碳酸铯修饰Al作为反射阴极的倒置顶发射OLED器件

以Cs₂CO₃修饰的Al电极作为反射阴极制备了高效倒置顶发射结构有机电致发光器件(ITOLED)。以八羟基喹啉铝(Alq₃)作为发光层、MoO₃修饰的Ag为半透明阳极时,器件的开启电压为3.6 V,发光效率和功率效率分别达到9.8 cd/A和3.4 lm/W。研究结果表明,Al/Cs₂CO₃为反射阴极的器件性能明显高于使用Mg:Ag(4.2 V,8.6 cd/A,2.85 lm/W)和Al(5 V,5.5 cd/A,1.57 lm/W)作为反射阴极的倒置顶发射OLED器件。单电子器件研究结果证明,以Cs₂CO₃修饰的Al电极功函数明显低于Mg:Ag和Al电极,具有更好的电子注入效果。因此,除去微腔效应外,Al/Cs₂CO₃为反射电极的ITOLED器件性能的提高主要归因于Al/Cs₂CO₃阴极的有效电子注入。     

C语言在密立根实验数据处理中的应用

用密立根油滴仪测油滴的电荷,求基本电量,及验证电荷量子性的实验是大学物理实验的经典实验。实验采用倒过来验证法,数据多,计算量较大,本文探讨使用C语言编程来处理实验数据。     

低能离子束诱导Ag表面纳米金字塔微结构

利用离子束溅射诱导实验方法,在单晶Si(100)基底上辅助沉积银膜,研究了低能Ar+离子束30°入射时,不同离子束能量和束流密度以及基底温度对Ag纳米结构的影响.结果表明:在较低基底温度下(32~100℃)辅助沉积银膜,膜层表面会呈现排列紧密、晶粒尺寸一致的金字塔状纳米结构.当温度升高时(32~200℃),纳米微结构横向尺寸λc迅速增加,而粗糙度先减小(32~100℃)后迅速增大(100~200℃);当离子束能量1 400eV、束流密度15~45μA/cm2时,在相同温度下,随着离子束束流密度的增大,纳米晶粒横向尺寸基本不变,粗糙度略有增加;当离子束流密度为15μA/cm2、能量1 000~1 800eV时,在相同温度下,随着离子束能量的增加,银纳米结构尺寸增加,而表面粗糙度先增加,然后缓慢减小.自组织纳米结构的转变是溅射粗糙化和表面驰豫机制相互作用的结果.     

改进的Faster-RCNN算法在聚乙烯管接头内部缺陷检测中的应用

超声相控阵技术是目前聚乙烯管道热熔接头内部缺陷检测的一种主流方法。提出了基于注意力机制的改进Faster-RCNN目标检测网络用于超声相控阵D扫图聚乙烯管接头内部缺陷检测。针对聚乙烯管道热熔接头内部超声相控阵D扫图小缺陷较多、特征信息容易丢失的问题,将残差网络(ResNet50)与特征金字塔网络(FPN)相结合作为骨干网络,并引入卷积注意力模块(CBAM)自适应细化特征。将SSD网络框架和Faster-RCNN网络框架用于模型训练和测试,使用VGG16、ResNet50、ResNet50+FPN、ACBM+ResNet50+FPN作为骨干网络依次对超声相控阵聚乙烯管道热熔对接接头内部缺陷样本进行训练对比。结果表明,改进的Faster-RCNN网络模型在聚乙烯管接头内部缺陷检测和分类方面有明显改进,对小缺陷的检测性能有了显著的提高。     

Stability of AgIII towards Halides in Organosilver(III) Complexes

The involvement of silver in two-electron Ag^I/Ag^III processes is currently emerging. However, the range of stability of the required and uncommon Ag^III species is virtually unknown. Here, the stability of Ag^III towards the whole set of halide ligands in the organosilver(III) complex frame [(CF₃)₃AgX]⁻ (X=F, Cl, Br, I, At) is theoretically analyzed. The results obtained depend on a single factor: the nature of X. Even the softest and least electronegative halides (I and At) are found to form reasonably stable Ag^III−X bonds. Our estimates were confirmed by experiment. The whole series of nonradiative halide complexes [PPh₄][(CF₃)₃AgX] (X=F, Cl, Br, I) has been experimentally prepared and all its constituents have been isolated in pure form. The pseudohalides [PPh₄][(CF₃)₃AgCN] and [PPh₄][(CF₃)₃Ag(N₃)] have also been isolated, the latter being the first silver(III) azido complex. Except for the iodo compound, all the crystal and molecular structures have been established by single-crystal X-ray diffraction methods. The decomposition paths of the [(CF₃)₃AgX]⁻ entities at the unimolecular level have been examined in the gas phase by multistage mass spectrometry (MSⁿ). The experimental detection of the two series of mixed complexes [CF₃AgX]⁻ and [FAgX]⁻ arising from the corresponding parent species [(CF₃)₃AgX]⁻ demonstrate that the Ag−X bond is particularly robust. Our experimental observations are rationalized with the aid of theoretical methods. Smooth variation with the electronegativity of X is also observed in the thermolyses of bulk samples. The thermal stability in the solid state gradually decreases from X=F (145 °C, dec.) to X=I (78 °C, dec.) The experimentally established compatibility of Ag^III with the heaviest halides is of particular relevance to silver-mediated or silver-catalyzed processes.     

颗粒内部的碘离子对碘溴化银微晶照相性能的影响

本文研究了用连体四角锥碘化银为晶核制备类似于四面体碘溴化银微晶和用六方角锥碘化银为晶核制备片状碘溴化银微晶的方法,并对两种不同微晶的结构,形态和性能进行了比较和分析.     

Comparison of two types of vertically aligned ZnO NRs for highly efficient polymer solar cells

Vertically aligned ZnO nanorods (NR) are prepared by two different syntheses methods and applied on polymer solar cells (PSCs). The ZnO electrodes work as the electron transport layer with the P3HT:PCBM blend acting as the active material. Several organic blend solution conditions are optimized: concentration, solvent, and deposition speed. The effect of different NR electrode morphologies is analyzed on the solar cell performance and characterized by current–voltage curves and IPCE analyses. The photovoltaic performance of the solar cells was observed to be influenced by many factors, among them infiltration of the organic P3HT:PCBM blend within the ZnO NR layer. The infiltration of the active layer was monitored by cross section SEM and energy dispersive X-ray spectroscopy analyses. Our results show that higher power conversion efficiencies are achieved when shorter NRs lengths are applied. The best power conversion efficiency obtained was 2.0% for a 400 nm ZnO NR electrode. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

在四氯合锌离子诱导下反式六元瓜环与碱金属离子构筑的配位超分子自组装体

在盐酸介质中,通过四氯合锌离子诱导,碱金属离子能与反式六元瓜环端口羰基氧原子直接配位构筑形成超分子自组装体。单晶结构表明在HCl介质中,四氯合锌离子形成"蜂巢结构",而且在[ZnCl₄]^2-诱导作用下,碱金属离子和反式六元瓜环端口羰基氧直接配位形成一维超分子自组装体而填充在"蜂巢结构"中。     

复合材料柔软性对倒金字塔微结构阵列传感器性能的影响

采用模压成型方法制备了2种柔软性不同的热塑性聚氨酯/短切碳纤维/碳纳米管(TPU/SCF-CNT)复合材料复制物, 其表面上具有倒金字塔微结构阵列, 内部有SCF与CNT共同构成的导电通路. 将复合材料复制物和相应的复合材料平整片封装成柔性传感器. 结果表明, 压力作用下传感器内复制物和平整片之间的接触电阻因倒金字塔底棱的形变而显著降低. 对使用柔软性较高的复合材料封装的传感器, 虽然其相对迟滞稍大, 但压力作用下倒金字塔底棱形变量较大, 且复制物和平整片内导电通路增加量较大, 因此其在0~2.5 kPa的线性区内具有较高的灵敏度(0.32 kPa^?1). 制备的2种传感器均具有快速响应特性, 且能在500 s(约1580次)的循环压缩/释放测试(峰值压力约3 kPa)中保持较稳定的电阻响应. 研究表明, 利用模压成型的表面倒金字塔结构复合材料复制物封装成的柔性压力传感器具有良好的传感性能.     

Fe_3(CO)_9(μ_3-S)_2的P(SR)Cl_2和P(SR′)_3取代物的合成和结构研究

用P(SR)Cl_2和P(SR′)_3作n-酸配体,分别与Fe_3(CO)_9(μ_3-S)_2进行取代反应,得到6种新的一取代产物Fe_3(CO)_8(μ_3-S)_2L和3种新的二取代产物Fe_3(CO)_7(μ_3-S)_2L_2,并对它们进行了IR、~1H NMR和MS表征,测定了其中一种取代物Fe_3(CO)_8(μ_3-S)_2[P(SC_6H_5)Cl_2]的分子和晶体结构。