基于分子参数的药物小肠吸收预测模型

选择100个化合物作为数据集,随机选取其中80个为训练集,其他分子为验证集,并为每个化合物分子计算了30个参数.通过采用五种不同多元线性回归分析方法对其训练模拟,建立了数学模型,并用验证集检验了所建模型的预测能力.结果发现向后筛选法为最优小肠吸收建模方法.由该法所建模型的统计结果良好(R2>0.80),应用于验证集时也表现出较强预测能力.该模型确定了对小肠吸收影响较大的分子参数,有助于指导进一步的新药筛选和开发.     

普鲁士兰修饰碳黑微电极同时微分伏安法测定多巴胺和抗坏血酸

将含有1.0%普鲁士蓝的碳黑与固体石蜡按2.5∶1(质量比)混合后装入φ0.2mm的石英毛细管中,在其上端插入一铂丝并抛光后即制成普鲁士蓝修饰碳黑微电极.对多巴胺(DA)及抗坏血酸(VC)在此电极上的电化学行为及应用此电极测定两组分的最佳条件进行了研究,在定量测定中采用二次微分线性扫描伏安法.在最佳条件下,DA与VC的峰电流(i″p)分别与各自的浓度保持如下线性关系DA为4.0×10-6～8.0×10-4mol·L-1,VC为6.0×10-5～1.0×10-3mol·L-1;检出限(3σ)依次为2.0×10-6mol·L-1及1.0×10-5mol·L-1.应用此方法分析了3种含DA及VC的混合溶液,测得结果的相对标准偏差(n=8)依次小于2.0%及3.0%,回收率范围依次为96.5%～101.0%及95.0%～102.5%.     

Excess heat capacities of ternary systems containing chlorobenzene or chloronaphthalene

Densities and heat capacities of ternary systems were determined at 25°C. The ternary systems consisted of: a polar molecule (component 1) + a mixture of alkanes (components 2 and 3) of different sizes and shapes. Five such systems were studied: chlorobenzene + cyclohexane + n-heptane; chlrobenzene + cyclohexane + n-hexadecane; chlorobenze + cyclohexane + isooctane; chlorobenzene + isooctane + n-heptane; 1-chloronaphthalene + isooctane + n-heptane. The excess molar volumes and heat capacities were obtained along dilution lines by component 1 (chlorobenzene or 1-chloronaphthalene) of mixtures of components 2 and 3 (at fixed component 2 mole fraction X₂). Unexpectedly the excess heat capacities C _p1(23) ^E of the pseudo-binaries {1+(2+3)} do not always fall between the two (limiting) curves of C _p12 ^E and C _p13 ^E corresponding to the two binaries {1+2} and {1+3}. Instead, especially for {chlorobenzene + cyclohexane + an n-alkane} the C _p1(23) ^E curves are displaced toward less negative values, even beyond the limiting values corresponding to the binaries. This correlates semi-quantitatively with the negative C _p23 ^E of the binary {2+3}.Presented at the Symposium, 76^th CSC Congress, Sherbrooke, Quebec, May 30-June 3, 1993, honoring Professor Donald Patterson on the occasion of his 65^th birthday.     

Studies on the thermotropic liquid crystalline polycarbonates. III. Synthesis and properties of fully aromatic liquid crystalline polycarbonates

Four series of fully aromatic thermotropic liquid crystalline polycarbonates were prepared by melt polycondensation from various novel phenylene diphenyl dicarbonates with monomers, such as hydroquinone, methylhydroquinone, chlorohydroquinone, resorcinol, bisphenol A, 4,4′-dihydroxydiphenylsulfone, or phenylhydroquinone, respectively. The thermotropic liquid crystalline properties were studied by polarizing microscope with a heating stage, differential scanning calorimeter (DSC), and wide-angle x-ray diffraction (WAXD). It was found that the nonlinearity of the carbonate group was compensated by resorcinol (1,3-phenylene unit), a bent shape unit. Nematic melts were found for the resulting polycarbonates. © 1993 John Wiley & Sons, Inc.     

安力农的极谱测定及其电化学行为

在ｐＨ５．６，０．１５ｍｏｌ／Ｌ磷酸盐缓冲溶液（ＰＢＳ）中，得到了安力农的灵敏极谱吸附波，波的二阶导波高在２×１０＾－８～８×１０＾－６ｍｏｌ／Ｌ范围内与安力农的浓度成直线关系，检测下限为１×１０＾－８ｍｏｌ／Ｌ，测定出电极过程的电子传递系数ａ＝０．４３，表面电极反尖速率常数ｋｓ＝３．３ｓ＾－１，安力农在汞电极上的吸附遵从Ｌａｎｇｍｕｉｒ等温式，测得其吸附系数β＝８．１×１０＾５。     

RELATIONSHIPS BETWEEN X—H STRETCHING OVERTONE FREQUENCIES AND BOND LENGTHS/BOND ANGLES

A relationship between the X-H (X = N, O, C, and so on) equilibrium bond length in a Morse oscillator and the X-H stretching overtone frequency shifts is obtained theoretically. We use the equation to discuss the empirical linear relationships that have been proposed for heterocyclics, alkanes and fluorinated benzenes. On the other hand, a unified relationship between the X-H bond angles and the experimental quantities (ω(?) and the coupling strength λ) is also presented for XH2, XH, and XH4 molecules or molecular fragments. Calculations of X-H bond angles for a number of molecules show that the results from our equations are in excellent agreement with the experimental values. Also we can extract the information of relative magnitude of bond coupling force field.     

Analysis of the contribution of skeletal vibrations to the heat capacity of linear macromolecules in the solid state

Automatic computer programs are developed to calculate one- two-, and three-dimensional Debye functions. Prior tables of these functions are critically reviewed. Also, strategies are derived to calculate Debye temperatures from heat capacities. Both, simple three-dimensional Debye analyses and Tarasov analyses were carried out on 35 linear macromolecules. The experimental heat capacities for these analyses were collected in the ATHAS data bank. It is shown that the skeletal heat capacity of linear macromolecules is often best represented by only two vibrations per chain atom. For most of the all-carbon chain macromolecules the intramolecular skeletal heat capacity can be given by C_vs=D₁[520 (28/MW)^1/2] whereMW is the molecular mass andD ₁ represents the one-dimensional Debye function. Polyoxides show a higher intramolecular theta temperature, but a lower intermolecular theta temperature. Double bonds and phenylene groups in the chain increase the intramolecular theta temperature.Dedicated to Prof. Dr. F. H. Müller.On leave from the Lumumba Peoples' Friendship University, Moscow, USSR.     

Effect of thermal history on crystallization and melting behaviour of lldpe

In this paper two LLDPE samples with their own structural parameters were studied by means of DSC. Experimental results show that DSC was good for revealing slight structural difference between these two samples. Furthermore, the effect of thermal history on crystallization and melting behaviour of LLDPE was observed clearly through varying conditions of thermal treatment.

---

Zusammenfassung Mittels DSC werden zwei LLDPE-Proben mit ihren eigenen Strukturparametern untersucht. Die Versuchsergebnisse zeigen, da\ sich DSC gut eignet, um gering fügige Unterschiede dieser zwei Proben nachzuweisen. Weiterhin wurde unter verschiedenen Bedingungen der Einflu\ der thermischen Vorgeschichte auf das Kristallisations-und Schmelzverhalten von LLDPE untersucht.

     

On the regulator problem for linear degenerate control systems

In this paper, we study the finite-time regulator problem for linear, autonomous, degenerate systems, i.e., systems described by the differential equation with det(K)=0. Two investigations of the regulator problem are presented, which depend on the quadratic cost associated with the differential equation.This work was performed under the auspices of the National Research Council of Italy, Gruppo Nazionale per l'Analisi Funzionale e le Sue Applicazioni, Rome, Italy.