Numerical analysis for the periodic response of nonsmooth dynamic systems of high-dimension

This paper deals with the numerical solution of high dimensional dynamic systems with nonsmooth characteristics, such as structural elastoplasticity, mechanical clearance and dry friction. As a stable periodic response of the system attracts its transient response, it may be extracted from the transient response somehow. The paper suggests a novel iteration scheme to extrapolate the periodic response from a short time history of its transient response by curve fitting. Compared with the current schemes such as shooting and incremental harmonic balancing, the present scheme makes full use of the information within the transient response and the system characters, then its computation efficiency has increased by an order and the numerical convergence depending on the initial iteration has greatly improved.The subject supported by the Chinese Foundation of Aeronautical Science     

Chain length effect on dynamical structure of poly (vinyl pyrrolidone)-polar solvent mixtures in dilute solution of dioxane studied by microwave dielectric relaxation measurement

Dielectric relaxation study of the binary mixtures of poly(vinyl pyrrolidone) (PVP) (Mw=24000, 40000 and 360000 g mol⁻¹) with ethyl alcohol (EA) and poly(ethylene glycol)s (PEGs) (Mw=200 and 400 g mol⁻¹) in dilute solutions of dioxane were carried out at 10.1 GHz and 35°C. The relaxation time of PVP-EA mixtures was interpreted by the consideration of a wait-and-switch model in the local structure of self-associated ethyl alcohol molecules and also the PVP chain length as a geometric constraint for the reorientational motion of ethyl alcohol molecules. The formation of complexes and effect of PVP chain length on the molecular dynamics, chain flexibility and stretching of PEG molecules in PVP-PEG mixtures were explored from the comparative values of dielectric relaxation time. Further, relaxation time values in dioxane and benzene solvent confirm the viscosity independent molecular dynamics in PVP-EA mixtures but the values vary significantly with the non-polar solvent environment.     

Wait-and-switch stochastic model of the non-Debye relaxation. Derivation of the Burr survival probability

Stochastic mechanism of relaxation, in which a dipole waits until a favourable condition for reorientation exists, is discussed. Assuming that an imposed direction of a dipole moment may be changed when a migrating defect reaches the dipole, we present a mathematically rigorous scheme relating the local random characteristics of a macroscopic system to its effective relaxation behaviour. We derive a relaxation function (the Burr survival probability) that is characterized by the stretched exponential or the power-law behaviour.     

动态模糊随机信息处理的数学方法

本文系统地概述了我们近年来提出的动态模糊随机信息处理的数学方法,内容包括模糊随机变量、模糊随机过程和模糊随机微分方程的基本解法等方面的基本概念、基本定义和某些重要的定理,以及动态系统的模糊随机响应与可靠性分析的方法等。这些方法是为我们研究工程实际问题的需要逐步发展起来的,对于处理某些类型的问题简便实用。     

Analysis of Radiation Phenomena in a Wedge Ended Dielectric Slab Waveguide

Radiation phenomena observed in a wedge shape ended dielectric slab waveguide are analyzed using mode matching technique. The case of transverse electric polarization (TE) being parallel to dielectric slab waveguide is assumed. In order to describe the fields in the wedge region, a stack of dielectric plates is assumed and in each layer the fields are expanded in terms of the mixed spectrum of guided and radiated modes. A similar expansion is used in the constant thickness slab waveguide while in free space medium a continuous-radiation mode expansion is used. Then a mode matching approach is applied, incorporating the orthogonality properties of mixed spectrum modes, in order to compute the wave fields inside the dielectric slab waveguide and wedge medium. Mode matching is achieved by discretizing the continuous radiation mode spectrum leading into a numerically stable solution provided a sufficient large number of points are used to convert integrals into finite summations. Numerical computations are carried out for various wedge geometries and shapes including linear and exponential profiles.     

介质光波导的数值计算及近似方法

综述介质光波导中模式分析方法的最新进展。着重分析严格的数值分析方法及近似方法最近的研究进展。依据方法的计算精确度、计算效率和计算复杂度等因素．对有限元法和有限差分法这两种数值分析方法以及有效指数法和频谱指数法等近似方法进行讨论。论述磁光波导的分析方法。     

Effects of barium on the nonlinear electrical characteristics and dielectric properties of SnO2-based varistors

The effects of barium on electrical and dielectric properties of the SnO_2·Co_2O_3·Ta_2O_5 varistor system sintered at 1250℃ for 60min were investigated. It is found that barium significantly improves the nonlinear properties. The breakdown electrical field increases from 378.0 to 2834.5V/mm, relative dielectric constant (at 1kHz) falls from 1206 to 161 and the resistivity (at 1kHz) rises from 60.3 to 1146.5kΩ·cm with an increase of BaCO_3 concentration from 0mol% to 1.00mol%. The sample with 1.00mol% barium has the best nonlinear electrical property and the highest nonlinear coefficient (α=29.2). A modified defect barrier model is introduced to illustrate the grain-boundary barrier formation of barium-doped SnO_{2}-based varistors.     

Dynamics of Random One-Dimensional ±J Systems

Finite chains of a two-state random Potts spin model with periodic boundary conditions are studied within Glauber dynamics. The spin exchange is assumed random with frustration between ferro and antiferromagnetic values (±J). Time-dependent fluctuations are induced by periodic temperature oscillations. Master type differential equations for spin correlation functions are solved within linear response theory. The spectrum of relaxation times are calculated at different temperatures. The ±J Potts glass chains undergo a zero temperature phase transition. The barriers against inversion of the spin chain take only two values; 0 and 2|J|. The temperature behaviour of specific heat is characterized by rounded peaks. The frequency dependence displays two plateaus for the real part of specific heat and two corresponding peaks for the imaginary part. The dynamic specific heat is not affected by the longest relaxing mode like susceptibility. The time separation of the modes is demonstrated by the Cole-Cole plots.     

Synthesis and characterization of novel polyimides with 2,2‐bis[4(4‐aminophenoxy)phenyl]phthalein‐3′,5′‐bis(trifluoromethyl)anilide

2,2‐Bis[4(4‐aminophenoxy)phenyl]phthalein‐3′,5′‐bis(trifluoromethyl)anilide (6FADAP), containing fluorine and phthalimide moieties, was synthesized via the Williamson ether condensation reaction from 1‐chloro‐4‐nitrobenzene and phenolphthalein‐3′,5′‐bis(trifluoromethyl)anilide, which was followed by hydrogenation. Monomers such as 2,2‐bis[4(4‐aminophenoxy)phenyl]phthalein‐anilide containing phthalimide groups and 2,2‐bis[4(4‐aminophenoxy)phenyl]phthalein containing only phthalein moieties were also synthesized for comparison. The monomers were first characterized by Fourier transform infrared (FTIR), ¹H NMR, ¹⁹F NMR, elemental analysis, and titration and were then used to prepare polyimides with 2,2‐bis(3,4‐dicarboxyphenyl)hexafluoropropane dianhydride. The polyimides were designed to have molecular weights of 20,000 g/mol via off‐stoichiometry and were characterized by FTIR, NMR, gel permeation chromatography (GPC), differential scanning calorimetry, and thermogravimetric analysis. Their solubility, water absorption, dielectric constant, and refractive index were also evaluated. The polyimides prepared with 6FADAP, containing fluorine and phthalimide moieties, had excellent solubility in N‐methylpyrrolidinone, N,N‐dimethylacetamide, tetrahydrofuran, CHCl₃, tetrachloroethane, and acetone, and GPC analysis showed a molecular weight of 18,700 g/mol. The polyimides also exhibited a high glass‐transition temperature (290 °C), good thermal stability (～500 °C in air), low water absorption (1.9 wt %), a low dielectric constant (2.81), a low refractive index, and low birefringence (0.0041). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3361–3374, 2003     

Structural and electrical properties of crystalline (1−x)Ta2O5−xTiO2 thin films fabricated by metalorganic decomposition

Polycrystalline (1−x)Ta₂O₅−xTiO₂ thin films were formed on Si by metalorganic decomposition (MOD) and annealed at various temperatures. As-deposited films were in the amorphous state and were completely transformed to crystalline after annealing above 600 °C. During crystallization, a thin interfacial SiO₂ layer was formed at the (1−x)Ta₂O₅−xTiO₂/Si interface. Thin films with 0.92Ta₂O₅–0.08TiO₂ composition exhibited superior insulating properties. The measured dielectric constant and dissipation factor at 1 MHz were 9 and 0.015, respectively, for films annealed at 900 °C. The interface trap density was 2.5×10¹¹ cm⁻² eV⁻¹, and flatband voltage was −0.38 V. A charge storage density of 22.8 fC/μm² was obtained at an applied electric field of 3 MV/cm. The leakage current density was lower than 4×10⁻⁹ A/cm² up to an applied electric field of 6 MV/cm.