Technique for Monolithic Fabrication of Microlens Arrays Integrated with Infrared CCD

Based on scalar diffraction theory, 8-phase-level 256×256 elements diffractive microlens array with element dimension of 50×33 μm2 have been fabricated on the back-side of PtSi(3～5 μm) infrared CCD. The measurement results indicated that the ratio of the signal-to-noise of the infrared CCD with microlens was increased by a factor of 2.8.     

Fabrication and characterization of sputtered titanium dioxide films

TiO₂ thin films were prepared under various conditions by using a reactive RF sputtering technique. The structural, optical and electrical characteristics of the films have been investigated. All as-deposited films were amorphous. After annealing at T > 673 K, the crystallinity of the observed tetragonal anatase phase appeared improved. The optical band gap, determined by using Tauc plot, has been found to amount to 3.38 ± 0.03 and 3.21 ± 0.03 eV for the direct and indirect transition, respectively. Also the complex optical constants for the wavelength range 300-2500 nm are reported. Using the two-point probe technique, the dark resistivity has been measured as a function of the film thickness, d. The resistivity, ρ, of the samples has been found to decrease markedly with increasing thickness, but only for d < 100 nm. The behaviour of ρd versus d was found to fit properly with the Fuchs and Sondheimer relation with parameters ρ_o = 4.95 × 10⁶ Ω cm and mean free path, l = 310 ± 2 nm. The log ρ versus 1/T curves show three distinct regions with values for the activation energy of 0.03 ± 0.01, 0.17 ± 0.01 and 0.50 ± 0.02 eV, respectively.     

ToF-SIMS analysis of a fluorocarbon-grafted PET with a gold cluster ion source

Cluster ions have been recognized as a superb primary species in time of flight secondary ion mass spectroscopy (ToF-SIMS) compared with monatomic primary ions, as they significantly enhance the secondary ion yields from bulk samples. Self-assembled monolayers provide an important system for studying the fundamental mechanism involved in the yield enhancement.We used a gold cluster ion source to analyze a new type of self-assembled monolayer: a fluorocarbon-grafted polyethylene terephthalate. In addition to the structure details, which helped to understand the grafting mechanism, ToF-SIMS analysis revealed that fluorocarbon secondary ion yield enhancements by cluster ions were due to the enhanced sputter efficiency. A larger information depth may also be expected from the enhancement. Both mathematical definitions of damage cross-section and disappearance cross-section were revisited under a new context. Another cross-section parameter, sputter cross-section, was introduced to differentiate the beam induced sputter process from damage process.     

倒置结构锥形束计算机层析的精确成像与Grangeat算法实现

研究了一种新的圆加垂直单弧段的锥顶轨迹的锥形束计算机层析（CT）的完全性条件和精确重建的Grangeat方法，提出了倒置结构锥形束计算机层析的便于实现的圆加垂直多弧段的成像结构及进行精确重建的完全性条件。利用倒置成像结构与现有成像结构之间的等价关系，给出了倒置结构锥形束计算机层析的重建算法。最后，对上述几方面进行了计算机模拟。     

用离子速度影象技术研究n-C4H9Br的光解

利用离子速度影象技术研究了正一溴丁烷(n-C4H9Br)在231~267 nm波段的光解,得出了如下结论:正一溴丁烷(n-C4H9Br)在231~267 nm波段的吸收源于基态到三个最低激发态的跃迁,这三个激发态标识为1A″、2A′和3A′;发生在这三个排斥态的势能面(PES)上的光解最终导致C4H9 Br(2P3/2)或C4H9 Br*(2P1/2)的产生;2A′和3A′态之间存在避免交叉(Avoided crossing)会影响最终的光解产物;从基态1A′到激发态1A″的跃迁矩垂直于对称面,也就垂直于C-Br键;从基态1A′到激发态3A′的跃迁矩平行于对称面,同时平行于C-Br键;从基态1A′到激发态2A′的跃迁矩在对称面内,且与C-Br键成53.1°夹角.我们也讨论了正一溴丁烷(n-C4H9Br)在234 nm和267 nm附近光解时的避免交叉几率(Avoided crossingprobability),以及它对单通道相对产额(Relative fraction of the individual pathways)的影响.     

40Ar+诱导无定形碳到金刚石纳米晶相变的研究

通过60 keV的⁴⁰Ar⁺辐照无定形碳靶合成了大量尺寸不同的金刚石纳米颗粒.高分辨透射电子显微镜配合能量色散X射线谱和电子衍射以及Raman谱分析的结果表明，这些嵌于具有扰动石墨结构薄膜中的纳米金刚石颗粒，其成核率很高(约为10¹³/cm²)，而且可以生长到较大的尺寸，有的甚至可以达到微米量级.对其相转变过程也进行了初步探讨. 关键词： 离子束 金刚石纳米晶 相变 透射电子显微镜     

离轴球形粒子对高斯波束的散射光通量的计算

利用矢量球谐函数展开的方法,研究了离轴球形粒子对椭圆高斯波束的散射。根据其远区散射场的形式,得出了归一化散射场的斯托克斯参量(散射强度)与颗粒直径、折射率以及散射角的关系。建立了计算离轴球形粒子对高斯波束散射通量的解析模型,计算了散射光在任意散射方向上的光通量,得到了前向任意立体角内散射通量的计算公式,为激光散射探测提供了理论依据。     

红外耦合光学系统设计

红外目标模拟器由红外目标图像发生器和投影光学系统组成。该红外光学系统是一个要求与2个导引光学系统的光学技术参数相匹配的长焦距、大视场和具有像方远心光路的中红外光学系统。叙述用于红外目标模拟器的红外耦合光学系统的设计原理，提出它与导引光学系统一起可组成放大倍率M=4.5×的红外投影光学系统，并指出IR CRT产生的图像通过红外投影光学系统可成像在导引接收器上。针对给出的红外耦合光学系统的设计特点和技术要求，光学材料选取硅（Si） 锗（Ge） 硅（Si），采用简单的柯克三片式结构完成光学系统设计。设计评价结果表明，该系统的光学性能和成像质量均满足设计指标要求。     

低速高电荷态离子40Ar16+与云母表面作用中的电子发射研究

报道了由兰州ECR源提供的低速高电荷离子40Ar16 入射到云母表面产生的电子发射的实验测量结果.结果发现,电子发射产额Y与离子入射角ψ有近似1/tanψ的关系.基于经典过垒模型,我们对这一关系进行了理论分析.实验结果和理论结果相当符合,这就间接说明势能电子发射是低速高电荷态离子作用于表面发射电子的一个主要途径.     

Au/SiO2纳米多层薄膜的制备及其性质表征

利用多靶磁控溅射技术制备了Au/SiO₂纳米颗粒分散氧化物多层复合薄膜.研究了在保持Au单层颗粒膜沉积时间一定时薄膜厚度一定、变化SiO₂的沉积时间及SiO₂的沉积时间一定而改变薄膜厚度时，多层薄膜在薄膜厚度方向的微观结构对吸收光谱的影响.研究结果表明：具有纳米层状结构的Au/SiO₂多层薄膜在560 nm波长附近有明显的表面等离子共振吸收峰，吸收峰的强度随Au颗粒的浓度增加而增强，在Au颗粒浓度相同的情况下，复合薄膜 关键词： 2纳米复合薄膜')" href="#">Au/SiO₂纳米复合薄膜 多靶磁控溅射 吸收光谱 有效介质理论