Lengthscale-dependent,elastically anisotropic,physically-based hcp crystal plasticity: Application to cold-dwell fatigue in Ti alloys

A crystal plasticity model for hcp materials is presented which is based on dislocation glide and pinning. Slip is assumed to occur on basal and prismatic systems, and dislocation pinning through the generation of geometrically necessary dislocations (GNDs). Elastic anisotropy and, through the coupling of GNDs with slip rate, physically-based lengthscale effects are included.     

Size-dependent sharp indentation—I: a closed-form expression of the indentation loading curve

In this paper, a closed-form expression of the size-dependent sharp indentation loading curve has been proposed based on dimensional analysis and the finite deformation Taylor-based nonlocal theory (TNT) of plasticity (Int. J. Plasticity 20 (2004) 831). The key issue is to link the results of FEM based on TNT plasticity with those obtained using conventional FEM by taking as the effective strain gradient, η, that presented in the work of Nix and Gao (J. Mech. Phys. Solids 46 (1998) 411), thus avoiding large-scale finite element computations using strain gradient plasticity theories. Two experiments carried out on 316 stainless-steel and pure titanium have been used to verify the effectiveness of the present analytical model; the results demonstrate that the present analytical expression of the size-dependent indentation loading curve corresponds very well to the experimental indentation loading curve. The empirical constant, α, in the Taylor model estimated from the experimental data has the correct order of magnitude. Also, the results presented in this part can be further applied to establish an analytical framework to extract the plastic properties of metallic materials with sharp indentation on a small scale where the size effect caused by geometrically necessary dislocations is significant. This will be discussed in detail in the second part of the paper.     

The impulsive response of sandwich beams: Analytical and numerical investigation of regimes of behaviour

An analytical model is developed to classify the impulsive response of sandwich beams based on the relative time-scales of core compression and the bending/stretching response of the sandwich beam. It is shown that an overlap in time scales leads to a coupled response and to the possibility of an enhanced shock resistance. Four regimes of behaviour are defined: decoupled responses with the sandwich core densifying partially or completely, and coupled responses with partial or full core densification. These regimes are marked on maps with axes chosen from the sandwich beam transverse core strength, the sandwich beam aspect ratio and the level of blast impulse. In addition to predicting the time-scales involved in the response of the sandwich beam, the analytical model is used to estimate the back face deflection, the degree of core compression and the magnitude of the support reactions. The predictions of the analytical model are compared with finite element (FE) simulations of impulsively loaded sandwich beams comprising an anisotropic foam core and elastic, ideally plastic face-sheets. The analytical and numerical predictions are in good agreement up to the end of core compression. However, the analytical model under-predicts the peak back face deflection and over-predicts the support reactions, especially for sandwich beams with high strength cores. The FE calculations are employed to construct design charts to select the optimum transverse core strength that either minimises the back face deflections or support reactions for a given sandwich beam aspect ratio or blast impulse. Typically, the value of the transverse core strength that minimises the back face deflection also minimises the support reactions. However, the optimal core strength depends on the level of blast impulse, with higher strength cores required for greater blasts.     

厚热塑性复合材料AS4/PEEK角铺设层合板的层间应力分析

将表征热塑性复合材料AS4 /PEEK非线性行为和应变速率相关行为的三维弹塑性模型通过程序加以实现。将程序计算结果和文献实验结果相比较可以发现,二者吻合较好,验证了所生成程序的有效性。计算了厚的AS4 /PEEK角铺设层合板[±25]s4在不同界面上的层间应力。由层间应力的三维分布图,分析了不同界面上层间应力的分布特征,并说明了可能引起层间分层的主要因素。     

Effect of defect energy on strain-gradient predictions of confined single-crystal plasticity

Gurtin recently proposed a strain-gradient theory for crystal plasticity in which the gradient effect originates from a defect energy that characterizes energy storage due to the presence of a net Burgers vector. Here we consider a number of different possibilities for this energy: specifically, working within a simple two-dimensional framework, we compare predictions of the theory with results of discrete-dislocation simulations of stress relaxation in thin films. Our objective is to investigate which specific defect energies are capable of capturing the size-dependent response of such systems for different crystal orientations.     

Coupling between experimental measurements and polycrystal finite element calculations for micromechanical study of metallic materials

This paper presents a methodology for multiscale coupling between the morphology and texture of a microstructure as has been characterised experimentally, and the results of mechanical strain field analysis. This methodology is based on a coupling between experimental characterisation of the microstructure, in situ and/or ex situ mechanical tests, local strain field measurements performed at the grain scale, and finite element simulations. First, with orientation imaging microscopy, a map of the microstructure is generated that can be meshed. Then, finite element calculations are carried out on this mesh, using a constitutive law which takes into account the crystallographic orientation of each grain, as has been determined by the orientation imaging itself. These numerical results are then compared to the experimental strain field as obtained by digital image correlation at the scale of the grains.     

Lipoxygenase inhibitory activity of Cuspidaria pulchra and isolated compounds

This work evaluated the in vitro inhibitory activity of the crude ethanolic extract from the aerial parts of Cuspidaria pulchra (Cham.) L.G. Lohmann against 15-lipoxygenase (15-LOX). The bioassay-guided fractionation of the n-butanol fraction, which displayed the highest activity, led to the isolation of three compounds: caffeoylcalleryanin (1), verbascoside (2) and 6-hydroxyluteolin-7-O-β-glucoside (3). Assessment of the ability of the isolated compounds to inhibit 15-LOX revealed that compounds 1, 2 and 3 exerted strong 15-LOX inhibitory activity; IC₅₀ values were 1.59, 1.76 and 2.35 μM respectively. The XTT assay showed that none of the isolated compounds seemed to be significantly toxic.