Synthesis of polyacrylonitrile via reverse atom transfer radical polymerization catalyzed by FeCl3/isophthalic acid

FeCl₃ coordinated by isophthalic acid was first used as a catalyst in the azobisisobutyronitrile‐initiated reverse atom transfer radical polymerization of acrylonitrile. N,N‐Dimethylformamide was used as a solvent to improve the solubility of the ligand. An FeCl₃‐to‐isophthalic acid ratio of 0.5 not only gave the best control of the molecular weight and its distribution but also provided rather a rapid reaction rate. The effects of different solvents on the polymerization of acrylonitrile were also investigated. The rate of the polymerization in N,N‐dimethylformamide was faster than that in propylene carbonate and toluene. The molecular weight of polyacrylonitrile agreed reasonably well with the theoretical molecular weight in N,N‐dimethylformamide. The rate of polymerization increased with increasing polymerization temperature, and the apparent activation energy was calculated to be 59.9 kJ mol^?1. Reverse atom transfer radical polymerization was first used to successfully synthesize acrylonitrile polymers with a molecular weight higher than 80,000 and a narrow polydispersity as low as 1.22. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 219–225, 2006     

Chiral soluble polymers and microspheres for enantioselective crystallization

A series of chiral polymers based on poly(N‐acryl) amino acids was synthesized using a convergent synthetic approach. These chiral polymers have been used as chiral additives to induce enantioselective crystallization of racemic or conglomerate amino acids in solutions. These polymeric additives showed strong capabilities to enhance highly enantioselective resolution during the crystallization of amino acids. In addition, these polymers caused unusual modifications of amino acid crystal morphologies. Furthermore, spherical microparticles of those same chiral polymers were also shown active in similar chiral discriminations during amino acid crystallizations occurring on microparticle surfaces. Our study demonstrates the high potential of chiral polymers and microparticles to resolve amino acids throughout crystallization processes. High enantiomeric excesses in one targeted enantiomer of amino acids can also be maximized via time‐dependent kinetic control of crystallizations. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3009–3017, 2006     

Mathematical modeling of crystallization analysis fractionation (Crystaf) of polyethylene

Four polyethylene samples (PE) with different molecular weight distributions (MWD) were analyzed by crystallization analysis fractionation (Crystaf) at several cooling rates to investigate the effect of MWD and cooling rate on their Crystaf profiles. Using these results, we developed a mathematical model for Crystaf that considers crystallization kinetic effects, which are ignored in all previous Crystaf models. The Crystaf model we proposed can fit the experimental Crystaf profiles of the 4 polyethylene resins very well. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2749–2759, 2006     

Effect of the environment on the stability of surfactant–polypeptide self‐assembled complexes: Molecular dynamics simulations of stoichiometric complexes formed by N‐dodecyltrimethylammonium and poly(α,L‐glutamate) in chloroform,methanol, and water

A series of molecular dynamics simulations have been performed to study the supramolecular structure of self‐assembled complexes formed by N‐dodecyltrimethylammonium cations and the synthetic polypeptide poly(α,L ‐glutamate). The influence of the type of solvent has been investigated, considering explicit environments of chloroform, water, and methanol on a stoichiometric complex containing 15 residues. In chloroform, the complex stabilizes in a regular structure: the polypeptide adopts an α‐helix conformation that is regularly surrounded by surfactant molecules to form electrostatic interactions through a multiple interaction pattern. However, this structure destabilizes in methanol and water: (a) the α‐helix unfolds in the two solvents and (b) the electrostatic links between the surfactant molecules and the polyanion are disrupted in aqueous solution, although these interactions are still preserved in methanol. The role of the solvent environment in stabilizing or destabilizing the polypeptide secondary structure, the organization of the surfactant molecules, and predominantly the surfactant–polypeptide supramolecular organization is discussed in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1122–1133, 2006     

次近邻相互作用对Heisenberg XX链纠缠影响的研究

研究了存在次近邻相互作用(耦合)时Heisenberg XX链的纠缠特性. 结果表明对近邻格点, 随着耦合常数J的变化, 次近邻相互作用的存在可能使其纠缠度增大或者减小; 而对次近邻格点, 引进次近邻相互作用却可以产生纠缠, 并且使其随着|J|的增大而增大. 近邻格点间纠缠存在的临界温度T_c随着J的增大而降低, 次近邻格点间纠缠存在的临界温度T_c随着|J|的增大而升高. 此外对纠缠W态的制备, 次近邻相互作用的存在还使得三量子位情形时W态产生的时刻改变, 而对于四量子位情形却没有影响.     

Construction of 2Ⅲ^[m-（m-k）] Designs with the Maximum Number of Clear Two-factor Interactions

It is useful to know the maximum number of clear two-factor interactions in a_Ⅲ~(m-(m-k))design.This paper provides a method to construct a 2_Ⅲ~(m-(m-k))design with the maximum number of clear two-factorinteractions.And it is proved that the resulting designs have more clear two-factor interactions than thoseconstructed by Tang et al.Moreover,the designs constructed are shown to have concise grid representations.     

部分子相互作用与(S_(NN))~(1/2)=130GeV Au-Au碰撞中两粒子的横向动量关联(英文)

采用蒙特卡罗模型AMPT 究了(S_(NN))~(1/2)=130GeV Au Au碰撞中部分子相互作用对两粒子横向动量关联的影响,结果表明部分子相互作用对两粒子的横向动量关联有重要的贡献．还计算了AMPT模型中(S_(NN))~(1/2)=130GeV Au Au碰撞的两粒子横向动量关联与碰撞对心性的依赖关系并与来自STAR的实验数据进行了比较,发现AMPT的理论预言很好地符合实验数据．     

Molecular deposition film of porphyrin and phthalocyanine bearing oppositely charged substituents

Ｔｈｅｆｏｒｍａｔｉｏｎｏｆａｎｅｗｔｙｐｅｏｆｓｅｌｆ＿ａｓｓｅｍｂｌｅｄｍｕｌｔｉｌａｙｅｒｆｉｌｍｓ,ｍｏｌｅｃｕｌａｒｄｅｐｏｓｉｔｉｏｎ(ＭＤ)ｆｉｌｍｓ[1,2],ｉｓａｆａｓｔｄｅｖｅｌｏｐｉｎｇａｒｅａｏｆｔｈｉｎｆｉｌｍｒｅｓｅａｒｃｈ.Ｔｈｉｓｎｅｗｍｅｔｈｏｄｏｆｆｉｌｍｐｒｅｐａｒａｔｉｏｎｉｓｂａｓｅｄｏｎｉｏｎｉｃａｔｔｒａｃｔｉｏｎｂｅｔｗｅｅｎｏｐｐｏｓｉｔｅｃｈａｒｇｅｄｃｈｒｏｍｏｐｈｏｒｅｓ.ＩｎｃｏｍｐａｒｉｓｏｎｗｉｔｈｔｈｅｃｌａｓｓｉｃＬａｎｇｍｕｉｒ＿Ｂｌｏ…     

On the Snider equation

We study the physical content of the Snider quantum transport equation and the origin of a puzzling feature of this equation, which implies contradictory values for the one-particle density operator. We discuss in detail why the two values are in fact not very different provided that the studied particles have sufficiently large wave packets and only a small interaction probability, a condition which puts a limit on the validity of the Snider equation. In order to improve its range of application, we propose a reinterpretation of the equation as a mixed equation relating the real one-particle distribution function (on the left-hand side of the equation) to the free distribution (on the right-hand side), which we have introduced in a recent contribution. In its original form, the Snider equation is valid only when used to generate Boltzmann-type equations where collisions are treated as point processes in space and time (no range, no duration); in this approximation, virial corrections are not included, so that the real and free distributions coincide. If the equation is used beyond this approximation to generate nonlocal and density corrections, we conclude that the results are not necessarily correct.     

Purification and partial characterization of two lectin isoforms fromCratylia mollis mart. (camaratu bean)

Two additional electrophoretically distinct molecular forms, isoforms (iso) 2 and 3, with lectin properties were isolated fromCratylia mollis Mart, seeds (FABACEAE), by extraction with 0.15M NaCl and ammonium sulfate fractionation, followed by chromatography on Sephadex G-75 and Bio-Gel P-200 (iso 2), as well as CM-Cellulose and Sephadex G-75 (iso 3). Both isoforms were human group nonspecific and showed distinct specificity. Polyacrylamide gel electrophoresis resolved iso 2 and 3 in polypeptides of apparent mol wts 60 and 31 kDa, respectively; a distinct isoelectric focusing pattern was obtained for iso 2 and 3, under denaturing and reducing conditions.