离聚体的结构表征 Ⅲ.EXAFS法测定含氟的铜离聚体的精细结构

本文报道了用先进的EXAFS及ESR等方法研究了羧酸型含氟的铜(Ⅱ)离聚体离子微区的内部精细结构,结果表明,铜离聚体的离子微区主要由羧酸根桥键的双核配位结构单元及平面四方形的配位结构单元等聚集而成。在双核配位结构单元中第一层为Cu~(2+)—O配位,配位数为4,配位键键长为1.96A,第二配位层为Gu~(2+)—Cu~(2+)配位,Cu~(2+)—Gu~(2+)间距为2.64A。平面四方形的配位结构单元Cu~(2+)—O的配位数为4,配位键键长为1.96A。共聚物中羧基含量对离聚体的基本配位结构单元和离子微区的精细结构影响较小,但对微区大小有影响。     

A generalized equation describing isotope exchange kinetics at solid-liquid interface

A generalization of the kinetic equation for the isotope exchange at solid—liquid interface is presented. The generalized equation may be used to describe kinetics of the isotope exchange process limited by surface reactions and diffusion without assumption of spherical symmetry of solid particles.

---

Eine generalisierte Gleichung für die Kinetik des Isotopenaustausches an Fest-Flüssig-Phasengrenzen

Zusammenfassung Es wird eine generalisierte kinetische Gleichung angegeben, die die Kinetik des Isotopenaustausches an Fest-Flüssig-Phasengrenzen beschreibt, wobei der Austauschprozeß durch Oberflächenreaktionen und Diffusion ohne der Annahme sphärischer Symmetrie für die festen Partikel begrenzt ist.

     

Formal Mathematical Analysis of the Existence of the Common Intersection Point in Relation to Determining the Parameters Describing Ion Adsorption at the Oxide/Electrolyte Interface: Comparison of the Triple and Four-Layer Models

For most oxide/electrolyte systems potentiometric titration curves measured for different ionic strengths have a Common Intersection Point (CIP) which corresponds to the Point of Zero Charge (PZC). However, there are systems where a CIP exists but the surface charge at this point does not equal zero (PZC CIP). In this paper theoretical analysis of the systems in which the PZC and CIP do not coincide is presented. It is based on the well-known 2-pK surface charging approach and Triple Layer Model (TLM) as well as the Four Layer Model (FLM) of the electric double layer. The appropriate mathematical criterion for CIP existence was applied with detailed derivations, both for TLM and FLM. Having determined in this manner the parameter values, one can draw proper conclusions about the features of oxide/electrolyte adsorption systems, in which PZC and CIP do not coincide. The values of adsorption parameters are found by fitting simultaneously the obtained theoretical expressions to both of the experimental titration isotherms, and to the individual isotherms of electrolyte cation adsorption measured using radiometric methods.     

Novel Poly（thienylene Ethynylene）s with Electron-accepting Groups

Since the early works of A. J. Heeger, A G. MacDiarmid and Hideki Shirakawa on semiconducting polymers, π-conjugated oligomers and polymers have been actively investigated for a variety of optoelectronic applications, such as field effect transitors (FET…     

CeO2—LnO1.5固溶体的表征及其甲烷催化燃烧性能

向CeO2中引入Ln3 离子后形成的CeO2－LnO1.5（Ln=La，Nd，Sm，Gd）固溶体（n（Ce）：n（Ln）=1：1）是一种无贵金属的新型高效甲烷燃烧催化剂．比表面、XRD、Raman、TEM等分析证实，这类固溶体具有部分畸变的萤石结构，Ln3 进入晶格后诱发的结构变化使得团溶体的表面和本体能同时参与氧化还原反应．实验表明，该固态溶液体系是甲烷催化燃烧的良好催化剂．     

Purification and characterization of an extracellular α-l-arabinofuranosidase from Fusarium oxysporum

An α-l-arabinofuranosidase from Fusarium oxysporum F3 was purified to homogeneity by a two-step ion exchange intercalated by a gel filtration chromatography. The enzyme had a molecular mass of 66 kDa and was optimally active at pH 6.0 and 60°C. It hydrolyzed aryl α-l-arabinofuranosides and cleaved arabinosyl side chains from arabinoxylan and arabinan. There was a marked synergistic effect between the α-l-arabinofuranosidase and an endo-(1 →4)-β-d-xylanase produced by F. oxysporum in the extensive hydrolysis of arabinoxylan.     

Separation of carbon nanotubes by frit inlet asymmetrical flow field-flow fractionation

Flow field-flow fractionation (flow FFF), a separation technique for particles and macromolecules, has been used to separate carbon nanotubes (CNT). The carbon nanotube ropes that were purified from a raw carbon nanotube mixture by acidic reflux followed by cross-flow filtration using a hollow fiber module were cut into shorter lengths by sonication under a concentrated acid mixture. The cut carbon nanotubes were separated by using a modified flow FFF channel system, frit inlet asymmetrical flow FFF (FI AFIFFF) channel, which was useful in the continuous flow operation during injection and separation. Carbon nanotubes, before and after the cutting process, were clearly distinguished by their retention profiles. The narrow volume fractions of CNT collected during flow FFF runs were confirmed by field emission scanning electron microscopy and Raman spectroscopy. Experimentally, it was found that retention of carbon nanotubes in flow FFF was dependent on the use of surfactant for CNT dispersion and for the carrier solution in flow FFF. In this work, the use of flow FFF for the size differentiation of carbon nanotubes in the process of preparation or purification was demonstrated.     

Chemical maps of patterned samples by microline‐imaging laser‐induced plasma spectrometry

The potential of a microline‐imaging laser‐induced plasma spectrometry (LIPS) system for surface and depth analysis of heterogeneous solid samples in air at atmospheric pressure has been demonstrated. A pulsed Nd : YAG laser beam operating at 532 nm, with a homogeneous energy distribution (flat top laser), was used to generate a microline plasma on the sample surface. Subsequent light from the microline plasma was resolved spectrally and spatially and detected with an imaging spectrograph and an intensified charged‐coupled device detector. A patterned metal sample was chosen as the most appropriate for this study. Three‐dimensional chemical maps of Ni and Cu from the edge connectors of a printed circuit board have been obtained. With this experimental configuration, the lateral resolution (limited by crater width) was 42 µm and the spatial resolution along the spectrometer slit was 17.4 µm. The results illustrate the capability of microline imaging for fast mapping of large‐area samples and for depth profiling purposes. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis and characterization of PAni–SiO2 and PTh–SiO2 nanocomposites' thin films by plasma polymerization

In the present work, we explore the possibility to deposit polyaniline–silicon dioxide (PAni–SiO₂) and polythiophene–silicon dioxide (PTh–SiO₂) nanocomposites through a plasma polymerization route. The films were generated by spraying of mixtures of nano-sized silica particles dispersed in the liquid monomer into a plasma stream of the DC-plasma discharge reactor. The silica in the resulted polymer matrix changes the conduction mechanisms varying from ohmic to ballistic and traps inducing the space charged limited currents (SCLC). The silica modifies the morphology and composition of the deposited films.     

一种新型共生沸石(T-L)的合成与表征

在Na₂O-K₂O-Al₂O₃-SiO₂-H₂O体系中水热合成了一种新型的共生沸石, 它由L型沸石生长在T型沸石的一端而形成, 称之为T-L型沸石. 通过XRD, SEM, TEM, EDX, IR等手段对其进行了初步的表征. SEM相片表明这种沸石具有特殊的铆钉状外形; 在TEM相片上可以清楚地看到L型沸石的大孔道, 此孔道与L型沸石的表面垂直. 通过EDX的数据计算发现共生沸石的两相有不同的骨架硅铝比: T型沸石部分Si/Al＝3.71, L型沸石部分Si/Al＝3.41. 在该样品中B酸大于L酸.