聚苯乙烯乳胶球三维有序体的制备及其显微形貌表征

A three-dimensional (3D) ordered structure was achieved by self-organization of monodisperse polystyrene latex about 250nm in diameter after being ambient dried. The stacked morphology was investigated by scanning electron microscopy(SEM) observation. It is shown that the face-centered cubic(FCC) phase dominantly exists. This finding presents a potential template for preparing an inverse FCC structure as a photonic crystal of full band gap if the index contrast is higher than 2.8.     

含铜MCM—41型分子筛的合成与表征

本文首次合成出一种具有MCM-41型结构的中孔（mesoporous）CuMCM-41分子筛，通过XRD、骨架IR、紫外漫反射、电子自旋共振、固体魔角核磁、TG—DTA等测试结果，表征铜（Ⅱ）在分子筛中四面体配位和八面体配位形式共存。     

Characterization of Heterogeneous Catalysts by use of Test Reactions

The following report gives an overview on work done in the Catalysis Laboratory of the Department of Chemistry, National University of Singapore over the last 15 years (1989–2004). Much of this work can be described as “characterization of catalytically active surfaces through test reactions”. The methods, systems studied and the reactions that we evaluated will be described. The review will mostly concentrate on work from the authors’ laboratory, but other relevant work will also be cited.     

Effect of heat treatment on the physico-chemical properties and catalytic activity of manganese nodules leached residue towards decomposition of hydrogen peroxide

The effect of calcination temperature on the physico-chemical characterization of manganese nodule leached residue (MNLR) and water-washed manganese nodule leached residue (WMNLR) has been investigated on the basis of chemical analysis, XRD, TG-DTA, FTIR, surface hydroxyl groups, surface oxygen, reducing and oxidizing sites, surface area. XRD and IR confirm the presence of amorphous iron oxyhydroxides, delta-MnO2, which are converted to alpha-Fe2O3 and gamma-Mn2O3 phases above 400 degrees C of calcination, respectively. A solid solution of Fe2O3 and Mn2O3 is formed above 700 degrees C. The surface area, surface hydroxyl group, surface oxygen, reducing and oxidizing sites increase with the increase in calcination temperature up to 400 degrees C and then decrease with further rise in calcination temperature up to 700 degrees C. The catalytic activity of the sample towards H2O2 decomposition shows the similar trend as surface properties. A suitable Mn(3+)Mn4+ couple favours H2O2 decomposition reaction. The activity has been correlated with various physico-chemical properties.     

含硫希夫碱的合成研究

合成了一种含硫希夫碱—1，4-双[(2’-甲醛缩硫代氨基脲基)苯氧甲基]乙烷及其中间产物1，4-双[(2’-甲醛)苯氧甲基]乙烷．其结构经元素分析，IR和1H NMR表征。     

Solid state photoreactions occurring at the interface between crystallites of two different organic compounds

This paper deals with the solid state bimolecular photoreactions occurring at the interface between crystallites of two different organic compounds prepared as a polycrystalline mixture by melting-resolidification. The photoreactions include the photoaddition of NH compounds to aromatic and olefinic double bonds, hydrogen abstraction, condensation reaction via photoelectron transfer and [2+2] photoaddition. Particular attention is focused on the characterization of the polycrystalline mixture, the selectivity of the photoreactions in the solid state compared with those in the solution phase and the factors controlling the photoreactions.     

全二维液相色谱（NPLC×RPLC）接口及其应用

用内径为0．53mm的填充毛细管正相液相色谱为第一维，用4．6mm（i．d．）×50mmRP-18e整体柱反相色谱为第二维，建立了定量环一阀切换接口的全二维液相色谱系统（NPLC×RPLC）．第一维色谱分离洗脱出的组分交替存储在十通阀上的两个定量环中，同时定量环中前一个组分被转移到第二维进行反相分离．因为第一维的流动相流量仅是第二维的1／500，自然解决了流动相兼容问题．采用芳香族化合物的混合物和中药丹参正己烷提取液对该全二维液相系统的分离能力进行了评价．     

含聚硅氧烷链双马来酰亚胺的合成与表征

合成了Ｎ－（４－羟基苯基）马来酰亚胺和含聚硅氧烷链双马来酰亚胺，并用ＦＴＩＲ、１ＨＮＭＲ、元素分析、ＧＰＣ、ＤＴＡ和ＴＧ对其进行了表征。     

Synthesis and characterization of sodium titanates Na2Ti3O7 and Na2Ti6O13

Na₂Ti₃O₇ and Na₂Ti₆O₁₃ were synthesized by sol-gel method in order to obtain pure phases. Different heat-treatments were applied on powders and pellets of these materials. The effects were studied by XRD, dilatometry, TGA-DTA, SEM and electrochemical impedance spectroscopy. Pure Na₂Ti₃O₇ was obtained at 973 K. Sintering at 1373 K caused a partial decomposition into Na₂Ti₆O₁₃. The Na₂Ti₃O₇ powder sintered at 1273 K showed polygonal microstructure. Na₂Ti₃O₇ pellets sintered at 1323 K for 10 h exhibited large structures. This latter microstructure decreased the electrical conductivity of Na₂Ti₃O₇. Pure Na₂Ti₆O₁₃ was obtained at 873 K. Sintering at 1073 K caused a partial decomposition into TiO₂ (rutile). Na₂Ti₆O₁₃ pellets sintered at 1323 K for 10 h exhibited common shrinkage behavior. This shrinkage process increased the electrical conductivity of this material. The presence of TiO₂ resulted in a oxygen partial pressure dependence of the electrical conductivity.