Improved performance of porous LiFePO4/C as lithium battery cathode processed by high energy milling comparison with conventional ball milling

Porous LiFePO₄ is synthesized and coated with amorphous carbon by using high energy nano-mill (HENM) processed solid-state reaction method. FeCl₃ (38%) containing water solution which is originated from pickling of steel scrap (waste liquid) is used as a source material in this study. The result indicates that LiFePO₄ powders are well coated with the amorphous carbon. HENM process successfully produces the porous LiFePO₄ with homogeneously distributed pores and a well networked carbon web, which delivers an enhanced electrochemical rate capability. HENM process is incorporated as an effective route for reducing particle size, distributing particle homogeneously and averting agglomeration of particles of precursor in this study. X-ray diffraction, scanning electron microscopy with elemental mapping, transmission electron microscopy with selected area (electron) diffraction, Raman spectroscopy, cyclic voltammetry, and galvanostatic charge/discharge are employed to characterize the final product. Electrochemical measurement shows that the synthesized LiFePO₄/C composite cathode delivers an initial discharge capacity of 161 mAhg⁻¹ at 0.1C-rate between 4.2 and 2.5 V. Remarkably, the cathode delivers 101.9 mAhg⁻¹ at high charge/discharge rate (10 C).     

Dielectric properties of tetragonal tungsten bronze films deposited by RF magnetron sputtering

Tetragonal tungsten bronze (TTB) films have been synthesised on Pt(111)/TiO₂/SiO₂/Si substrates from Ba₂LnFeNb₄O₁₅ ceramics (Ln = La, Nd, Eu) by RF magnetron sputtering. X-ray diffraction measurements evidenced the multi-oriented nature of films with some degrees of preferential orientation along (111). The dependence of the dielectric properties on temperature and frequency has been investigated. The dielectric properties of the films are similar to those of the bulk, i.e., ε ∼150 and σ ∼10⁻⁶ Ω⁻¹ cm⁻¹ at 1 MHz and room temperature. The films exhibit two dielectric anomalies which are attributed to Maxwell Wagner polarization mechanism and relaxor behaviour. Both anomalies are sensitive to post-annealing under oxygen atmosphere and their activation energies are similar E_a ∼0.30 eV. They are explained in terms of electrically heterogeneous contributions in the films.     

Mild Bioconjugation Through the Oxidative Coupling of ortho‐Aminophenols and Anilines with Ferricyanide

Using a small‐molecule‐based screen, ferricyanide was identified as a mild and efficient oxidant for the coupling of anilines and o‐aminophenols on protein substrates. This reaction is compatible with thiols and 1,2‐diols, allowing its use in the creation of complex bioconjugates for use in biotechnology and materials applications.     

An Unusual Triphenylphosphine Oxide Catalyzed Stereoselective 1,3‐Dichlorination of Unsaturated Ketoesters

An unusual Ph₃PO‐catalyzed stereoselective 1,3‐dicholorination of an unsaturated ketoester has been developed. The novel activation mode involved in this cascade reaction can promote consecutively elusive transformations. The products were obtained with good yields and excellent stereoselectivities. This reaction makes important complementation to the limitations associated with the field of dichlorination.     

Iron‐Catalyzed 1,2‐Addition of Perfluoroalkyl Iodides to Alkynes and Alkenes

Iron catalysis has been developed for the intermolecular 1,2‐addition of perfluoroalkyl iodides to alkynes and alkenes. The catalysis has a wide substrate scope and high functional‐group tolerance. A variety of perfluoroalkyl iodides including CF₃I can be employed. The resulting perfluoroalkylated alkyl and alkenyl iodides can be further functionalized by cross‐coupling reactions. This methodology provides a straightforward and streamlined access to perfluoroalkylated organic molecules.     

3D amorphous carbon and graphene co-modified LiFePO4 composite derived from polyol process as electrode for high power lithium-ion batteries

Amorphous carbon and graphene co-modified LiFePO_4 nanocomposite has been synthesized via a facile polyol process in connection with a following thermal treatment.Various characterization techniques,including XRD.Mossbauer spectra,Raman spectra,SEM,TEM,BET,O_2-TPO,galvano charge-discharge,CV and EIS were applied to investigate the phase composition,carbon content,morphological structure and electrochemical performance of the synthesized samples.The effect of introducing way of carbon sources on the properties and performance of LiFePO_4/C/graphene composite was paid special attention.Under optimized synthetic conditions,highly crystalized olivine-type LiFePO_4was successfully obtained with electron conductive Fe_2P and FeP as the main impurity phases.SEM and TEM analyses demonstrated the graphene sheets were randomly distributed inside the sample to create an open structured LiFePO_4 with respect to graphene,while the glucosederived carbon mainly coated over LiFeP04 particles which effectively connected the graphene sheets and LiFePO_4 particles to result in a more efficient charge transfer process.As a result,favorable electrochemical performance was achieved.The performance of the amorphous carbon-graphene co-modified LiFePO_4 was further progressively improved upon cycling in the first 200 cycles to reach a reversible specificcapacity as high as 97 mAh·g~(-1) at 10 C rate.     

ZnAl2O4 SiO2纳米复合催化剂用于无溶剂条件下乙酸酐与醇、酚和胺的乙酰化反应简

A ZnAl₂O₄@SiO₂ nanocomposite was prepared from metal nitrates and tetraethyl orthosilicate by the sol-gel process, and characterized by X-ray diffraction, Fourier transform infrared, transmission electron microscopy, and N₂ adsorption-desorption measurements. The nanocomposite was tested as a heterogeneous catalyst for the acetylation of alcohols, phenols, and amines under solvent-free conditions. Under optimized conditions, efficient acetylation of these substrates with acetic anhydride over the ZnAl₂O₄@SiO₂ nanocomposite was obtained. Acetylation of anilines and primary aliphatic amines proceeded rapidly at room temperature, while the reaction time was longer for the acetylation of alcohols and phenols, showing that an amine NH₂ group can be selectively acetylated in the presence of alcoholic or phenolic OH groups. The catalyst can be reused without obvious loss of catalytic activity. The catalytic activity of the ZnAl₂O₄@SiO₂ nanocomposite was higher than that of pure ZnAl₂O₄. The method gives high yields, and is clean, cost effective, compatible with substrates having other functional groups and it is suitable for practical organic synthesis.     

高效可回收多相催化剂SiO_2-Cu_2O催化伯胺和仲胺苄基化反应(英文)

A mild,effective,and selective procedure is reported for the mono N-benzylation and N,N-dibenzylation of primary amines as well as mono N-benzylation of secondary amines using silicasupported copper(I) oxide in water.The silica-supported Cu2O was generated in situ by the reaction of Fehling solution and glucose at 100 °C onto activated silica.The catalyst was filtered,washed with water,and oven-dried,and was characterized by Fourier transform infrared spectroscopy,thermogravimetric analysis,scanning electron microscopy,transmission electron microscopy,and atomic absorption spectroscopy.The prepared Cu2O-SiO2 was found to be thermally stable up to 325 °C.The copper was uniformly distributed onto the surface of the silica,and the mean particle diameter was 7 nm.The catalyst served as a selective heterogenous catalyst for the N-benzylation of primary and secondary amines.The catalyst is recyclable and was used effectively upto fifth run without a significant loss of catalytic activity.Various reaction solvents including water,acetonitrile,and toluene were screened for N-benzylation of amines,and the success of the aqueous system highlights the low environmental impact of the procedure.     

Octacyanidorhenate(V) Ion as an Efficient Linker for Hysteretic Two-Step Iron(II) Spin Crossover Switchable by Temperature,Light, and Pressure

A two-step hysteretic Fe^II spin crossover (SCO) effect was achieved in programmed layered Cs{[Fe(3-CNpy)₂][Re(CN)₈]}⋅H₂O ( 1 ) (3-CNpy=3-cyanopyridine) assembly consisting of cyanido-bridged Fe^II-Re^V square grid sheets bonded by Cs⁺ ions. The presence of two non-equivalent Fe^II sites and the conjunction of 2D bimetallic coordination network with non-covalent interlayer interactions involving Cs⁺, [Re^V(CN)₈]³⁻ ions, and 3-CNpy ligands, leads to the occurrence of two steps of thermal SCO with strong cooperativity giving a double thermal hysteresis loop. The resulting spin-transition phenomenon could be tuned by an external pressure giving the room-temperature range of SCO, as well as by visible-light irradiation, inducing an efficient recovery of the high-spin Fe^II state at low temperatures. We prove that octacyanidorhenate(V) ion is an outstanding metalloligand for induction of a cooperative multistep, multiswitchable Fe^II SCO effect.     

Enhancing Tris(pyrazolyl)borate-Based Models of Cysteine/Cysteamine Dioxygenases through Steric Effects: Increased Reactivities,Full Product Characterization and Hints to Initial Superoxide Formation

The design of biomimetic model complexes for the cysteine dioxygenase (CDO) and cysteamine dioxygenase (ADO) is reported, where the 3-His coordination of the iron ion is simulated by three pyrazole donors of a trispyrazolyl borate ligand (Tp) and protected cysteine and cysteamine represent substrate ligands. It is found that the replacement of phenyl groups—attached at the 3-positions of the pyrazole units in a previous model—by mesityl residues has massive consequences, as the latter arrange to a more spacious reaction pocket. Thus, the reaction with O₂ proceeds much faster and afterwards the first structural characterization of an iron(II) η²-O,O-sulfinate product became possible. If one of the three Tp-mesityl groups is placed in the 5-position, an even larger reaction pocket results, which leads to yet faster rates and accumulation of a reaction intermediate at low temperatures, as shown by UV/Vis and Mössbauer spectroscopy. After comparison with the results of investigations on the cobalt analogues this intermediate is tentatively assigned to an iron(III) superoxide species.