脊形波导中导模传输与损耗的分析与计算

本文运用有效折射率法把脊形波导化成等效二维平板波导后,再运用微分法求出弱吸收情况下波导模的吸收损耗,其方法简便,精确度高.     

液晶空间光调制器在光信息综合实验中的应用

提出了一种把液晶空间光调制器应用于光电信息综合实验的光学实验系统。系统中的空间光调制器采用光寻址液晶光阀和电寻址液晶光阀。给出了利用这一系统开设的四个光学信息处理实验。实践表明,该系统具有较好的教学效果。     

大功率固态调制器的仿真研究

 设计了大功率固态调制器的新型固态脉冲开关模块。通过分析电力电子仿真软件Saber中绝缘栅双极晶体管(IGBT)物理模型的概念和等效电路,结合实验数据建立了IXDH20N120型IGBT的模型,研究了Saber环境下,不同参数条件和拓扑结构对调制器电路输出特性的影响。仿真结果表明：动态均压网络在有效地保护开关的同时,可以减少IGBT的开关损耗;电路中器件离散性与系统分布参数会造成调制器输出波形质量下降,效率降低。并对调制器在负载打火情况下,因严重不均流而损坏器件故障的机理作了分析,实验证明仿真结果和分析与实际相符。     

III–V based-semiconductor photonic crystals

Three-dimensional (3D) and two-dimensional (2D) photonic crystals based on III–V semiconductors are described. On the 3D photonic crystals, the development of complete photonic crystals at optical wavelengths and their applications to ultrasmall optical integrated circuits including 3D sharp bend waveguide are described. On the 2D photonic crystals, two-unique device and/or phenomena are demonstrated.     

Holographic vibration measurements of rough surfaces using a LCSLM

This paper describes measurements of a vibrating object with rough surface by the time-averaged method of holography using a newly designed optically addressed liquid crystal spatial light modulator with a resolution of 102 lp/mm and a diffraction efficiency of 16%. An object vibrating faster than several tens of Hz could be visualized. The pattern obtained by the method provides the locus of vibrating nodes. The advantage of this method is that a high contrast pattern of a vibrating object can be imaged in near-real-time, although the sensitivity of vibration is decreased.     

Simple Analog Complementary Metal Oxide Semiconductor Circuit for Generating Motion Signal

We proposed in this study a novel analog complementary metal oxide semiconductor (CMOS) circuit for generating a motion signal when an object moves, which is a simple structure. The proposed unit circuit was constructed using a previously proposed edge detection circuit and a novel proposed circuit for generating a motion signal which accepts an edge signal. The part for generating the motion signal was constructed using six metal oxide semiconductor (MOS) transistors and one capacitor. Results obtained by the simulation program with integrated circuit emphasis (SPICE) and the measured results of a test circuit constructed with discrete MOS transistors and the test circuit fabricated with a 1.2 μm CMOS process showed that the proposed unit circuit can output pulsed current (motion signal) when an object moves on the circuit. It was clarified from the SPICE results that the two-dimensional network constructed with proposed unit circuits can output motion signals. The size of the novel unit circuit is expected to be about 110 × 110μm² obtained by the 1.2 μm CMOS process. It is possible to arrange 90 × 90 unit circuits on a chip which has an area of 1 × 1cm². The aperture ratio is expected to be about 21%, which is twice as large as that of the previously proposed circuit. An integrated circuit for image processing in real time can thus be realized by applying the two-dimensional network constructed with the proposed circuits.     

Ultrafast all-optical XOR logic gate based on a symmetrical Mach-Zehnder interferometer employing SOI waveguides

We present an integrated Silicon-on-Insulator (SOI) based Mach-Zehnder interferometer (MZI) in order to perform ultrafast all-optical XOR logic gate operation with a bit rate of ∼ 0.33 Tb/s. A numerical simulation is carried out in order to study various parameters such as extinction ratio and eye-opening parameters, characterizing the performance of the XOR logic gate. The output XOR logic gate signal can have improved extinction and eye margin if the initial powers of primary signals and the probe continuous-wave (CW), and SOI waveguide length are judiciously adjusted.     

Investigation of data format conversions based on MZI-SOA

Employing a Mach-Zehnder Interferometer (MZI), this paper describes simulation demonstration of an all-optical scheme for data format conversion between non-return-to-zero (NRZ) and return-to-zero (RZ). Data format conversion between NRZ and RZ at 120 Gb/s has been simulated for the first time using an MZI. In addition, we have proposed for the first time data format conversion from NRZ to RZ by using a single SOA in an MZI.     

低功耗聚合物Mach-Zehnder热光开关

采用传统的半导体工艺制作了聚合物Mach-Zehnder型热光开关.利用扫描电镜观测波导形貌,通过红外摄像机观测波导的近场输出光斑,在通信波段1 550 nm波长下测试了器件的输出光谱.在电极上施加直流信号,测得热光开关的消光比为－15 dB,驱动功率为16 mW.引入直流偏置网络,获得了器件的开关特性曲线,经测量开关上升时间为1.2 ms,下降时间为0.8 ms.     

Skin-effect analysis of a shielded polymer Y-fed coupler electro-optic modulator over a wide bandwidth of 94 GHz

A novel technique and related formulations are proposed for analyzing the influences of the skin-effect on the performances of a polymer Y-fed coupler electro-optic modulator with shielded push-pull micro-strip electrodes. Using the extended point-matching method, coupled mode theory and electro-optic modulation theory, thorough design and optimization are performed. By introducing the effective applied voltage, formulas of the high-frequency response under skin-effect are deduced, and characteristics under skin-effect are analyzed. Under the central wavelength of 1550 nm, the half-wave voltage is as low as 1.097 V for the device with an active region length about 8.884 mm. Considering the influences of the skin-effect, the 3-dB modulating bandwidth of the microwave signal is up to 94 GHz. A high extinction ratio of more than 20 dB and a low insertion loss of less than 4.18 dB are achieved when the microwave frequency is below 68 GHz under skin-effect. This design technique is proven to be accurate by the comparison with the beam propagation method (BPM).