旋转铂盘电极上Cu(phen)_2~(2 )与6-巯基嘌呤的相互作用

在Tris-NaC1*(pH=7.2)缓冲溶液中,应用循环伏安法,微分脉冲伏安法、旋转圆盘电极实验、交流阻抗法及其数据模拟等技术研究了Cu(phen)2 25(phcn=1.10-邻菲咯啉)与6-巯基嘌呤(6-MP)的相互作用.结果显示.Cu(phen)2 2MP与6-MP无论在扩散控制过程或电化学控制过程都发生了相互作用.Cu(phen)2 2及其与6-MP的作用产物于铂电极上均呈现一对氧化还原峰,但后者呈现的氧化还原峰负移.峰电流减小.交流阻抗结果显示,无论6-MP存在与否,Cu(phen)2 2在交流阻抗谱上均呈现两个清晰的电容弧,但当6-MP存在时,电化学反应电阻和电化学吸脱附电阻均增大.Cu(phen)2 2在不同转速下的阻抗拟合结果显示.随转速增大.电化学反应电阻和电化学吸脱附电阻均减小.双电层电容呈增大趋势,而吸脱附电容呈减小趋势:当6-MP存在时.仍然呈现此变化规律.     

An example of applications of the elementary catastrophe theory in Hamiltonian systems

The convection in atmosphere discussed in ref. [1] is rigorously treated by considering the variation of environmental temperature with the height. This represents an example of applications of the elementary catastrophe theory in Hamiltonian systems.     

Electrical and photoelectrical studies of plasma polymerized acrylonitrile

The electrical and photoelectrical properties of plasma polymerized acrylonitrile (PAN) are reported. The polymer films were studied in silver-PAN-silver systems. Electrical conductivity at room temperature was of the order of 10⁻¹¹ ohm⁻¹ cm⁻¹. The space charge limited current (SCLC) studies at room temperature and thermally stimulated current studies (TSC) over a temperature range of 290–500°K led to a clear understanding of carrier concentration, carrier mobility, trapping levels and activation energies. Photoelectric measurements were used to draw a band picture in plasma depositedPAN.     

结晶PET驻极体的分子运动与陷阱性质

半晶性的聚对苯二甲酸乙二醇酯(PET)存在不同尺寸运动单元的多重形式的分子运动,而且PET等高聚物前结构欠序、晶界和杂质等缺陷还使电子价带与导带间的禁带中出现局域能级(陷阱),并成为捕获载流子的中心,从而影响载流子的输运性质。分子运动和陷阱     

Role of Hydrodynamic Conditions in the Distribution of Anodic Dissolution Rates in Cavity Etching Regions during Electrochemical Micromachining of Partially Insulated Surfaces

Experimental study of the distribution of local rates of electrochemical micromachining in the presence of photoresist masks in various hydrodynamic conditions (macroscopically nonuniform rotating disk electrode, sprayer flow, an electrode placed into a cell with chaotic bulk electrolyte mixing) shows that the maximum etching localization is achieved at the control of the dissolution rate by the mass transport rate (at achieving the anodic limiting current). The localization enhancement as compared to the primary current distribution takes place in the case of a turbulent flow at hydrodynamic conditions where the removal of dissolution products from the undercutting region is hindered. These conditions (electrochemical reaction limited by the ion mass transport rate, high resistance to the mass transport in the undercutting region) are necessary for the localization enhancement using a pulsed anodic–cathodic treatment.     

Synthesis and conformational analysis of naphth[1′,2′:5,6][1,3]oxazino[3,2-c][1,3]benzoxazine and naphth[1′,2′:5,6][1,3]oxazino[3,4-c][1,3]benzoxazine derivatives

A new functional group, the hydroxy group, was inserted into a Betti base by reaction with salicylaldehyde, and the naphthoxazine derivatives thus obtained were converted by ring-closure reactions with formaldehyde, acetaldehyde, propionaldehyde or phosgene to the corresponding naphth[1′2′:5,6][1,3]oxazino[3,2-c][1,3]benzoxazine derivatives. Further, the conformational analysis of these polycyclic compounds by NMR spectroscopy and an accompanying molecular modelling are reported; especially, both quantitative anisotropic ring current effects of the aromatic moieties in these compounds and steric substituent effects were employed to determine the stereochemistry of the naphthoxazinobenzoxazine derivatives.     

Resolving the copper interference effect on the stripping chronopotentiometric response of lead(II) obtained at bismuth film screen-printed electrode

As copper(II) is a common ion in a variety of analytical samples, its effect on the stripping response of lead(II) at bismuth film screen-printed carbon electrode (BFSPCE) was investigated. The study was conducted using a screen-printed three-electrode system (working, counter and reference electrodes), with the carbon-working electrode plated in situ with bismuth film. Copper present at significant concentration level in samples was found to affect the sensitivity of the electrode by reducing the constant current stripping chronopotentiometric (CCSCP) response of lead(II). Recovery of the lead stripping response at the BFSPCE in the presence of copper was obtained when 0.1 mM ferricyanide was added to the test solution. The ferricyanide added circumvents the detrimental effect of copper(II) by selectively masking the copper ions by forming a complex. The analytical utility of the procedure is illustrated by the stripping chronopotentiometric determinations of lead(II) in soil extracts.     

Differences in the electrorheological response of a particle suspension under direct current and alternating current electric fields

We have observed an unusual reduction of shear stress with increasing shear rate under direct current electric fields, for an electrorheological fluid composed of sulfonated poly(styrene-co-divinylbenzene) particles dispersed in silicone oil. At all shear rates, the shear stress under the electric field is larger than that in the absence of the field, indicating that there is still some field-induced agglomeration of the particles. In contrast, the behavior under alternating current electric fields is the Bingham-fluid-type response commonly observed with electrorheological fluids. It is suggested that the conventional dipole–dipole interaction approach based on simplified microstructural models would be unable to explain these phenomena. Received: 27 November 2000 Accepted: 22 May 2001     

TS和PTS单晶体的热刺激电流

测定了双(对甲基磺酸)2,4-己二炔-1,6-二醇酯(TS)及其不同聚合程度TS-PTS混合体和完全聚合的聚合物PTS在100-300K温度范围内的热刺激电流。在沿分子堆砌方向上(对PTS则是大分子链方向)上观察到了它们的热刺激电流,并在相应于它们相变152K和192K处呈现热刺激电流峰。研究了聚合程度对相变的影响,绘制了TS-PTS体系的相图。对另三个热刺激电流峰的归属作了定性解释。     

The structure and electrochemical characteristics of La0.67Mg0.33 (Ni0.8Co0.1Mn0.1) x (x=2.5–5.0) multiphase alloys for nickel-metal hydride batteries

This paper presents results concerning structure and electrochemical characteristics of the La_0.67Mg_0.33 (Ni_0.8Co_0.1Mn_0.1) _x (x=2.5–5.0) alloy. It can be found from the result of the Rietveld analyses that the structures of the alloys change obviously with increasing x from 2.5 to 5.0. The main phase of the alloys with x=2.5–3.5 is LaMg₂Ni₉ phase with a PuNi₃-type rhombohedral structure, but the main phase of the alloys with x=4.0–5.0 is LaNi₅phase with a CaCu₅-type hexagonal structure. Furthermore, the phase ratio, lattice parameter and cell volume of the LaMg₂Ni₉phase and the LaNi₅ phase change with increasing x. The electrochemical studies show that the maximum discharge capacity increases from 214.7 mAh/g (x=2.5) to 391.1 mAh/g (x=3.5) and then decreases to 238.5 mAh/g (x=5.0). As the discharge current density is 1,200 mA/g, the high rate dischargeability (HRD) increases from 51.1% (x=2.5) to 83.7% (x=3.5) and then decreases to 71.6% (x=5.0). Moreover, the exchange current density (I ₀) of the alloy electrodes first increases and then decrease with increasing x from 2.5 to 5.0, which is consistent with the variation of the HRD. The cell volume reduces with increasing x in the alloys, which is detrimental to hydrogen diffusion and accordingly decreases the low-temperature dischargeability of the alloy electrodes.