Intrinsic infrared absorption for carbon–fluorine bonding in fluorinated nanodiamond

1. Download : Download high-res image (155KB)
2. Download : Download full-size image

     

十九种长链正烷基脂肪酸的碳链骨架振动能量研究

本文通过红外光谱(FT-IR)测量数据和预测数据,计算与研究了十九种长链正烷基脂肪酸(简称脂肪酸或碳酸)的碳链骨架振动能量。结果显示出脂肪酸的碳链骨架振动能量随碳数增加呈阶梯状关系,而且脂肪酸的碳链骨架振动能量∑E出现奇偶数更迭规律。此结果可用来解释脂肪酸的熔点或熔化热呈现奇偶数更迭现象。     

Quantification of several atmospheric gases from high resolution infrared solar spectra obtained at the south pole in 1980 and 1986

Simultaneous total column amounts of a number of minor and trace atmospheric gases above the South Pole in December 1980 and December 1986 have been deduced from analysis of high resolution solar absorption spectra recorded (by F. J. M. and F. H. M.) from Amundsen-Scott South Pole Station. These spectra also contain some limited information on the vertical profiles of the observed atmospheric gases.The data sets were recorded with a Bomem Michelson-type interferometer and analyzed with a spectral least-squares fitting procedure, utilizing the best available spectroscopic line parameters and absorption cross sections. Because the same instrument, line parameters, and analysis method have been used in analyzing the December 1980 and December 1986 data sets, the precision in comparing the column amounts from these two dates is rather high, about 10–20% for the stronger absorbing gases. For this reason, it has been possible to quantify or determine upper limits for differences between the December 1980 and December 1986 total column amounts, of a number of atmospheric gases including O₃, N₂O, HNO₃, CO₂, CH₄, and CF₂C_{1 2} (CFC 12). In addition, vertical column amounts for a number of atmospheric gases covered only in the December 1986 observations have been derived, including HC1, NO, NO₂, and C₂H₆. Some of these results will be discussed here. The HC1 measurements are especially interesting since the observed amounts are higher than expected from observations made at lower latitudes in the northern and southern hemispheres.     

Thermal analytical and infrared spectroscopic investigations on polymorphic organic compounds-II

At room temperature, three of the six polymorphic compounds described are not present in their highest melting-point form, owing to enantiotropy. These three are triphenyltin chloride (3 modifications), 1-(4,4-dimethyl-2-oxo-3-tetrahydrofuryl)thiourea (4 modifications), and 2-aminoethyl diphenylborinate (3 modifications). In the case of 4-amino-1-(2-phenylethyl)-1,2,4-triazoline-5-thione, in addition to the absolutely stable modificationI, a further six unstable crystal forms have been observed. The three modifications of,-dimethyl-[1,1-biphenyl]-4-methanol are also monotropic in character. 2,9-Dimethyl-1,10-phenanthroline, the three polymorphic forms of which are unstable, is a special case, since it absorbs water from the air and changes into a semi-hydrate.     

四氯合锌酸二（正十二烷基铵）晶体相变机理的付里叶变换红外光谱研究

采用变温红外光谱研究了层结构标题配合物的固。固相变机理；相变主要与烷烃链和－ＮＨ＿３极性端基结构变化有关，主要来源于烷烃链的堆积结构和构象的有序。无序变化，同时伴有Ｎ－Ｈ…Ｃｌ氢键强度的降低，由于在高温烃链产生ＧＴＧ＋ＧＴＧ＇和临近端基的ＴＧ构象以及ＧＧ链段，链大量扭曲，形成了烷烃链的“熔化”态，发现同相和异相Ｃ－Ｃ伸缩振动频率对烷烃“链熔化”相变很敏感，可用于表征烷烃链的链长变化。     

Quantitative determination of Malathion in pesticide by modified attenuated total reflectance-Fourier transform infrared spectrometry applying genetic algorithm wavelength selection method

A simple and environment friendly method was developed for determination of Malathion content of analytical and commercial insecticide samples with no special preparation. Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectra were characterized and 1000-2000 cm⁻¹ region was selected for quantitative analysis utilizing partial least square (PLS) and two wavelength selection methods: (a) principal component regression (PCR) and (b) genetic algorithm (GA). Relative error of prediction (REP) was calculated in PLS, PCR-PLS and GA-PLS methods and was 3.536, 1.656 and 0.188, respectively. Proposed method is successfully applicable for quantification of Malathion in commercial grade samples and reliable results in comparison with known methods, confirms this idea.     

Oxidation of Methanol on Pt,Pt–Ru,and Pt–Ru–Mo Electrocatalysts Dispersed in Polyaniline: An in situ Infrared Reflectance Spectroscopy Study

The electrochemical oxidation of methanol was investigated on a Pt–Ru–Mo catalyst with an in situ infrared reflectance spectroscopy. The electrocatalysts were prepared by an electrochemical deposition and dispersed in a conducting three-dimensional matrix of polyaniline (PAni). We observed that CO₂ is produced from methanol oxidation at 350 mV vs. RHE on PAni/Pt–Ru–Mo, which is 100 mV less negative than on PAni/Pt–Ru and 200 mV less than on PAni/Pt. The results suggest that Pt–Ru–Mo is less sensitive to CO_ADS poisoning than Pt–Ru and much more sensitive than Pt. Large differences are observed concerning the average wavenumber of _ADS between Pt–Ru–Mo, Pt–Ru, and Pt.     

Spectroscopy and Structure of Sol-Gel Systems

Sol-gel derived glasses may differ from conventional melt-quenched glasses owing to the peculiar microstructures existing at the gel state, such that, even after gel densification, some differences may remain in their composition and molecular structure.This paper discusses structural characteristics of thin film oxide gels and glasses, with a special emphasis on SiO2-TiO2 based systems, which are of particular interest for sol-gel integrated optics applications. Short range structure aspects are discussed based on infrared, X-ray photoemission and X-ray photoabsorption spectroscopies. The chemical homogeneity of sol-gel materials is evaluated, based on X-ray photoemission and nuclear magnetic resonance spectroscopies, dealing in particular with the issue of homo- vs. heterocondensation. Finally, some microstructural features of sol-gel derived films are analyzed, namely the relationship between infrared absorption and porosity and the structure of nanocrystalline sol-gel films, based on grazing incidence X-ray diffraction and micro-Raman spectroscopy. The types of structural information obtainable by each different technique are compared in detail.     

Synchrotron-radiated X-ray and neutron diffraction study of native cellulose

Precise determination of d-spacings and compositional ratio of cellulose I_α and I_β in various native cellulose samples was successfully carried out by synchrotron-radiated X-ray diffraction and time-of-flight (TOF) neutron diffraction from quasi-powder specimens. X-ray diffraction peaks were separated by the deconvolution method using six types of profile function: Gaussian, Lorentzian, intermediate Lorentzian, modified Lorentzian, pseudo-Voigt, and Pearson VII. In terms of R-factors, the pseudo-Voigt function gave the best fit with the observation, and was used for determination of d-spacings. The numerical results for Valonia cellulose were: dI_α (1 0 0) = 0.613 nm; dI_β (1 1 0) = 0.603 nm; dI_β (1 1 0) = 0.535 nm; dI_α (0 1 0) = 0.529 nm; I_α content = 0.65. The differences determined between dI_α (1 0 0) and dI_β (1 1 0) and between dI_β (1 1 0) and dI_α (0 1 0) were similar to those previously reported. Comparison between unresolved peaks for the two types of cellulose samples revealed a small but definite difference between dI_α (1 1 0) and dI_β (2 0 0). The TOF neutron diffractometry using deuterated samples confirmed this difference. This revised version was published online in August 2006 with corrections to the Cover Date.     

Über Chalkogenolate. 206 [1]. N-Thioacetyldithiocarbamate und Ester der N-Thioacetyldithiocarbamidsäure

On Chalcogenolates. 206. N-Thioacetyl Dithiocarbamates and Esters of N-Thioacetyl Dithiocarbamic Acid Thioacetamide reacts with carbon disulfide in the presence of KH to form via the tetrabutyl ammonium salt dark yellow N-thioacetyl dithiocarbamates M[S₂C? NH? CS? CH₃], where M = K, Rb, Cs. The salts as well as the methyl and ethyl ester have been characterized by means of electron absorption, infrared, nuclear magnetic resonance (¹H and ¹³C), and mass spectra. Attempts to synthesize N-thioacetyl dithiocarbamic acid were not successful.