Quantitative analysis of docetaxel in human plasma using liquid chromatography coupled with tandem mass spectrometry

An assay for the quantitative determination of docetaxel in human plasma is described. Docetaxel was extracted from the matrix using liquid-liquid extraction with ter-butylmethylether, followed by high-performance liquid chromatographic analysis using an alkaline eluent. Paclitaxel was used as internal standard. Positive ionization electrospray tandem mass spectrometry was performed for selective and sensitive detection. The method was validated according to the FDA guidelines on bioanalytical method validation. The validated range for docetaxel was from 0.25--1000 ng/mL using 200 microL plasma aliquots. The method requires only a limited volume (200 microL) of human plasma and the method can be applied in studies requiring a low lower limit of quantitation of 0.25 ng/mL. The assay was applied successfully in several clinical and pharmacological studies with docetaxel.     

用于流化床燃烧脱硫的石灰石的反应活性评价和测试研究

对用于燃煤流化床燃烧脱硫的脱硫剂石灰石的反应活性进行了研究，提出了易于进行数学处理的石灰石硫盐化模型，得出了评价石灰石反应活性的两个指标－最大转化率和反应速率常数。研究方法除采用了传统的热天平法和鼓泡流化床外，还根据循环流化床燃烧技术的特点，发展了提出了湍流床法和石英棉法，并进行了不同试验条件下的实验研究，对不同反应活性温度技术进行了试验比较。     

CALCULATING THE MOLECULAR INTERNAL ROTATING STERIC FACTOR OF POLYMERS BY THE RADIATION CROSSLINKING METHOD

In this paper, calculating the molecular internal rotating steric factor of polymers by the radiation crosslinking method is studied and a relationship between the molecular internal rotating steric factor (σ) and crosslinking parameter βis established~([1]) by taking account of the effect of polymer chain flexibility on βvalue, σvalue of polymer obtained by this method is in agreement with that given with other method.     

HYPERFINITE TRANSVERSAL THEORY. II

We continue the investigation of validity of Hall's theorem in the case of the Loeb space of an internal, uniformly distributed, hyperfinite measure space initiated in1992 by the author. Some new classes of graphs are introduced for which the measure theoretic version of Hall's theorem still holds.

     

Removal of H2S from Exhaust Gas by Use of Alkaline Activated Carbon

The purpose of this research was to select an activated carbon and alkaline solution blend that generated the best H₂S adsorption on alkaline-activated carbon. RB₂ (activated carbon) impregnated with NaOH solution was shown to have the optimum H₂S removal efficiency. The optimum NaOH concentration was 50 mg per gram of carbon. H₂S adsorption via RB₂-NaOH₅₀ was five times that of a corresponding fresh-activated carbon. The adsorption equivalent of H₂S is nearly 1 (mol-H₂S/mol-AOH), therefore, H₂S + AOH AHS + H₂O was the major reaction. The H₂S adsorption isotherm corresponded to the Freundlich isotherm.     

旋转填充床的流体力学特性与传递过程的理论研究进展

旋转填充床(RPB)是一种高效的强化传递过程设备，亦是一种高效的混合与多相反应设备，在化工、材料、冶金、能源、环保等领域有着广泛的应用前景。本文概要地介绍了近年来对该类装置的流体力学特性和传递过程的理论研究进展。     

Axial dispersion in a liquid fluidized bed of particles akin to immobilized enzymes

The axial dispersion of a liquid fluidized bed of controlled pore silica (CPS) particles has been determined by the pulse tracer method. The CPS used was the same as for enzyme immobilization, having an average diameter of 0.436 mm and mean pore size of 37.5 nm. The fluidization liquid is α-amylase liquefied manioc starch, 30% w/v, 45°C pH=4.5. Nominal bed porosities tested were 0.7 and 0.8. The results show that the axial dispersion coefficient increases with greater superficial liquid velocities. Various available correlations tested disagree with each other to a large extent and are unable to represent collected experimental data.     

垃圾在流化床中焚烧NO排放特性研究

在Ф150 mm流化床上，研究了六类典型组分垃圾NO转化率与床温和过量空气系数(excess air简称EA)的关系。研究发现，纸渣与木块NO转化率最高，橡胶与塑料最低;织物、纸张、厨余、木块、塑料NO均具有中温生成特性，一般在800 ℃～850 ℃时即接近最大值，之后温度升高对NO的生成影响不大;橡胶与无烟煤由于含N化合物结构稳定，其NO转化率随床温升高而增大;由于挥发分析出的相互影响，较低的火焰温度，混合垃圾NO转化率一般低于单组分垃圾的线性叠加;少量水分不会对垃圾NO转化率造成很大影响，相反还会促进NO的转化，但过量水分会抑制NO的生成。     

低温低内应力化学镀镍工艺的研究

化学镀广泛应用于非金属的电镀、电铸前的施加导电层。化学镀沉积层质量与其在零件上的附着力有着密切的关系 ,重视对化学镀沉积层内应力的研究 ,开发一个低温、低内应力的化学镀镍工艺 ,对于化学镀沉积层的推广应用有着十分重要的意义。本文采用正交实验方法对低温、低内应力化学镀镍工艺进行了系统研究 ,开发出了一个低温、低内应力的化学镀镍工艺。在实验过程中发现沉积层内应力同其在零件上的结合力具有密切关系并对其进行了初步探讨。1　实验方法1 1　正交实验根据探索性实验结果分析 ,影响化学镀镍层内应力σ和沉积层速率ｒ的主要因…     

Impedance study of Ni–Co electro-deposition on Fe powder particles in fluidised bed systems

The electrochemical impedance method was applied during the electrochemical deposition of a binary Ni–Co coating on iron powder in a fluidised bed electrode system. The influence of the suspension density on the charge transfer in the course of the electro-deposition process was studied. At a potential of −900 mV (vs. Ag/AgCl/3 M KCl), when the binary Ni–Co layer was formed, the impedance data were characterised by two semicircles with the semicircle at high frequencies being larger in magnitude. A contribution of the diffusion process to the overall current was observed. The optimal suspension density for the charge transfer in the bed was 10×10⁻³–15×10⁻³ (i.e., 4–6 g of iron powder in 50 ml of electrolyte). The most probable mechanism of the charge transfer for the studied concentrations of powder particles is the convective mechanism. The iron particles dispersed in the electrolyte were considered to act as either a depolariser or an additional working electrode depending on the applied electrode potential and on the suspension density.