Fractionation and purification of antioxidant peptides from Chinese sturgeon (Acipenser sinensis) protein hydrolysates prepared using papain and alcalase 2.4L

Protein hydrolysates have the potential to be natural and safer sources of bioactive peptides. In this study, two proteases were used to hydrolyze Chinese sturgeon (Acipenser sinensis) protein, and the hydrolysates were then purified to yield antioxidant peptides. The degree of hydrolysis of 23.56 % and 18.14 % was obtained using papain and alcalase 2.4L, respectivly, and hydrolysates had 96.80 % and 87.24 % total amino acid content, respectivly. The papain hydrolysate (PH) and alcalase 2.4L hydrolysate (AH) showed good antioxidant activity against DPPH^? (IC₅₀ of 3.64 and 3.15 mg/mL) and ABTS^?+ (IC₅₀ of 1.92 and 1.58 mg/mL), respectively. The low-molecular-weight (<1000 Da) fraction of both hydrolysates demonstrated the highest antiradical activity (IC₅₀ of 2.59 and 2.31 mg/mL, DPPH) and (IC₅₀ of 1.54 and 1.36 mg/mL, ABTS), respectively. Nine peptides were separated from both hydrolysates using reverse phase high performance liquid chromatography (RP-HPLC). The IC₅₀ for ABTS^?+ scavenging activity of peptide P5 with valine, glycine and asparagine (MW of 282.13 Da) from PH, and peptide P3 with histidine, glycine and alanine (MW of 302.74 Da) from AH was 0.89 and 0.72 mg/mL, respectively. The fractions and purified peptides obtained from Chinese sturgeon hydrolysates could be utilized as natural antioxidant substitutes in pharmaceuticals and food products.     

Influence of silica gel pretreatment and bonding technique on PAH selectivity of octadecyl bonded phases

Summary The effect of silica gel pretreatment and of different bonding techniques, on the chromatographic properties of octadecyl bonded phases is described. The experiments show that a monomeric octadecyl bonded phase, prepared from silica gel that has not been treated before bonding, has a poor selectivity towards polycyclic aromatic hydrocarbons (PAHs) and shows high adsorption of basic components. Silica gel treatment before the bonding of the monofunctional silane does not give a substantial improvement. Polymeric phases on the other hand show a much better PAH selectivity and a lower adsorptivity towards basic components. Further improvement can be achieved with the polymeric modification if silica gel treatment is carried out before bonding.     

Analysis of organic compounds in environmental samples by headspace solid phase microextraction

The analysis of samples contaminated by organic compounds is an important aspect of environmental monitoring. Because of the complex nature of these samples, isolating target organic compounds from their matrices is a major challenge. A new isolation technique, solid phase microextraction, or SPME, has recently been developed in our laboratory. This technique combines the extraction and concentration processes into one step; a fused silica fiber coated with a polymer is used to extract analytes and transfer them into a GC injector for thermal desorption and analysis. It is simple, rapid, inexpensive, completely solvent-free, and easily automated. To minimize matrix interferences in environmental samples, SPME can be used to extract analytes from the headspace above the sample. The combination of headspace sampling with SPME separates volatile and semi-volatile analytes from non-volatile compounds, thus greatly reducing the interferences from non-target compounds. This paper reports the use of headspace SPME to isolate volatile organic compounds from various matrices such as water, sand, clay, and sludge. By use of the technique, benzene, toluene, ethyl-benzene, and xylene isomers (commonly known as BTEX), and volatile chlorinated compounds can be efficiently isolated from various matrices with good precision and low limits of detection. This study has found that the sensitivity of the method can be greatly improved by the addition of salt to water samples, water to soil samples, or by heating. Headspace SPME can also be used to sample semi-volatile compounds, such as PAHs, from complex matrices.     

Distinguishable RGE Running Effects Between Dirac Neutrinos and Majorana Neutrinos with Vanishing Majorana CP-Violating Phases

In a novel parametrization of neutrino mixing and in the approximation of т-lepton dominance, we show that the one-loop renormalization-group equations (RGEs) of Dirac neutrinos are different from those of Majorana neutrinos even if two Majorana CP-violating phases vanish. As the latter can keep vanishing from the electroweak scale to the typical seesaw scale, it makes sense to distinguish between the RGE running effects of neutrino mixing parameters in Dirac and Majorana cases. The differences are found to be quite large in the minimal supersymmetric standard model with sizable tanβ, provided the masses of three neutrinos are nearly degenerate or have an inverted hierarchy.     

Phase Transitions Induced by Top-Priority of Randomization

We study the characteristics of phase transition to take the top-priority of randomization in the rules of NaSch model (i.e.noise-first model) into account via computing the relaxation time and the order parameter.The scaling exponents of the relaxation time and the scaling relation of order parameter,respectively,axe obtained.     

Pseudo-Binary Phase Diagram of LiNH2-MH (M = Na,K) Eutectic Mixture

The hunt for a cleaner energy carrier leads us to consider a source that produces no toxic byproducts. One of the targeted alternatives in this approach is hydrogen energy, which, unfortunately, suffers from a lack of efficient storage media. Solid-state hydrogen absorption systems, such as lithium amide (LiNH₂) systems, may store up to 6.5 weight percent hydrogen. However, the temperature of hydrogenation and dehydrogenation is too high for practical use. Various molar ratios of LiNH₂ with sodium hydride (NaH) and potassium hydride (KH) have been explored in this paper. The temperature of hydrogenation for LiNH₂ combined with KH and NaH was found to be substantially lower than the temperature of individual LiNH₂. This lower temperature operation of both LiNH₂-NaH and LiNH₂-KH systems was investigated in depth, and the eutectic melting phenomenon was observed. Systematic thermal studies of this amide-hydride system in different compositions were carried out, which enabled the plotting of a pseudo-binary phase diagram. The occurrence of eutectic interaction increased atomic mobility, which resulted in the kinetic modification followed by an increase in the reactivity of two materials. For these eutectic compositions, i.e., 0.15LiNH₂-0.85NaH and 0.25LiNH₂-0.75KH, the lowest melting temperature was found to be 307 °C and 235 °C, respectively. Morphological studies were used to investigate and present the detailed mechanism linked with this phenomenon.     

Insight into the Inclusion Complexation of Fluconazole with Sulfonatocalix[4]naphthalene in Aqueous Solution,Solid-State,and Its Antimycotic Activity

The study aims to assess the interaction between fluconazole and sulfonatocalix[4]naphthalene towards enhancing its dissolution performance and antimycotic activity. A solubility study was carried out at different pH conditions, and the results revealed the formation of a 1:1 molar ratio fluconazole-sulfonatocalix[4]naphthalene inclusion complex with an A_L type phase solubility diagrams. The solid powder systems of fluconazole-sulfonatocalix[4]naphthalene were prepared using kneaded and co-evaporation techniques and physical mixtures. DCS, PXRD, TGA-DTG, FT-IR, and in vitro dissolution performance characterize the prepared systems. According to physicochemical characterization, the co-evaporation approach produces an amorphous inclusion complex of the drug inside the cavity of sulfonatocalix[4]naphthalene. The co-evaporate product significantly increased the drug dissolution rate up to 93 ± 1.77% within 10 min, unlike other prepared solid powders. The antimycotic activity showed an increase substantially (p ≤ 0.05, t-test) antimycotic activity of fluconazole co-evaporate mixture with sulfonatocalix[4]naphthalene compared with fluconazole alone against clinical strains of Candida albicans and Candida glabrata. In conclusion, sulfonatocalix[4]naphthalene could be considered an efficient complexing agent for fluconazole to enhance its aqueous solubility, dissolution performance, and antimycotic activity.     

Noether-Mei Symmetry of Mechanical System in Phase Space

In this paper, a new kind of symmetry and its conserved quantities of a mechanical system in phase space are studied. The definition of this new symmetry, i.e., a Noether-Mei symmetry, is presented, and the criterion of this symmetry is also given. The Noether conserved quantity and the Mei conserved quantity deduced from the Noether-Mei symmetry of the system are obtained. Finally, two examples are given to illustrate the application of the results.     

钾明矾蓄热性能的研究与改善

钾明矾(KAl(SO4)2·12H2O)有较高的潜热和良好的导热性(熔化热232.4kJ/kg,导热系数为0.55W/m·K),熔点为91℃,是中低温相变材料中较有开发价值的一种.但是它的过冷度高达19.8℃,并且由于相变过程伴随着结晶水的蒸发使无机盐的使用寿命大大降低.本文通过冷指法及添加成核剂的方法对硫酸铝钾的过冷现象进行了研究,结果表明成核剂NiSO4·6H2O、MgCl2·6H2O能较好的改善过冷现象,当MgCl2·6H2O的添加量为2;时可使过冷度降为零,且能保持钾明矾的相变温度而不使其降低.利用MgCl2·6H2O具有很强的吸湿性,可以补充相变过程中损失的水分,使相变材料的使用寿命大大提高.     

Determination of Acetonitrile Volume Fraction in Mobile Phase by HPLC

This paper reports the development and validation of an assay for the determination of acetonitrile in the recycled mobile phase using high performance liquid chromatography（HPLC）. The method is based on that the retention in reversed-phase liquid chromatography increases with decreasing concentration of organic phase in the mobile phase. The natural logarithm of the capacity ratio for a given solute is linearly related to the volume fraction of the organic modifier in the mobile phase. For dimethylphthalate and diethylphthalate, the linearity range is 30%--60%, and for biphenyl and terphenyl, the range is 60%--95%. Precision values（RSD） were both 〈1% and the accuracy（RE） was in the range of ±1%. The assay was successfully applied to the determination of acetonitrile concentration of recycled mobile phase after the distillation of the column eluent in our laboratory.