Interfacial behavior of plant proteins — novel sources and extraction methods

Understanding the air-water and oil-water interfacial behavior of plant proteins is crucial for developing stable emulsions and foams in food systems. Plant crops are often processed into protein extracts with high purity, which primarily consist of globulins. These globulins are often unable to form stiff interfacial layers owing to their compact and highly aggregated state and have inferior functionality compared with animal-derived proteins from milk or eggs. Much of the current focus is on modifying these proteins, whereas better interface stabilizing functionality can also be obtained by choosing more targeted protein extraction methods. This review will highlight the benefits and drawbacks of current and novel protein sources and protein extraction methods with respect to interfacial properties.     

LaTiO高k栅介质Ge MOS电容电特性及Ti含量优化

采用共反应溅射法将Ti添加到La_2O_3中,制备了LaTiO/Ge金属-氧化物-半导体电容,并就Ti含量对器件电特性的影响进行了仔细研究.由于Ti-基氧化物具有极高的介电常数,LaTiO栅介质能够获得高k值;然而由于界面/近界面缺陷随着Ti含量的升高而增加,添加Ti使界面质量恶化,进而使栅极漏电流增大、器件可靠性降低.因此,为了在器件电特性之间实现协调,对Ti含量进行优化显得尤为重要.就所研究的Ti/La_2O_3比率而言,18.4%的Ti/La_2O_3比率最合适.该比率导致器件呈现出高k值(22.7)、低D_(it)(5.5×10~(11)eV~(-1)·cm~(-2))、可接受的J_g(V_g=1V,J_g=7.1×10~(-3)A·cm~(-2))和良好的器件可靠性.     

Spectral probing of carrier traps in Si–Ge alloy nanocrystals

Photogenerated carriers in Si–Ge alloy nanocrystals (NCs) prepared by co‐sputtering method were investigated by mean of transient induced absorption. The carrier relaxation features multiple components, with three decay life times of τ ≈ 600 fs, 12 ps, and 15 ns, established for Si_0.2Ge_0.8 alloy NCs of a mean crystal size of 9 nm and standard deviation of 3 nm. Deep carrier traps, identified at the boundary between the NCs and the SiO₂ host with the ionization energy of about 1 eV, are characterized by a long‐range Coulombic potential. These are responsible for rapid depletion of free carrier population within a few picoseconds after the excitation, which explains the low emissivity of the investigated materials, and also sheds light on the generally low luminescence of Si/Ge and Ge NCs. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Charge transport in anodic TiO2 nanotubes studied by terahertz spectroscopy

We report on the photoelectrochemical and terahertz measurements, of the charge transport properties of 1 μm thick self‐organized TiO₂ nanotube layers, prepared by the anodization of titanium. We provide evidence regarding the complexity of electron transport, and dynamics in the nanotubes. Shortly after photoexcitation, charge mobilites in amorphous and crystalline nanotubes are similar, but still lower compared to the bulk anatase. The mobility subsequently decreases due to trapping‐detrapping processes. The recombination rate in anatase nanotubes is much slower than in the amorphous ones, enabling the material to reach an internal photon to electron conversion efficiency exceeding 60%.     

Numerical study for the electrified instability of viscoelastic cylindrical dielectric fluid film surrounded by a conducting gas

The linear electrohydrodynamic cylindrical instability of annular Walters B^′${\mathrm{B}}^{\prime }$ viscoelastic dielectric fluid layer surrounded by a conducting gas in the presence of radial electric field is investigated. The obtained dispersion relation is found to be complicated and cannot be treated theoretically easily. Two limiting cases of interest are investigated, when the inertia is dominant, and when both the kinematic viscosity and viscoelasticity are high, and the corresponding new stability conditions are obtained for both cases. We solve the eigenvalue problem numerically using the continuation method which gives better results than the classical non-linear solvers such as Newton and Secant methods. It is found that the applied radial electric field has a dual role on the stability of the considered system, depending of the chosen wavenumbers range. Both the kinematic viscoelasticity and liquid depth are found to have stabilizing effects, while both the kinematic viscosity and surface tension have destabilizing effects on the considered system. The stability or instability breaks down for critical wavenumber values at which the growth rate vanishes. The behaviors of both the maximum growth rate and the corresponding dominant wavenumber are discussed in detail corresponding to the effect of all physical parameters. Finally a comparison between the results obtained here for Walters B^′${\mathrm{B}}^{\prime }$ viscoelastic fluids, and those obtained here too if the fluid is replaced by a Rivlin–Ericksen viscoelastic one is achieved. The limiting cases of absence of electric field and/or kinematic viscoelasticity are also investigated in detail.     

Interface formation of Al2O3 on n‐GaN(0001): Photoelectron spectroscopy studies

Al₂O₃ insulator layers were deposited step by step by the physical vapor deposition (PVD) method onto gallium nitride in the wurtzite form, n‐type and (0001)‐oriented. The substrate surface and the early stages of Al₂O₃/n‐GaN(0001) interface formation were characterized in situ under ultra‐high vacuum conditions by X‐ray and ultraviolet photoelectron spectroscopy (XPS, UPS). The electron affinity (EA) of the substrate cleaned by annealing was 3.6 eV. Binding energies of the Al 2p (76.0 eV) and the O 1s (532.9 eV) confirmed the creation of the Al₂O₃ compound in the deposited film for which the EA was 1.6 eV. The Al₂O₃ film was found to be amorphous with a bandgap of 6.9 eV determined from the O 1s loss feature. As a result, the calculated Al₂O₃/n‐GaN(0001) valence band offset (VBO) is ?1.3 eV and the corresponding conduction band offset (CBO) 2.2 eV.     

Electrospray ionization stability and concentration sensitivity in capillary electrophoresis-mass spectrometry using a flow-through microvial interface

Concentration sensitivity is a key performance indicator for analytical techniques including for capillary electrophoresis-mass spectrometry (CE–MS) with electrospray ionization (ESI). In this study, a flow-through microvial interface was used to couple CE with MS and improve the ESI stability and detection sensitivity. By infusing a peptide mixture through the interface into an MS detector at a typical flow rate for CE-MS analysis, the spatial region near the interface was mapped for MS signal intensity. When the sprayer tip was within a 6 × 6.5 × 5 mm region in front of the MS inlet, the ESI was stable with no significant loss of signal intensity for ions with m/z 239. Finite element simulations showed that the average electric field strength at the emitter tip did not change significantly with minor changes in emitter tip location. Experiments were conducted with four different mass spectrometer platforms coupled to CE via the flow-through microvial interface. Key performance indicators, that is, limit of detection (LOD) and linearity of calibration curves were measured for nine amino acids and five peptides. Inter- and intraday reproducibility were also tested. The results were shown to be suitable for quantification when internal standards were used.     

基于多孔金结构的三相界面酶电极的制备及高效电化学酶传感性能

界面微环境是影响酶催化反应及酶传感性能的关键因素. 本研究基于三维微纳米结构多孔金基底, 通过调控电极表面的亲水和疏水浸润性, 制备了具有固-液-气三相界面微环境的氧化酶电极, 并研究了界面微环境对酶催化反应动力学的影响规律. 基于所制备的三相界面多孔金结构酶电极, 反应物氧气能够从气相直接快速地传输到酶催化反应界面, 极大地提升了界面氧气浓度及其稳定性, 从而大幅度提高了氧化酶活性及酶电极响应的稳定性. 以葡萄糖为模型待测物, 基于该三相界面酶电极的电化学酶生物传感器拥有宽的线性范围、 高的灵敏度、 低的检出限以及良好的稳定性. 这类独特的三相反应界面设计为高效酶生物传感器的建构以及生物分子的精准检测提供了新思路.     

基于表界面反应及优化的锂金属电池研究进展

金属锂具有高理论比容量和低还原电位, 是锂电池阳极的理想材料之一. 但在长期循环充放电过程中, 金属锂因锂枝晶生长会导致出现界面恶化及能量损失严重等问题, 对锂金属电极与电解质表界面反应的优化是一个重要研究方向. 本文介绍了锂枝晶产生的危害, 从分析及抑制锂枝晶沉积两方面综合评述了为解决这一问题所采取的方法, 包括固态电解质界面形成机制和保护机理、 表面改性、 三维锂阳极和液态/固态电解质等方法, 总结了各种方法的优劣势, 并展望锂金属电池在能源领域的研究前景.     

OPC技术在设备监控系统中的应用

本文主要从0PC技术的定义和对象方面展开,在对OPC技术进行简要介绍的基础上,探讨了0PC服务器与OPC客户端的通信实现,结合实际,着重介绍其在某个iFIX监控平台中的应用。实践结果证明：将OPC技术应用在iFIX监控平台中,可以很好的实现软硬件的兼容,有利于减少软硬件的重复开发,大大的节省了人力、物力,满足了实际需求。