Sulfur Precursor Reactivity Affecting the Crystal Phase and Morphology of Cu2−xS Nanoparticles

For plasmonic copper-deficient Cu_2−xS nanoparticles (NPs), accurate control of the crystal phase and morphology is highly desirable as both of which are known to determine the localized surface plasmon resonance (LSPR) wavelength and amplitude. Here, how the sulfur precursor reactivity in the synthesis of Cu_2−xS NPs affects the resulting crystal phase and morphology is examined. Djurleite Cu_1.94S, roxbyite Cu_1.8S, digenite Cu_1.8S as well as covellite CuS nanodisks were synthesized by using 1-dodecanethiol, N,N-dibutylthiourea, and crystal sulfur 1-octadecene/oleylamine solutions and their crystal phase dependent LSPR properties were exhaustively discussed. In addition, crystal phase interconversion between covellite CuS and djurleite/roxbyite Cu_2−xS was realized in the presence of the above sulfur precursors. On the other hand, djurleite Cu_1.94S nanorods rather than nanodisks were prepared by replacing 1-dodecanethiol with more reactive tert-dodecanethiol. The structural and morphological Cu_2−xS NPs here holds great promise in the application of photothermal therapy, photocatalysis, surface-enhanced Raman scattering (SERS), and many others.     

Phase separation dynamics of a poly(vinyl methyl ether)/polystyrene (PVME/PS) blend studied by ultrafast differential scanning calorimetry

In this work, ultrafast differential scanning calorimetry (UFDSC) is used to study the dynamics of phase separation. Taking poly(vinyl methyl ether)/polystyrene (PVME/PS) blend as the example, we firstly obtained the phase diagram that has lower critical solution temperature (LCST), together with the glass transition temperature (T_g) of the homogeneous blend with different composition. Then, the dynamics of the phase separation of the PVME/PS blend with a mass ratio of 7:3 was studied in the time range from milliseconds to hours, by the virtue of small time and spatial resolution that UFDSC offers. The time dependence of the glass transition temperature (T_g) of PVME‐rich phase, shows a distinct change when the annealing temperature (T_a) changes from below to above 385 K. This corresponds to the transition from the nucleation and growth (NG) mechanism to the spinodal decomposition (SD) mechanism, as was verified by morphological and rheometric investigations. For the SD mechanism, the temperature‐dependent composition evolution in PVME‐rich domain was found to follow the Williams–Landel–Ferry (WLF) laws. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1357–1364     

Automated capillary electrophoresis with on-line preconcentration by solid phase extraction using a sequential injection manifold and contactless conductivity detection

An extension of a capillary electrophoresis instrument coupled to a sequential injection analysis manifold was developed for automated measurements with on-line solid-phase extraction preconcentration. An in-house built capacitively coupled contactless conductivity detector was employed for sensitive detection with narrow capillaries of 25 μm internal diameter. The system was assembled into standardized 19 in. frames and racks for easy transport and mobile deployment. The system can be left running unattendedly without manual intervention with good operation stability. To demonstrate the application of the system, a method for the determination of four drugs, namely ibuprofen, diclofenac, naproxen and bezafibrate, was developed with enrichment factors of up to several hundreds. Detection of the drug residues down to the nM-scale was found possible and the method was found suitable for the detection of ibuprofen in the waste water of a hospital in Hanoi.     

The Effect of Some Physical Factors on the II → I Phase Transition of Isotactic Polybutene-1

Abstract

Isotactic polybutene-1 exhibits excellent physical, mechanical and chemical properties dependent on its most important polymorphic crystal forms, called forms I, II and III. The most stable form, form I, is generated via a slow, solid-state transformation of the tetragonal, kinetically favored form II. The slow transformation rate of form II to I, accompanied by sample shrinkage, attains its maximum at ca 25?°C and takes 7–10?days, which is a technical problem for iPB-1 practical applications. We describe here the results reported in the literature by the authors and others of the effect of various physical factors that affect the transformation rate, with the goal of determining means of accelerating it; it is noted explanations of the effects are limited and in many cases, not given.     

First-principles study of structural stability and elastic property of pre-perovskite PbTiO3

The structural stability and the elastic properties of a novel structure of lead titanate,which is named preperovskite PbTiO₃ （PP-PTO） and is constructed with TiO₆ octahedral columns arranged in a one-dimensional manner,are investigated by using first-principles calculations.PP-PTO is energetically unstable compared with conventional perovskite phases,however it is mechanically stable.The equilibrium transition pressures for changing from preperovskite to cubic and tetragonal phases are 0.5 GPa and 1.4 GPa,respectively,with first-order characteristics.Further,the differences in elastic properties between pre-perovskite and conventional perovskite phases are discussed for the covalent bonding network,which shows a highly anisotropic character in PP-PTO.This study provides a crucial insight into the structural stabilities of PP-PTO and conventional perovskite.     

Approximant crystals of icosahedral Mg–(Ga,Al)–Zn alloys

The zero field cooled (ZFC) and field cooled (FC) low-field magnetic moment m of a dense frozen ferrofluid containing Fe₅₅Co₄₅ particles of size 4.6nm in hexane exhibits irreversibility at temperatures T?T _b≈ 30?K. FC in μ ₀ H ≤ 1?T gives rise to shifted minor hysteresis loops below T _b. At T _c≈ 10?K, sharp peaks of m ^ZFC and of the ac susceptibility χ ′, a kink of the thermoremanent magnetic moment m ^TRM, a sizeable reduction of the coercive field H _c, and the appearance of a spontaneous moment m ^SFM indicate a phase transition with near mean-field critical behaviour of both m ^SFM and χ ′ . These features are explained within a core-shell model of nanoparticles, whose strongly disordered shells gradually become blocked below T _b, while their soft ferromagnetic cores couple dipolarly and become superferromagnetic (SFM) below T _c.     

Relation between interfacial shear strength and compressive strength of carbon fiber/epoxy resin composite strands

The mechanism with which the fiber-matrix interfacial strength exerts its influence on the compressive strength of fiber reinforced composites has been studied by measuring the axial compressive strength of carbon fiber/epoxy resin unidirectional composite strands having different levels of interfacial shear strength. The composite strands are used for experiments in order to investigate the compressive strength which is not affected by the delamination taking place at a weak interlayer of the laminated composites. The interfacial strength is varied by applying various degrees of liquid-phase surface treatment to the fibers. The efficiency of the compressive strength of the fibers utilized in the strength of the composite strands is estimated by measuring the compressive strength of the single carbon filaments with a micro-compression test. The compressive strength of the composite strands does not increase monotonically with increasing interfacial shear strength but showes lower values at higher interfacial shear strengths. With increasing interfacial shear strength, the suppression of the interfacial failure in the misaligned fiber region increases the compressive strength, while at higher interfacial shear strengths, the enhancement of the crack sensitivity decreases the compressive strength.     

Calibration of the complex matrix effects on the sampling of polycyclic aromatic hydrocarbons in milk samples using solid phase microextraction

Solid phase microextraction (SPME), a simple, fast and promising sampling technique, has been widely used for complex sample analysis. However, complex matrices could modify the absorption property of coatings as well as the uptake kinetics of analytes, eventually biasing the quantification results. In the current study, we demonstrated the feasibility of a developed calibration method for the analysis of polycyclic aromatic hydrocarbons (PAHs) in complex milk samples. Effects of the complex matrices on the SPME sampling process and the sampling conditions were investigated. Results showed that short exposure time (pre-equilibrium SPME, PE-SPME) could increase the lifetime of coatings, and the complex matrices in milk samples could significantly influence the sampling kinetics of SPME. In addition, the optimized sampling time, temperature and dilution factor for PAHs were 10 min, 85 °C and 20, respectively. The obtained LODs and LOQs of all the PAHs were 0.1–0.8 ng/mL and 1.4–4.7 ng/mL, respectively. Furthermore, the accuracy of the proposed PE-SPME method for milk sampling was validated by the recoveries of the studied compounds in two concentration levels, which ranged from 75% to 110% for all the compounds. Finally, the proposed method was applied to the screening of PAHs in milk samples.     

Impact of side‐chain length on the phase structures of P3ATs and P3AT:PCBM films as revealed by SSNMR and FTIR

It is known that poly(3‐alkylthiophene) (P3AT) side‐chain length notably influences the photovoltaic performances of relating devices. However, comprehensively study on its impact on the structures of P3ATs and their blends with [6, 6]‐phenyl‐C₆₁ butyric acid methyl ester (PCBM) is insufficient. By using solid‐state NMR and FTIR techniques, four P3ATs and their PCBM blends are investigated in this work, focusing on the phase structures as modulated by side‐chain length. Recently, we revealed multiple crystalline main‐chain packings of packing a and b together with a mesophase in poly(3‐butylthiophene) (P3BT) films (DOI: 10.1021/acs.macromol.6b01828). Here, the semicrystalline structures are investigated on poly(3‐hexylthiophene) (P3HT), poly(3‐octylthiophene) (P3OT), and poly(3‐dodecylthiophene) (P3DDT) with traditional form I modification, where packing a and the amorphous phase are probed. Furthermore, crystallized side chain within packing a is detected in both P3OT and P3DDT films, which shows a FTIR absorption at 806 cm⁻¹. Structural studies are also conducted on P3AT:PCBM blends. Compared with the pure P3ATs, the polymer crystallinities of the blends show reduction of about 40% for P3OT and P3DDT, whereas only about 10% for P3HT. Moreover, in P3BT:PCBM and P3HT:PCBM, the crystalline polymers and PCBM are phase separated, while in P3OT:PCBM and P3DDT:PCBM, blend components are mostly miscible. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 751–761