Effect of relativistic elliptical beam modulation on excitation of surface plasma waves in a magnetized dusty plasma column with elliptical cross section

Abstract

The excitation of surface plasma waves due to the interaction of an elliptical relativistic density modulated electron beam with the magnetized dusty plasma column with elliptical cross-section has been studied. The dispersion relation of surface plasma waves has been retrieved from the derived dispersion relation by considering that the beam is absent and there is no dust in the plasma elliptical cylinder. It is shown that the Cherenkov and fast cyclotron interactions appear between the beam and eigen-modes of plasma column. The growth rate of the instability increases with the beam density and modulation index as one-third power of the beam density in Cherenkov interaction and is proportional to the square root of beam density in fast cyclotron interaction. The numerical results and graphs are presented, too.     

Der Einsatz von Sorbentien räumlich-globulrer Struktur zur Abtrennung radioaktiver Verunreinigungen aus Wasser

Abstract

Possibilities of using a new generation of sorbents have been investigated. Polymers of spatial-globular (spherulitic) structure (RGS polymers) have been tested to separate Cs, Sr and rare earth elements – which can also be radioactive contaminants – from different waters.

RGS polymers are both, solids and highly-disperse systems being extremely permeable to fluids and gases with low pressure decline. They were currently used to clean industrial waste-water.

It is shown that these polymers can be used successfully to separate radionuclides. Polymers RGS-81 and RGS-112 have high distribution coefficients for CS, Sr, Sc, the lanthanide series and Hf in weakly acid solutions. In HF solutions, Sc and Hf can be separated from Cs, Sr and the lanthanides.     

并苯纳米环[6]CA及其衍生物的电子结构和光物理性质的密度泛函理论研究

采用密度泛函理论PBE0方法在6-31G(d, p) 基组水平上对比研究并六苯纳米环[6]CA及BN取代纳米环[6]CA-BN的几何结构及电子性质. 同时探讨锂离子掺杂对不同体系的芳香性、前线分子轨道、电子吸收光谱及传输性质的影响. 通过电离势、亲合势及重组能的计算, 预测纳米环体系得失电子的能力及传输性能. 结果表明:[6]CA的能隙很小, BN取代后, 能隙明显增大; 锂离子掺杂到两种纳米环中, 在不明显改变前线分子轨道分布的前提下, 几乎同步降低了最高占据轨道、 最低未占据轨道能级, 锂离子掺杂使载流子传输性能得到很大改善; 电子吸收光谱拟合发现, BN取代使吸收光谱很大程度蓝移, 吸收强度明显减小; 而锂离子掺杂对光谱的强度及吸收范围没有明显影响. 关键词： 碳纳米环 硼氮纳米环 锂离子掺杂 密度泛函理论     

Self-Assembled Multistable Scattering Mode for Versatile Energy-Saving Smart Windows

Smart windows are crucial to dynamic control over light transmission to fulfill various demands in energy saving, privacy, and information display; however, most present technologies still perform a single function (often tint or haze adjustment) and require continuous electricity for operation. In this study, novel self-assembled ionic liquid crystals (ILCs) doped with negative cholesteric liquid crystals (CLCs) to offer electrically switchable and stable scattering-mode light modulators are presented. The novel smectic A phase based on the ILCs exhibits high solubility in the adopted nematics, enhancing the LC device's performance in several ways, including improved homogeneity, stable alignment quality, prolonged stability, and simplified fabrication. The LC device can potentially offer a dynamically rapid switching function between stable transparent (imperfect fingerprint textures) states and stable scattering (focal conic textures with small domains) states by using external stimuli and highly maintained multistable states for prolonged periods, even when the external stimuli are removed. The LC device also offers polarization-independent scattering and transparent-mode LC light modulators, low operating voltage, excellent contrast, and broad viewing angles. Its versatility and outstanding field-off stability make it ideal for various applications such as smart lighting, building climate control, energy-saving displays, and augmented reality (AR) glasses.     

均匀磁场下碳离子笔形束的剂量变化分析及位置修正方法

分析外加均匀磁场对于碳离子笔形束剂量分布的影响,并考虑修正这种影响,为磁共振成像引导碳离子放射治疗的临床应用提供指导。本文利用蒙特卡罗方法模拟计算了不同能量碳离子笔形束在不同强度磁场下的剂量分布情况,发现垂直于碳离子束入射方向的均匀磁场对于碳离子笔形束射程缩短的影响很小,磁场对碳离子束的主要影响是引起束流横向偏转,特别是碳离子束布拉格峰位置的横向侧移。横向侧移程度与碳离子束的能量和磁场强度相关,根据模拟结果,得到了一个计算碳离子束布拉格峰在磁场中相对横向偏转的方程,并提出一种校正外加磁场引起的碳离子束布拉格峰横移的角度修正方法。这些结果可用于指导磁共振图像引导碳离子放射治疗计划系统的研发。     

质子辐照硼硅酸盐玻璃盖片的物理效应分析

作为航天器电源系统的重要组成部分,太阳电池需要更高的转换效率和可靠性以及更长的使用寿命。通过在太阳电池表面覆盖抗辐照玻璃盖片,可以增强太阳电池对粒子辐射的防护,延长太阳电池的服役寿命,使航天器获得可靠的能源供应。硼硅酸盐玻璃就是一种理想的太阳电池玻璃盖片材料。采用蒙特卡罗方法,结合SRIM软件模拟研究质子辐照硼硅酸盐玻璃的损伤物理机理。基于粒子与物质相互作用的理论以及基本公式,通过分析不同入射能量的质子在硼硅酸盐玻璃中的阻止本领、电离能损、位移能损、空位的产生情况,对辐照损伤的物理机制进行研究。结果表明：能量为30～120 keV的质子辐照损伤主要发生在硼硅酸盐玻璃表面;质子沉积、空位分布等均为Bragg峰型分布;电离能损是能量损失的主要部分,随入射能量的增加而增大,导致电子的电离和激发;位移能损在玻璃内部随能量降低而增大,导致硼、氧和硅等空位缺陷的产生;电离效应和缺陷的产生是硼硅酸盐玻璃色心形成的重要原因。     

离子能量分析器测量特性的仿真研究

针对空间等离子体及其模拟环境、空间原子氧及其模拟环境对离子能谱测量的需要,利用仿真软件COMSOL,对离子能量分析器的低能离子测量特性进行了仿真研究。介绍了离子能量分析器的工作原理,对离子能谱测量过程进行了公式推导。通过对三种待选仪器设计方案进行离子透过率仿真分析,确定了一种较优的仪器设计方案。多种离子温度下的误差分析结果也表明,该设计方案能够较为准确地测量离子能量分布。分析了电场畸变、等离子鞘层、栅网对齐方式和离子温度对测量结果的影响,根据仿真结果对一些仿真实验现象做出了合理的解释。     

平顶飞秒激光经圆锥透镜在熔融石英中成丝及超连续辐射

实验研究了平顶飞秒激光经圆锥透镜后在熔融石英中的成丝及超连续辐射.与高斯飞秒激光的成丝对比发现,平顶飞秒激光可以获得在圆锥透镜焦深区域内强度分布更为均匀的等离子体细丝,这一特征更有利于飞秒激光在固体介质中进行微纳加工等领域的应用.并且,在不损伤熔融石英的条件下,平顶飞秒激光成丝可以获得更高能量、更高转换效率的超连续辐射,这是因为若产生光强相近的细丝,平顶飞秒激光所需的初始激光能量更高,此激光能量下产生的细丝长度更长、均匀性更好.     

双稳态结构中的1/2次谐波共振及其对隔振特性的影响

以典型的双稳态系统——屈曲梁结构为例,基于等效模型,结合解析、数值和实验手段,研究了双稳态结构中的1/2次谐波共振特性、演化过程、参数调节规律及其对隔振特性的影响.研究发现,当非线性刚度系数或激励幅值增加到一定程度时,系统会在一定带宽下产生显著的1/2次谐波共振;随着激励幅值增加,阻尼系统的1/2次谐波遵循“产生-增强-衰退-消失”的过程,该过程对峰值频率和峰值传递率有重要影响;适当提高非线性强度能有效改善双稳态结构隔振特性.针对双稳态屈曲梁结构开展的实验验证了1/2次谐波特性和隔振特性变化规律.     

基于四波混频过程和线性分束器产生四组份纠缠

多组份纠缠是量子信息处理的重要资源,它的产生通常涉及到许多复杂的线性和非线性过程.本文从理论上提出了一种利用两个独立的四波混频过程和线性分束器产生真正的四组份纠缠的方案,其中,线性分束器的作用是将两个独立的四波混频过程联系起来.首先应用部分转置正定判据研究了强度增益对四组份纠缠的影响,结果表明,在整个增益区域内都存在真正的四组份纠缠,并且随着强度增益的增加,纠缠也在增强.然后研究了线性分束器的透射率对四组份纠缠的影响,发现只要线性分束器的透射率不为0或1,该系统也可以产生真正的四组份纠缠.最后,通过研究该系统可能存在的三组份纠缠和两组份纠缠来揭示该系统的纠缠结构.本文理论结果为实验上利用原子系综四波混频过程产生真正的四组份纠缠提供了可靠的方案.