准直孔法改善束流品质初探

本文提出了用准直孔结合调节束流导引磁场获得较好品质强流电子束的方法,运用该方法在1.5MeV直线感应加速器(LIA)进行了试验,结果准直束流前后沿明显减小,束亮度提高几倍;同时,用此方法测出了束密度及束亮度的径向分布.     

Numerical propagation of partially coherent laser beams through optical systems

The propagation of partially coherent beams through optical systems is computed numerically in one transverse dimension. The optical system is divided into different elementary segments, through which the propagation of light can be calculated by appropriate operators, working on the coherence function or the Wigner distribution function respectively. For the necessary changes between these two functions describing the partially coherent beams, the use of the remarkable z-transform seems to be an advantage. With this algorithm the grid and the resolution in the spatial frequency domain can be arbitrarily chosen in contrast to the usual Fourier transform, the influence of phase aberrations on the focusability of Gauss-Schell model beams is discussed as an application example of the numerical model. With the help of this tool, practical beam guiding systems can be simulated for use with multimode laser radiation.     

Skin-Depth Theory Explaining Anomalous Picosecond-Terawatt Laser Plasma Interaction II

The anomaly of ion emission at laser irradiation of targets measured by Badziak et al. was analyzed on the background of the extensive research in the past. In contrast to the irradiation with lasers of longer than 100 ps pulse duration, a drastic decrease of the maximum ion energies was measured with ps pulses. Very strange was the observation that the number of emitted fast ions was intensity independent. The usual ponderomotive or relativistic self-focusing theory and related processes could not explain the results. Instead a direct interaction within the skin depth of the irradiated target was concluded. This model confirms the plane geometry nonlinear force interaction in the ps range producing fast plasma blocks moving perpendicular off or into the target. The block moving into the target opens a new scheme of laser fusion by modifying the experiments of Norreys et al. The use of relatively low subrelativistic laser intensities for the new scheme of laser fusion is evaluated on the background of the long years studies of nonlinear force driven plasma blocks and earlier interpenetration fusion reactions for providing the parameters for expected fusion gains much higher than the experiment of Norreys et al. for a fusion power scheme.     

UV protection filters by dielectric multilayer thin films on Glass BK-7 and Infrasil 301

The increasing use of Ultraviolet (UV) light in medicine, industrial environments, for cosmetic use, and even in consumer products necessitates that greater attention be paid to the potential hazards of this type of electromagnetic radiation. To avoid any adverse effects of exposure to this type of radiation, four suitable protection filters were produced to block three UV bands (UVA, UVB, and UVC). The design structure of the required dielectric multilayer filters was done by optical thin film technology using the absorbing property of UV radiation for the substrates and dielectric materials. The computer analyses of the multilayer filter formulas were prepared using Macleod Software for the production processes. The deposition technique was achieved on optical substrates (Glass BK-7 and Infrasil 301) by dielectric material combinations including Titanium dioxide (Ti₂O₃), Hafnium dioxide (HfO₂), and Lima (mixture of oxides SiO₂/Al₂O₃); deposition being achieved using an electron beam gun. The output results of the theoretical and experimental transmittance values for spectral band from 200 nm to 800 nm were discussed in four processes. To analyze the suitability for use in ‘real world’ applications, the test pieces were subjected to the durability tests (adhesion, abrasion resistance, and humidity) according to Military Standard MIL-C-675C and MIL-C-48497A.     

Influence of silicon on the microstructure and mechanical properties of Zr-Si-N composite films

A series of Zr-Si-N composite films with different Si contents were synthesized in an Ar and N₂ mixture atmosphere by the bi-target reactive magnetron sputtering method. These films’ composition, microstructure and mechanical properties were characterized by energy dispersive spectroscopy, X-ray diffraction, scanning electron microscopy, atomic force microscopy and nanoindentation. Experimental results revealed that after the addition of silicon, Si₃N₄ interfacial phase formed on the surface of ZrN grains and prevented them from growing up. Zr-Si-N composite films were strengthened at low Si content with the hardness and elastic modulus reaching their maximum values of 29.8 and 352 GPa at 6.2 at% Si, respectively. With a further increase of Si content, the crystalline Zr-Si-N films gradually transformed into amorphous, accompanied with a remarkable fall of films’ mechanical properties. This limited enhancement of mechanical properties in the Zr-Si-N films may be due to the low wettability of Si₃N₄ on the surface of ZrN grains.     

Deposition conditions in tailoring the morphology of highly porous reticular films prepared by electrostatic spray deposition (ESD) technique

Spongy-like reticular structure is a unique morphology fabricated by electrostatic spray deposition (ESD) technique. The effects of solvent, substrate temperature, precursor feeding rate, static electric field strength, and deposition time on tailoring the reticular structure were investigated. Scanning electron microscopy was used to observe the film morphology. MnO_x or LiMn₂O₄ were selected as the model materials. It is found that in addition to the conventional solvent butyl carbitol, other kinds of solvents such as ethylene glycol and propylene glycol can also be used to obtain reticular films at a suitable substrate temperature. Porous films with a low cross-linking degree pore structure can be prepared by increasing precursor feeding rate or decreasing substrate temperature. Increasing the deposition time or the electric field strength helps to obtain reticular films with more homogeneous pore size distribution. In addition, the addition of a high boiling-point solvent in mixed alcohol solvent results in the increase of proper substrate temperature. It is concluded that the fluidity of the spray droplets on the surface of a hot substrate is an important factor to form a reticular film.     

离化团簇束法制备c轴取向的ZnO薄膜

为了探索低温可调控ZnO薄膜沉积技术,提出了一种新的ZnO薄膜制备方法,即离化团簇束（ICB）法,并自行设计研制了应用该方法制备ZnO薄膜的专门装置.采用超音速喷嘴获得高速锌原子团簇束,用Hall等离子体源产生氧离子束离化锌原子团簇,获得了较高的离化率.在沉积过程中,可以通过调节衬底偏压、氩氧比、衬底加热温度等参数,来控制成膜的质量;应用这个装置成功地在硅衬底上制备的ZnO薄膜,经XRD和EDS检测,薄膜的c轴取向一致,Zn、O原子百分比接近于1：1,成膜质量好.     

衍射辐射及其在电子束诊断中的应用

衍射辐射是由于运动的带电粒子遇到随空间变化的电介质而由感应电流产生的一种辐射. 衍射辐射由于其非阻拦性, 多参数性, 可在线性, 非常适合下一代对撞机和第四代光源的电子束诊断. 简要介绍了其物理机制, 系统的讨论了其在电子束诊断中的应用.     

Phosphonate electrochemical recognition by molecularly imprinted deposited film

In this paper, thin films of titanium oxide imprinted with O,O-dimethyl-(2,4-dichlorophenoxyacetoxyl)(3′-nitrobenyl) methinephosphonate (Phi-NO₂) were prepared via liquid phase deposition (LPD) method on a glassy carbon electrode. The imprinted molecular in the films was removed by treatment with immersion in CH₂Cl₂. X-ray diffraction (XRD) and electrochemical methods were introduced to show the evidence of the molecular imprinting phenomenon. It was also found that the recognition ability of the sensor depended on the substituents associated with tridimensional structures of the nitro-compounds. Under the optimized condition, the sensor showed better sensitivity, selectivity and reproducibility to the imprinted molecule and the linear relationship between the current and the concentration of analyte in the range of 0.1-50 μM was obtained. LPD proved to be a powerful method for imprinting titanium oxide thin sense films.     

高能闪光照相对电子束参数的要求

对高能闪光机光源性能用Monte-Carlo方法模拟研究发现：并非击靶电子束半径越小、发射度越低, 闪光机的照相性能就会越好. 研究结果表明：为了使闪光照相图像视面上照射量分布比较均匀, 对束半径与电子束归一发射度有一个联合限制, 对于20MeV闪光机, 如果击靶电子束有效半径是0.12cm, 那么仅当束归一发射度≥550cm.mrad时,在2°内的照射量不均匀性才小于5%.