the glass fiber reinforced composites (GFRP) by embedding prestrained pseudo-elastic shape memory alloy (SMA) that was used as a secondary reinforcement. The pseudo-elastic SMA (PE-SMA) embedded were in the form of wires and have an equiatomic composition (i.e., 50%–50%) of nickel (Ni) and titanium (Ti). These specimens are fabricated using a vacuum-assisted resin infusion process. The estimation is done for the GFRP and SMA/GFRP specimens at four different impact velocities (65, 75, 85, and 103 m/s) using a gas-gun impact set-up. At all different impact velocities, the failure modes change as we switch from GFRP to SMA/GFRP specimen. In the SMA/GFRP specimen, the failure mode changed from delamination in the primary region to SMA-pull out and SMA deformation. This leads to an increase in the ballistic limit. It is observed that energy absorbed by SMA/GFRP specimens is higher than the GFRP specimens subjected to the same levels of impact energy. To understand the damping capabilities of SMA embedment, vibration signals are captured, and the damping ratio is calculated. SMA dampens the vibrations imparted by the projectile to the specimen. The damping ratio of the SMA/GFRP specimens is higher than the GFRP specimens. The damping effect is more prominent below the ballistic limit when the projectile got rebounded (65 m/s).     

光学元件亚表面缺陷结构的蚀刻消除

针对强激光光学元件的应用要求,对光学材料在研磨和抛光过程中形成的亚表面缺陷进行了分析,并借鉴小工具数控抛光和Marangoni界面效应,提出采用数控化学刻蚀技术来实现光学表面面形和微结构形貌的高精度加工,对亚表面缺陷具有很好的克服和消除作用。通过实验对亚表面缺陷的分布位置和特性进行了分析,同时实验验证了在静止和移动条件下Marangoni界面效应的存在,对材料的定量去除进行了实验,提出了亚表面缺陷的去除方法。     

双离子束溅射沉积HfO­­2光学薄膜的研究

用双离子束溅射沉积氧化铪光学薄膜,并对此工艺下制备的氧化铪薄膜进行了光学性质、残余应力、结构特性以及激光损伤特性的研究。实验结果表明,用双离子束溅射沉积的氧化铪薄膜不仅结构均匀,膜层致密,无定形结构,而且具有极低的散射和吸收,均匀的非晶结构,杂质缺陷少,激光损伤阈值高。     

Q开关Nd:YAG脉冲激光对红外滤光片的损伤效应

介绍了由滤光片膜层结构决定的激光在光学薄膜中形成温度场及驻波场特性。用1.06μm调Q Nd:YAG激光器,在激光脉冲宽度10ns和光斑直径0.61μm的条件下,进行了激光辐照红外滤光片的损伤特性实验研究。根据脉冲激光辐照红外滤光片后样品损伤分析,发现滤光片的最初损伤发生在里面的膜层中,从而在实验上验证了计算得到的滤光片膜层中存在其温度场及驻波场的结果。它对提高红外滤光片的抗激光辐照能力研究具有一定的参考价值。