Sensitively electrochemical detection of the DNA damage in situ by electro-Fenton reaction based on Fe@Fe2O3 core-shell nanonecklace and multi-walled carbon nanotube composite

An electrochemical biosensor for mimicking the metal-mediated DNA damage pathway in situ was presented. The Fenton reagents (H₂O₂ and iron ion) for the DNA damage were generated in situ with a constant rate from the sensing film. H₂O₂ and iron ion reacted further together to yield hydroxyl radical, which attacked DNA in the film. These courses of DNA damage were just like those happened in organism. The DNA damage was detected by monitoring the differential pulse voltammetric response of an electrochemical indicator, Co(phen)₃³⁺. Another electrochemical indicator, Ru(NH₃)₆³⁺, was also used for monitoring the DNA damage as a complementary means and the minimal detectable amount of DNA damage was 0.16 μg. The biosensor had good reproducibility. After this biosensor was used for 11 times, 90% of the first detection signal was obtained.     

高应变率大变形下的聚丙烯/尼龙共混高聚物损伤型本构特性

对两种采用不同相容剂的聚丙烯（PP）和尼龙（PA）共混高聚物材料在大变形下的粘弹性力学行为进行研究,着重考察应变率效应和损伤的演化,从而分析不同的界面分子设计对共混体系材料宏观性能的作用。在准静态及冲击实验研究的基础上,基于ZWT非线性粘弹性模型,并结合了遗传算法,分别得到了能有效描述两种共混高聚物大变形阶段计及损伤的非线性粘弹性本构关系。两种材料在不同加载条件下表现出明显不一致的性能,原因在于其损伤演化的率相关性,且两种材料的大变形机制存在一定的差别,能用ZWT方程进行描述的范围也不一样。     

梯度膜作为高功率激光反射膜的初步研究

 对渐变折射率薄膜替代均匀膜系作为高功率激光反射膜的可行性进行了理论研究。以较容易获得的线性共蒸法制备的光学膜在中心波长为1 064 nm的激光作用为例,分析了薄膜与基体之间波长的匹配、场强分布等问题。提出了通过改变微小单元获得梯度膜匹配厚度的数值方法,将之运用在14个周期结构的梯度膜中,并由膜系计算软件验证了所获得结果。最后通过分析Maxwell方程,计算了梯度膜中与薄膜损伤密切相关的电场强度分布。结果表明：周期性结构梯度高反射膜中的电场分布与传统高反射膜具有相似性,但相对于传统高反射膜容易在界面处出现损伤的情形而言,梯度膜更容易在表面出现损伤,使梯度膜表面反射相移接近π是高功率梯度高反射膜的设计方向。     

直流磁控溅射沉积含He钛膜的研究

研究了用He/Ar混合溅射气体的直流磁控溅射制备钛膜中，He的掺入现象.分析结果表明，大量的He原子（He/Ti原子比高达56%）被均匀地引入到Ti膜中，其He含量可由混合溅射气体的He分量精确控制.通过调节溅射参数，可实现样品中He的低损伤引入.研究还发现，溅射沉积的含氦Ti膜具有较高的He成泡剂量和高的固He能力，这可能是溅射沉积形成了纳米晶Ti膜所致.纳米晶Ti膜较粗晶材料具有很高浓度的He捕陷中心，使He泡密度增大而泡尺寸减小.随He引入量的增加，Ti膜的晶粒尺寸减小，He引起的晶体点阵参数和X射线衍射峰宽度增大，晶体的无序程度增加.Helium trapping in the Ti films deposited by DC magnetron sputtering with a He/Ar mixture was studied. He atoms with a surprisingly high concentration (He/Ti atomic ratio is as high as 56%)incorporate evenly in deposited film. The trapped amount of He can be controlled by the helium partial amount. The introduction of the helium with no extra damage(or very low damage) can be realized by choosing suitable deposition conditions. It was also found that because of the formation of nanophase Ti film a relative high He flux for bubble formation is needed and the amount of the retain He in sputtering Ti films is much higher than that in the coarse grain Ti films. The nanophase Ti film can accommodate larger concentration of trapped sites to He, which results in a high density and small size of the He bubbles. With the increasing He irradiation flux, the grain size of Ti film decreases and the lattice spacing and width of the X ray diffraction peak increase due to the He introduction, and the film tends to amorphous phase.     

含损伤黏弹性阻尼加筋层合板声功率和指向性变异

该文旨在研究损伤位置和程度对自由阻尼加筋层合板声辐射功率和指向性的影响.基于Mindlin和Timoshenko梁理论,建立了自由阻尼层合板-梁组合结构有限元模型.数值求解四边简支边界条件自由阻尼加筋层合板振动响应,继而通过Rayleigh积分计算加筋层合板辐射声功率和指向性.将计算得到的前4阶模态固有频率、声辐射功率...     

MICROMECHANICAL MODELLING OF STRAIN SOFTENING IN MICROCRACK-WEAKENED QUASI-BRITTLE MATERIALS

By using the concept of domain of microcrack growth(DMG),themicromechanisms of damage in quasi-brittle materials subjected to triaxial either tensileor compressive loading are investigated and the complete strew-strain relation includingfour stages is obtained from micromechanical analysis.The regime of pre-peaknonlinear hardening corresponds to the distributed damage,i.e.the stable propagationof microcracks.After the attainment of the ultimate strength of load-bearing capacity,some microcracks experience the second unstable growth and the distributed damage istransmitted to the localization of damage.These analyses improve our understanding ofthe hardening and softening behaviors of quasi-brittle materials.     

活性Whipple结构超高速撞击防护性能实验研究

以二级轻气炮作为加载手段,针对以PTFE/Al活性材料为防护屏的Whipple防护结构,开展不同弹丸尺寸、不同碰撞速度的超高速撞击实验。利用激光阴影照相设备,获得并分析了碎片云特性;通过回收的防护结构靶板,研究了活性材料防护结构超高速撞击条件下的后板损伤特性;通过与经典Christiansen撞击极限方程对比,获得活性材料Whipple结构防护性能,并拟合得到新型防护结构的撞击极限曲线。结果表明,相较于同面密度铝合金材料,活性材料超高速撞击条件下的冲击起爆反应使得碎片云中具有侵彻能力的碎片大幅减少,从而显著提升航天器的防护能力,撞击速度为2.31 km/s时最大可提升45%。     

基于高斯曲率极值点的桥梁结构损伤识别方法

目前中小桥梁日常安全巡检存在对检查人员依赖性高、缺乏可量化的科学依据等不足.针对这些问题,本文提出了一种利用高斯曲率极值点对结构进行损伤识别的方法.将桥面视为受弯弹性薄板,根据弹性薄板的弯曲理论得到了在荷载作用下结构刚度变化与桥面弯曲程度(高斯曲率)的理论关系,并由此推导了高斯曲率对结构刚度损伤的敏感程度公式.通过有限...     

外加偏置电场下类金刚石薄膜激光损伤形貌

使用非平衡测控溅射技术沉积了类金刚石薄膜,对比了外加偏置电场前后薄膜的抗激光损伤表面形貌变化,发现薄膜施加偏置电场后,薄膜的激光损伤区域内有大量丝状薄膜,损伤形貌存在明显不同,损伤面积减小,薄膜的激光损伤情况得到改善。这表明外加偏置电场对薄膜的损伤有影响,激光在薄膜中激励产生的光生电子在电场作用下产生快速漂移,间接降低了激光辐照区域内的局部能量密度,减缓了薄膜的石墨化,提高了薄膜的抗激光损伤能力。