激光对红外系统的失效机理和破坏效应研究

根据红外光学系统的会聚特性,用光学增益方法分析了红外系统中各元件对应的光强分布,确定了位于焦面附近光学元件是激光破坏的易损部件,并提出了强激光对红外系统元件损伤,造成其探测、制导功能失效的硬破坏机理;由红外滤光片、探测器和信号处理电路与入射激光波长的光谱响应分析,提出了弱激光对红外系统干扰,导致其探测、制导功能在激光辐照一段时间内失效的软破坏机理;开展了激光辐照红外系统的失效验证实验,较好地解释了其失效的机理和效应。     

One Way Traffic: Base-to-Backbone Hole Transfer in Nucleoside Phosphorodithioate

The directionality of the hole-transfer processes between DNA backbone and base was investigated by using phosphorodithioate [P(S⁻)=S] components. ESR spectroscopy in homogeneous frozen aqueous solutions and pulse radiolysis in aqueous solution at ambient temperature confirmed initial formation of G^.+-P(S⁻)=S. The ionization potential of G-P(S⁻)=S was calculated to be slightly lower than that of guanine in 5′-dGMP. Subsequent thermally activated hole transfer from G^.+ to P(S⁻)=S led to dithiyl radical (P-2S^.) formation on the μs timescale. In parallel, ESR spectroscopy, pulse radiolysis, and density functional theory (DFT) calculations confirmed P-2S^. formation in an abasic phosphorodithioate model compound. ESR investigations at low temperatures and higher G-P(S⁻)=S concentrations showed a bimolecular conversion of P-2S^. to the σ²-σ*¹-bonded dimer anion radical [-P-2S 2S-P-]⁻ [ΔG (150 K, DFT)=−7.2 kcal mol⁻¹]. However, [-P-2S 2S-P-]⁻ formation was not observed by pulse radiolysis [ΔG° (298 K, DFT)=−1.4 kcal mol⁻¹]. Neither P-2S^. nor [-P-2S 2S-P-]⁻ oxidized guanine base; only base-to-backbone hole transfer occurs in phosphorodithioate.     

Logging damage and injured tree mortality in tropical forest management

Using insights from the forest ecology literature, we analyze the effect of injured trees on stand composition and carbon stored in above‐ground biomass and the implications for forest management decisions. Results from a Faustmann model with data for a tropical forest on Kalimantan show that up to 50% of the basal area of the stand before harvest can consist of injured trees. Considering injured trees leads to an increase in the amount of carbon in above‐ground biomass of up to 165%. These effects are larger under reduced impact logging than under conventional logging. The effects on land expectation value and cutting cycle are relatively small. The results suggest that considering injured trees in models for tropical forest management is important for the correct assessment of the potential of financial programs to store carbon and conserve forest ecosystem services in managed tropical forests, such as reducing emissions from deforestation and forest degradation and payment for ecosystem services. Recommendations for Resource Managers

• Considering the role of injured trees is important for managing tropical forests
• These trees can cover up to 50% of basal area and contain more than 50% of the carbon stored in above‐ground biomass
• Reduced impact logging leads to a larger basal area of injured trees and more carbon stored in injured trees than conventional logging
• Injured trees play an important role when assessing the potential for carbon storage in the context of payment for forest ecosystem services.

     

Quantitative analysis of oxidative DNA damage induced by high-voltage pulsed discharge with cavitation

Pulsed discharge is used for sterilization and disinfection, but the details of the molecular mechanisms remain largely unknown. Since pulsed discharge generates reactive oxygen species (ROS), we analyzed the oxidative DNA damages after pulsed discharge treatment to consider the involvement of ROS in the damaging process. We applied pulsed discharge with cavitation to plasmid DNA molecules and estimated the yields of the damages by agarose gel electrophoresis. The treated DNA contained various oxidative DNA damages, including single and double strand breaks and base lesions. The yields of the damages increased in response to the energy used for pulsed discharge. We also measured the yield of 8-hydroxyguanine (8-OH-G), one of the major oxidative base lesions, in the treated plasmid DNA by mass spectrometry quantitatively and found that the yield of the oxidative base lesion corresponded to the increment of the applied energy. In addition, we observed the involvement of mutM gene, which is responsible for repair of 8-OH-G, in the increased sensitivity of Escherichia coli to pulsed discharge. Therefore, ROS seem to mediate the sterilization ability of pulsed discharge.     

Synthetic Diphenylacetylene-Based Retinoids Induce DNA Damage in Chinese Hamster Ovary Cells without Altering Viability

All-trans-retinoic acid (ATRA), the active metabolite of vitamin A, plays a pivotal role in cell differentiation, proliferation and embryonic development. It is an effective therapy for dermatological disorders and malignancies. ATRA is prone to isomerization and oxidation, which can affect its activity and selectivity. Novel diphenylacetylene-based ATRA analogues with increased stability can help to overcome these problems and may offer significant potential as therapeutics for a variety of cancers and neurodegenerative diseases, including amyotrophic lateral sclerosis. Here, we investigated the effects of these retinoids on cell viability and genotoxicity in the widely used model system of the rapidly proliferating Chinese hamster ovary cell line. DC360 is a fluorescent ATRA analogue and DC324 is a non-active derivative of DC360. EC23, DC525, DC540, DC645, and DC712 are promising analogues with increased bioactivity. The cytotoxic activity of the compounds was evaluated by ATP assay and DNA damage was tested by comet assay. No cytotoxicity was observed in the 10⁻⁶–10⁻⁵ M concentration range. All compounds induced DNA migration similar to ATRA, but DC324, DC360 and EC23 did so to a greater extent, particularly at higher concentrations. We believe that retinoid receptor-independent genotoxicity is a general characteristic of these compounds; however, further studies are needed to identify the molecular mechanisms and understand their complex biological functions.     

基于改进云推理算法的塔架结构损伤识别

为了解决塔架结构的损伤识别问题,提出了基于应变能和改进云推理算法的损伤识别方法。首先描述了云模型的基本理论和数字特征,并给出了模态应变能的基本公式;然后分析了X条件云发生器和Y条件云发生器的基本算法和运行步骤,借助灰云模型建立相应的前件云和后件云规则,考虑了测量噪声的影响,利用云发生器生成多组云滴,并利用多模式下云滴的确定度和生成值构建了基本云推理算法及其损伤识别指标。基本云推理算法中常会产生不均匀发散的云滴,从而使计算结果产生一定的偏差,为了降低云滴发散产生的偏差影响,提出了基于损伤模式数量加权的云推理改进策略。计算结果表明:云推理算法可以较好地应用于塔架结构的损伤识别,其识别结果明显优于传统的应变能耗散率指标方法;而改进云推理算法进一步提高了识别的精度,优于基本云推理算法。     

基于L1正则化的随机梁式结构静力损伤识别方法

提出了一种结合摄动法和L1正则化方法的随机梁式结构静力损伤识别方法。考虑初始模型误差和测量误差的影响,建立了关于随机损伤指数的控制方程,并将摄动法和L1正则化方法相结合,对随机损伤指数的控制方程进行求解,进而从概率的角度对结构的损伤进行识别。损伤试验结果表明,和传统的最小二乘求解法相比,本文方法能够更为准确地识别多处局部损伤的位置及大小,对实际结构损伤检测具有较好的参考价值。     

1 064 nm高反射薄膜激光损伤阈值测量方法

参照国际上对激光损伤阈值不同测量技术建立起来的相应检测规范和标准,分别采用1-on-1,S-on-1,R-on-1和光栅扫描共4种测量方式,在1 064 nm波长下对HfO2/SiO2周期性高反射薄膜进行了激光损伤阈值的测量研究。根据测量结果,比较并分析了这4种测量方式之间的差异,重点研究了R-on-1和光栅扫描测量方式中存在的激光预处理效应对薄膜损伤阈值的影响,以及辐照激光光斑尺寸与损伤阈值之间的联系,并讨论了光栅扫描方式中预处理效应与扫描间距和扫描能量密度梯度的关系。研究表明：R-on-1方式下测得的损伤阈值最高,光栅扫描和1-on-1次之,S-on-1最小;1 000个脉冲激光辐照下的累积效应不显著,并且在激光光斑尺寸的差异较小时,阈值与光斑尺寸的对应关系并不明显;光斑尺寸相同时,扫描光斑的间距越小,激光预处理效果越好。     

Damage monitor and life prediction of carbon fiber-reinforced ceramic-matrix composites at room and elevated temperatures using hysteresis dissipated energy-based damage parameter

In this paper, the damage monitor and life prediction of carbon fiber-reinforced ceramic-matrix composites (C/SiC CMCs) have been investigated using the hysteresis dissipated energy-based damage parameter. The evolution of the interface shear stress, hysteresis dissipated energy, hysteresis dissipated energy-based damage parameter and the broken fibers fraction vs. cycle number, the fatigue life S?N curves of unidirectional, cross-ply and 2.5D C/SiC composites at room temperature and 800 °C in air atmosphere have been analyzed. For unidirectional C/SiC, the hysteresis dissipated energy and hysteresis dissipated energy-based damage parameter first increase and then decrease with cycle number, and the fatigue limit stress decreases from 88% tensile strength at room temperature to 20% of the tensile strength at 800 °C in air atmosphere; for cross-ply C/SiC, the hysteresis dissipated energy and hysteresis dissipated energy-based damage parameter decrease with increasing applied cycles, and the fatigue limit stress decreases from 85% tensile strength at room temperature to 22% tensile strength at 800 °C in air; and for 2.5D C/SiC, the hysteresis dissipated energy and hysteresis dissipated energy-based damage parameter increases with cycle number, and the fatigue limit stress decreases from 70% tensile strength at room temperature to 25% tensile strength at 800 °C in air.