Superhydrophobic nickel films fabricated by electro and electroless deposition

In this work, a superhydrophobic nickel surface is fabricated by coupling electro and electroless deposition without chemical modification. SEM study reveals that electrodeposited nickel surface is characterized by nanocone arrays and has a contact angle of about 135°. After adding electroless deposition, as the second step, hemispherically topped nickel nanocone arrays are formed which leads to a high contact angle of 153.6°. That is, nickel surface has successfully transformed from hydrophobic to superhydrophobic. This transition is investigated both from the aspects of chemical composition and surface structure and proves the latter is the dominant factor. The present study inspires us to do more research about the creation of rough surfaces and enriches our comprehension about superhydrophobicity.     

Determination of Malathion Using Corona Discharge – Ion Mobility Spectrometry with Solid-Phase Microextraction

A corona discharge (CD) ion mobility spectrometer combined with solid-phase microextraction was constructed. The detection limit and stability of the system for malathion detection were improved using a novel sample introduction port through which the sample desorption was performed in high-temperature drift tube and the sample was introduced directly to the ionization area. The working parameters of the distance between CD needle tip and carrier gas outlet, the drift tube and carrier gas temperature, the carrier gas flow, and the voltage on CD needle were selected. When the extraction time for standard malathion was set to 5?min, the detection limit was 0.96?µg?L^?1 based on thrice the baseline noise, the linear range was 50–500?µg?L^?1, the correlation coefficient was approximately 0.9941, and the relative standard deviation was below 10%. Malathion-spiked lake water samples were analyzed using the developed system and the recovery was 92–102%. This method is suitable for the rapid detection of organophosphorus pesticide residues.     

Determination of different arsenic species in food‐grade spirulina powder by ion chromatography combined with inductively coupled plasma mass spectrometry

A “two‐step” pressurized microwave‐assisted extraction method coupled with ion chromatography with inductively coupled plasma mass spectrometry for the determination of different arsenic species in spirulina samples was developed. The extraction method used H₂O₂/H₂O (1:5, v/v) as solvent to extract all arsenic species except arsenite, which was extracted by using water as solvent. The extraction method had a satisfactory recovery (>96%) and took a short time (20.0 min). With our method, all arsenic species in spirulina samples were completely separated and determined with recoveries of 84–105% and relative standard deviations of 2–4%. Food‐grade spirulina powder samples from seven provinces (Inner Mongolia, Zhejiang, Fujian, Hainan, Yunnan, Jiangsu, and Guangxi) in China were analyzed using the optimized protocol. Arsenate was detected at the concentration range of 170–394 ng/g in all the spirulina samples. Dimethylarsinic acid was detected at the concentration range of 32–839 ng/g in spirulina from above‐six provinces except Guangxi. Monomethylarsonic acid (67 ± 3 ng/g) was detected only in spirulina from Yunnan province. Arsenite was detected at the concentration range of 28–147 ng/g in spirulina from above five provinces except Hainan and Guangxi. Five unknown organic arsenic species were found in spirulina from above six provinces except Guangxi.     

Low-phosporous nickel-coated carbon microcoils: Controlling microstructure through an electroless plating process

Carbon microcoils (CMCs) have been coated with a nickel-phosphorus (Ni-P) film using an electroless plating process, with sodium hypophosphite as a reducing agent in an alkaline bath. CMC composites have potential applications as microwave absorption materials. The morphology, elemental composition and phases in the coating layer of the CMCs and Ni-coated CMCs were investigated by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD), respectively. The effects of process parameters such as pH, temperature and coating time of the plating bath on the phosphorus content and deposition rate of the electroless Ni-P coating were studied. The results revealed that a continuous, uniform and low-phosphorous nickel coating was deposited on the surface of the CMCs for 20 min at pH 9.0, plating bath temperature 70 °C. The as-deposited coatings with approximately 4.5 wt.% phosphorus were found to consist of a mix of nano- and microcrystalline phases. The mean particle size of Ni-P nanoparticles on the outer surface of the CMCs was around 11.9 nm. The deposition rate was found to moderately increase with increasing pH, whereas, the phosphorous content of the deposit exhibited a significant decrease. Moreover, the material of the coating underwent a phase transition between an amorphous and a crystalline structure. The thickness of the deposit and the deposition rate may be controlled through careful variation of the coating time and plating bath temperature.     

Medium modified fragmentation function: equivalence of the ACSX and QW formalisms in the high-Q2 region

We study the medium modified fragmentation function in high-energy heavy-ion collisions. We show that the ACSX and QW formalisms are equivalent to each other in the high-Q² limit in both theoretical and numerical aspects.     

Cellulose-based carbon—A potential anode material for lithium-ion battery

A series of hard carbons was produced by the carbonization of microcrystalline cellulose powder in the temperature range of 950–1100 °C. The properties of the carbons were characterized using elemental analysis, X-ray diffraction and N₂ and CO₂ adsorption. The effect of heat-treatment temperature (HTT), pyrolytic carbon (PC) coating and discharging mode on the lithium insertion/deinsertion behavior of the carbons was assessed in a coin-type half-cell with metal lithium cathode. Increasing cellulose HTT modifies mostly carbon porosity, the surface area (S_DFT) decreases from about 500 to 167 m² g⁻¹. It is associated with lowering the reversible C_rev and irreversible C_irr capacities, but without improving relatively low (0.72) 1st cycle coulombic efficiency. Applying constant current (CC)+constant voltage (CV) discharging mode instead of conventional CC enhances the reversible capacity by 15–18%. PC coating is effective in reducing C_irr by ∼20% with a little change of C_rev. The best capacity parameters, C_rev of 458 mA h g⁻¹ and C_irr of 139 mA h g⁻¹, were measured for PC coated 1000 °C carbon. The prolonged cycling of full-cell assembled with anode of the carbon and commercial cathode revealed that after initial 20 cycles the capacity decay (0.029 mA h/cycle) is comparable to that of commercial cell with graphite-based anode.     

A combined crossed molecular beam and quasiclassical trajectory study of the Titan-relevant N(2D) + D2O reaction

Following a recent investigation on the N(²D) + H₂O reaction [Homayoon et al., J. Phys. Chem. Lett. 5, 3508 (2014)], we report on an experimental and theoretical study of the isotopologue N(²D) + D₂O reaction. Crossed molecular beam (CMB) experiments were conducted at a collision energy of 10.3 kcal mol^–1. Quasiclassical trajectory calculations were performed on a recent potential energy surface to derive the centre-of-mass functions necessary to simulate the CMB laboratory distributions. Excellent agreement was found. The importance of the channel leading to HON/DON was confirmed. The inclusion of this channel, in addition to that leading to the isomer HNO/DNO, can affect the models considering the coupling between nitrogen and oxygen chemistry in the upper atmosphere of Titan.     

Studies on the Thermodynamic and Kinetic Properties of the Reactions of Ti+ with Sulfur Transfer Reagent SCO Along the C═S Bond Activation Branch at 200–1200K

Theoretical studies on the thermodynamic and kinetic properties of the reactions of Ti⁺ with sulfur transfer reagent SCO via the C═S bond activation pathway have been carried on using DFT/B3LYP method, general statistical thermodynamics, and Eyring transition state theory with Wigner correction. The relevant reactions include reaction 1 ⁴ Ti⁺+¹SCO → ⁴ IM ₁ → ⁴ TS ₁ → ⁴ IM ₂ → ⁴ TiS⁺+ ¹ CO, and reaction 2 ⁴Ti⁺+¹SCO →⁴IM₁→ CP →²IM₂→²TiS⁺+¹CO in which the spin multiplicity changes from the quartet state to the doublet state in the crossing region. It is concluded that the increase of the temperature is favored to the reaction 1 process, since the equilibrium constants (K) rises from 0.566 × 10[P]-9 at 200 K to 0.109 × 10⁰ at 1200 K, and the reaction rate constant (k) from 0.222 × 10⁰ s[P]-1 at 200 K to 0.540 × 10 ¹¹ s[P]-1 at 1200 K. Moreover, reaction 1 is endothermic, and non-spontaneous in the way the entropy increases, while reaction 2 is exothermic and spontaneous in the way their entropy decreases. The reaction path 2 is the energetically favorable channel, and its thermodynamic data change not largely with the rise of temperature.