Quantification of morusin using LC–MS in rat plasma: Application to a pharmacokinetic study

A sensitive LC–MS method was developed for the quantification of morusin in rat plasma using praeruptorin C as internal standard. After extraction with diethyl ether, post‐treatment samples were chromatographed on a Hypersil C₁₈ column. An isocratic mobile phase consisting of methanol–water (70:30, v /v) was applied at a flow rate of 0.4 mL/min. Detection was performed via electrospray ionization source with positive ion mode using selected ion monitoring mode at m/z 443.1 for morusin and m/z 451.0 for IS. Acceptable linearity (r ² ≥ 0.99) was observed over the concentration range of 1.5–800 ng/mL. This method was successfully applied in the pharmacokinetics study of morusin in rats.     

Development and validation of a UPLC‐MS/MS method for the determination of cucurbitacin B in rat plasma and application to a pharmacokinetic study

Cucurbitacin B (CuB), one of the most abundant forms of cucurbitacins, is a promising natural anticancer drug candidate. Although the anticancer activity of CuB has been well demonstrated, information regarding the pharmacokinetics is limited. A rapid, selective and sensitive UPLC‐MS/MS for CuB was developed and validated using hemslecin A (HeA) as internal standard (IS). Plasma samples were pre‐treated by liquid–liquid extraction with dichloromethane. Separation was achieved on a reversed‐phase C₁₈ column (50 × 4.6 mm, 5 µm) at 35°C using isocratic elution with water–methanol (25:75, v/v) at a flow rate of 0.3 mL/min. The analytes were monitored by a triple quadrupole tandem mass spectrometer with positive electrospray ionization mode. The calibration curve was linear (r > 0.995) in a concentration range of 0.3–100 ng/mL with a limit of quantification of 0.3 ng/mL. Intra‐ and inter‐day accuracy and precision were validated by percentage relative error and relative standard deviation, respectively, which were both lower than the limit of 15%. This assay was successfully applied to a pharmacokinetic study of CuB in Wistar rats. Copyright © 2015 John Wiley & Sons, Ltd.     

LC‐MS/MS determination of 1‐O‐acetylbritannilactone in rat plasma and its application to a preclinical pharmacokinetic study

A novel, rapid and sensitive LC‐MS/MS method for the determination of 1‐O‐Acetylbritannilactone (ABL), a sesquiterpene lactone abundant in Inula britannica, was developed and validated using heteroclitin D as internal standard. Separation was achieved on a reversed phase Hypersil Gold C₁₈ column (50 × 4.6 mm, i.d., 3.0 µm) using isocratic elution with methanol–5 mM ammonium acetate buffer aqueous solution (80:20, v/v) at a flow rate of 0.4 mL/min. Calibration curve was linear (r > 0.99) in a concentration range of 1.60–800 ng/mL with the lower limit of quantification of 1.60 ng/mL. Intra‐ and inter‐day accuracy and precision were validated by relative error (RE) and relative standard deviation (RSD) values, respectively, which were both less than ±15%. The validated method has been successfully applied to a pharmacokinetic study of ABL in rats. The elimination half‐lives were 0.412 ± 0.068, 0.415 ± 0.092 and 0.453 ± 0.071 h after a single intravenous administration of 0.14, 0.42, and 1.26 mg/kg ABL, respectively. The area under the plasma concentration–time curve from time zero to the last quantifiable time point and from time zero to infinity and the plasma concentrations at 2 min were linearly related to the doses tested. Copyright © 2015 John Wiley & Sons, Ltd.     

卤化钙钛矿太阳能电池材料理论研究进展

卤化钙钛矿由于具有低成本、高效率等特点,最近作为非常有前景的太阳能电池吸收层材料被广泛研究。卤化钙钛矿型太阳能电池效率在短短的几年间由3.8%(2009年)迅速增加到22.1%(2016年)。卤化钙钛矿型太阳能电池的出现彻底改变了太阳能电池领域,不仅因为它们快速增长的效率,而且因为它们在材料生长和结构方面的可控性。卤化钙钛矿型太阳能电池的优越性能说明卤化钙钛矿材料具有独特的物理性质。在本综述中,我们总结了卤化钙钛矿材料最近几年在结构、电学、光学方面的理论研究成果,这些都与它们在太阳能电池方面的应用密切相关。我们也将探讨一些卤化钙钛矿型太阳能电池目前遇到的挑战以及可能的理论解决途径。     

Thermal,Raman and dielectric study of 0.5K0.5Bi0.5TiO3–0.5PbTiO3 ceramics

The 0.5K_0.5Bi_0.5TiO₃–0.5PbTiO₃ ceramics were prepared by following a standard solid-state method. The Raman, thermal and dielectric properties of these ceramics were investigated. The X-ray measurements showed that samples have single perovskite-type structure with tetragonal symmetry. Dielectric study revealed that the dielectric behaviour of the investigated ceramics is rather of normal ferroelectrics with large thermal hysteresis. The transition temperature observed by means of differential scanning calorimetry measurements is in good agreement with that obtained from dielectric study.     

Organotin(IV) Complexes of 2-[(2′,4′,6′- Trichlorophenylamido)]benzoic Acid: Synthesis,Coordination Chemistry,and Semi-Empirical Study

A new series of organotin(IV) complexes of aniline derivatives, R₂SnL₂ and R₃SnL [where R = Me, n-Bu, n-Oct, and Ph], have been synthesized by the reaction of ligand acid with respective organotin halides in the presence of triethylamine as base or dioctyltin oxide using a Dean–Stark trap for the removal of water under reflux conditions. Experimental details for the preparation and characterization, including elemental analysis, IR, semi-empirical study, multinuclear NMR (¹H, ¹³C, and ¹¹⁹Sn spectra and EI mass spectral studies) of all reported complexes are provided. The IR data indicate that in both di- and triorganotin(IV) carboxylates, the ligand moiety ?COO acts as a bidentate group in the solid state. Multinuclear NMR data show that triorganotin complexes exhibits a four-coordinated geometry, while diorganotin(IV) complexes show a coordination number greater than four, probably five or six, in solution state.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Synthesis,Characterization, and Semi-Empirical Study of Organotin(IV) Complexes with 4-(Hydroxymethyl)piperidine-1-carbodithioic Acid: X-Ray Structure of Chlorodimethyl-(4-hydroxymethyl piperidine-1-carbodithioato-S,S′)tin(IV)

Abstract

Organotin complexes with the general formulae R₂SnL₂, R₂Sn(Cl)L, and R₃SnL have been synthesized where R = CH₃, n-C₄H₆, C₆H₅, C₆H₁₁, and L = 4-(hydroxy methyl)piperidine-1-carbodithioic acid. The newly synthesized complexes have been characterized by elemental analysis, IR, NMR (¹H, ¹³C and ¹¹⁹Sn), and, for one example, a single crystal x-ray structure. The FT-IR data shows the bidentate nature of the ligand. This coordination behavior is also confirmed by semi-empirical study. In the solid state, diorganotin complexes exhibit the penta/hexacoordinated geometry, whereas the triorganotin(IV) complexes show the five coordinated geometry. ¹¹⁹Sn NMR data reveal that triorganotin(IV) complexes exhibit the four coordinated geometry in solution, whereas the diorganotin(IV) compounds show the higher coordination, probably five or six. X-ray diffraction analysis of complex (2) shows a square pyramidal geometry around the tin atom on the basis of τ value.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.

GRAPHICAL ABSTRACT      

Kinetic Study of Radical Polymerization VIII. A Comprehensive Study of Solution Copolymerization of Vinyl Acetate and Methyl Acrylate by 1H‐NMR Spectroscopy

Radical copolymerization reaction of vinyl acetate (VA) and methyl acrylate (MA) was performed in a solution of benzene‐d₆ using benzoyl peroxide (BPO) as the initiator at 60°C. Kinetic studies of this copolymerization reaction were investigated by on‐line ¹H‐NMR spectroscopy. Individual monomer conversions vs. reaction time, which was followed by this technique, were used to calculate the overall monomer conversion, as well as the monomer mixture and the copolymer compositions as a function of time. Monomer reactivity ratios were calculated by various linear and nonlinear terminal models and also by simplified penultimate model with r _2(VA)=0 at low and medium/high conversions. Overall rate coefficient of copolymerization was calculated from the overall monomer conversion vs. time data and k _p  . k _t ^?0.5 was then estimated. It was observed that k _p  . k _t ^?0.5 increases with increasing the mole fraction of MA in the initial feed, indicating the increase in the polymerization rate with increasing MA concentration in the initial monomer mixture. The effect of mole fraction of MA in the initial monomer mixture on the drifts in the monomer mixture and copolymer compositions with reaction progress was also evaluated experimentally and theoretically.     

Cup-shaped E,E-stilbenophane: synthesis,crystal structure and supramolecular chemistry

A new E,E-stilbenophane was synthesised and characterised. The crystal structure of this cyclophane shows that this molecule has a cup-shaped structure, which hosts a phenyl ring of neighbouring molecule as guest in its cavity with a π–π distance of about 3.7 Å. Moreover, the NMR spectra and theoretical analysis (gauge-independent atomic orbitals (GIAO) and quantum theory of atoms in molecules (QTAIM)) suggest that the silver recognition by E,E-stilbenophane host molecules is based on cation–π interactions in which the π-electrons of the double bonds play a major role.     

Correlations of ion structure with multiple fragmentation pathways arising from collision‐induced dissociations of selected α‐hydroxycarboxylic acid anions

Under conditions of collision‐induced dissociation (CID), anions of α‐hydroxycarboxylic acids usually fragment to yield the distinctive hydroxycarbonyl anion (m/z 45) and/or the complementary product anion formed by neutral loss of formic acid (46 u). Further support for the known two‐step mechanism, involving an ion‐neutral complex for the formation of the hydroxycarbonyl anion from the carboxyl group, is herein provided by tandem mass spectrometric results and density functional theory computations on the glycolate, lactate and 3‐phenyllactate ions. A fourth, structurally related α‐hydroxycarboxylate ion, obtained by deprotonation of mandelic acid, showed only loss of carbon dioxide upon CID. Density functional theory computations on the mandelate ion indicated that similar energy inputs were required for a direct, phenyl‐assisted decarboxylation and a postulated novel rearrangement to a carbonate ester, which yielded the benzyl oxide ion upon loss of CO₂. Rearrangement of the glycolate ion led to expulsion of carbon monoxide, whereas the 3‐phenyllactate ion showed the loss of water and formation of the benzyl anion and the benzyl radical as competing processes. The fragmentation pathways proposed for lactate and 3‐phenyllactate are supported by isotopic labeling. The relative computed energies of saddle points and product ions for all proposed fragmentation pathways are consistent with the energies supplied during CID experiments and the observed relative intensities of product ions. The diverse reaction pathways characterized for this set of four α‐hydroxycarboxylate ions demonstrate that it is crucial to understand the effects of structural variations when attempting to predict the gas‐phase reactivity and CID spectra of carboxylate ions. Copyright © 2013 John Wiley & Sons, Ltd.