WS2 超细粉体的固相法合成

WS2 超细粉体的固相法合成;WS2;固相反应;过硫系数;高能球磨;粒度     

海螵蛸入药部分和废弃部分8种无机元素分析

为合理开发利用海螵蛸 ,用原子吸收分光光度法测定了海螵蛸中入药部分和废弃部分中8种人体必需无机元素含量。结果表明 ,入药部分和废弃部分中钙含量丰富 ,分别达到 742 1 3× 1 0 - 3和 65 9 76× 1 0 - 3。入药部分铜、铁含量较废弃部分高 ,分别为 9 41× 1 0 - 6 、 91 86× 1 0 - 6 和2 3 5× 1 0 - 6 、 2 5 7× 1 0 - 6 。废弃部分含锌丰富 ,为 3 5 3 62× 1 0 - 6 ,数倍于入药部分 64 65× 1 0 - 6 。可见海螵蛸入药部分和废弃部分均具有良好的开发前景     

Rational synthesis of covalently bonded organic-inorganic hybrids

Hybrid materials based on covalently linked inorganic polyoxometalates (POMs) and organic species containing a delocalized pi system have drawn increasing attention. These hybrids, traditionally prepared by cluster assembly approaches that lack predictability and controllability, can now be synthesized through common organic reactions by using organically functionalized POM clusters as building blocks. This minireview highlights some of the most recent advances on a particular type of hybrids where the organic and inorganic components are connected by an imido linkage.     

Synthesis and structure of anhydrodimers of salicylaldehydes

Anhydrodimers have been synthesized by reactions of salicylaldehyde and 3,5-di-tert-butylsalicylaldehyde with SOCl₂ or PCl₅. A mechanism of condensation has been proposed, and the molecular structure of dibenzo-2,6,9-trioxabicyclo[3.3.1]nona-3,7-diene has been determined by X-ray structural analysis.Deceased.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1549–1551, August, 1995.The work was supported by the Russian Foundation for Basic Research (Project No. 94-03-08653).     

核磁共振法测定高聚物的结构—核磁共振二维谱

介绍了核磁共振(NMR)波谱,尤其是核磁共振二维谱(2D NMR)在最近几年内的进展。内容包括怎样用NMR测定高聚物的序列分布、共聚物结构、聚合物的混溶性、聚合物液晶的取向度、分子量、短链度和长链支化度、凝聚态高聚物的多相结构等。     

Ni-SDC固体氧化物燃料电池阳极的合成和性质

采用柠檬酸-硝酸盐溶胶-凝胶低温自蔓延燃烧法制备氧化镍（NiO）粉末和Ce0.8Sm0.2O1.9（SDC）粉末，并将NiO与SDC按不同质量比和不同制备工艺制备了固体氧化物燃料电池（SOFC）的阳极前身。再用自组装的还原装置将其在820℃经2．5h还原后，采用四端子法测量其电导率值。分析了阳极片电导率与阳极片微结构、Ni的质量百分数、混合研磨时间及烧结温度之间的关系。结果显示，阳极片的电导率强烈依赖于镍含量和制备工艺。     

立方介孔相含钇氧化硅的合成与表征

以低浓度的十六烷基三甲基溴化铵为结构导向剂,在碱性条件下通过水热法合成了具有立方结构的含钇Y MCM 48介孔分子筛材料。XRD测试表明当Y/Si<0.05时可以获得典型的长程有序介孔立方结构相,随Y/Si比的增加,晶胞参数的增大和红外吸收光谱(FTIR)的变化为Y进入介孔分子筛骨架中提供了有力证据。N2吸附-脱附实验给出这种立方介孔材料的BET表面积为1180m2·g-1,BJH平均孔径为3.4nm。紫外 可见漫反射光谱(UV vis)证明钇以一种六配位的形式存在。X射线光电子能谱(XPS)进一步证明钇以三价形式存在于立方介孔分子筛骨架中。     

Synthesis and Structure of Ag_3PSe_4

The title compound Ag3PSe4 was synthesized by the reaction of Ag powder,P2Se5 and Se in a molar ratio of 1:1:1 at 500℃ and structurally characterized by X-ray crystallography.The crystal belongs to orthorhombic,space group Pmn21 with cell parameters:a=7.689(4),b=6.660(3),c=6.379(4)A,V=326.7(3)A^3,Z=2,Dc=6.816g/cm^3,Mr=670.42,F(000)=584,μ=31.302mm^-1,R=0.0606,wR=0.1289 and S=1.012,The 3-D structure can be regarded as constructed from the stacking of puckered Ag-P-Se honeycomb-like sheets along the c direction,in which the Ag,P and Se atoms are bonded to each other to form a chair-like six-membered ring,and the rings then build the sheets by sharing edges.     

Influence of thermal and thermo-mechanical treatment

Two lipids with similar melting ranges but of different composition were analyzed using differential scanning calorimetry and X-ray diffraction. The lipids were processed via extrusion or were tempered at different temperatures; they were analyzed directly after extrusion and after storage at 40°C. Precirol ATO 5® showed high sensitivity to storage time and varied temperature exposure. Extrusion showed only marginal influences on the solid state. Melting peaks were narrower and shifted to higher temperatures in comparison to the untreated powder. Dynasan 114® was more robust, changes in the solid state could only be shown for samples treated above the melting range. Thus, Dynasan 114® is more appropriate for solid lipid extrusion of pharmaceutical products.     

长余辉发光玻璃SrAl2O4∶Dy, Eu的制备与发光性能研究

在低熔点破璃中掺杂一定量的长余辉发光粉制备了性能优良的长余辉发光玻璃。在保证发光玻璃均匀透明的基础上，发光性能随发光粉掺杂量的增加而增强，尽量降低假烧温度和减少保温时间可以保持良好的发光性能，在还原气氛制备的发光玻璃性能优于在空气中制备的。煅烧工艺对发光玻璃的微观结构有显著的影响。