InAs/GaSb superlattice focal plane arrays for high-resolution thermal imaging

The first fully operational mid-IR (3–5 μm) 256×256 IR-FPA camera system based on a type-II InAs/GaSb short-period superlattice showing an excellent noise equivalent temperature difference below 10 mK and a very uniform performance has been realized. We report on the development and fabrication of the detecor chip, i.e., epitaxy, processing technology and electro-optical characterization of fully integrated InAs/GaSb superlattice focal plane arrays. While the superlattice design employed for the first demonstrator camera yielded a quantum efficiency around 30%, a superlattice structure grown with a thicker active layer and an optimized V/III BEP ratio during growth of the InAs layers exhibits a significant increase in quantum efficiency. Quantitative responsivity measurements reveal a quantum efficiency of about 60% for InAs/GaSb superlattice focal plane arrays after implementing this design improvement. The paper presented there appears in Infrared Photoelectronics, edited by Antoni Rogalski, Eustace L. Dereniak, Fiodor F. Sizov, Proc. SPIE Vol. 5957, 595707 (2005).     

Structural anisotropy in friction‐deposited layers of polystyrene

Friction‐deposited layers of atactic polystyrene (PS) on inert and OH‐grafted gold substrates were the subject of this study to establish a relationship between the friction process and the resulting anisotropy of the transferred polymer chains. We show, by using polarization‐modulation infrared reflection‐absorption spectroscopy that the deposited PS chains involve an anisotropy in which PS main backbone is rather perpendicular to the friction support, fact that is surprising when compared with the majority of polymers where the anisotropy is along the sliding direction. Moreover, our calculation of the orientation angles revealed that PS chains are more perpendicular in the transferred layers than in spin‐coated films. This particular anisotropy is probably due to a parallel reorientation of the phenyl ring on the friction support whatever the surface chemistry is. On the other hand, this study was useful to rectify the assignment of infrared bands unclearly reported in the literature. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3272–3281, 2006     

聚乙烯单晶的退火效应

用混合晶红外光谱法和ＳＡＸＳ、ＤＳＣ和ＬＡＭ等方法研究了聚乙烯单晶在７５℃、９０℃和１０５℃退火前后的结构变化，发现在９０℃以下和１０５℃以上退火，遵循不同的退火机制     

付里叶变换红外光谱仪的操作参数对光谱的影响

本文以二苯基甲酮的ＫＢｒ压片为标样，在Ｂｒｕｋｅｒ ＩＦＳ １２０ＨＲ付里叶变换红外光谱仪上系统考察了该仪器折一些重要操作参数（光源光栏、切趾函数、扫描速度）对光谱质量（信噪比，分辨率）的影响。从而获得了测样时的优化操作条件。     

FTS-20E富里叶红外光谱仪数据系统改造

报道了ＦＴＳ－２０Ｆ富里叶红外光谱仪数据系统改造的工作采用ＩＢＭ４８６计算机及新的数据接口取代了陈旧的ＮＯＶＡ４数据系统，文章详细描述了其硬件设计和软件编辑，改造不仅更新了ＦＴＳ－２０Ｅ里叶红外光谱仪，而且还使其达到９０年代的水平。     

Thermal Stability Of Folic Acid in the solid-state

This study attempts to identify the degradative process which folic acid undergoes in the solid-state under thermal stress. In order to facilitate the process, the various pieces of the chemical structure, namely, p-amino benzoic acid, pterin and glutamic acid as both its d- and l-isomers were investigated as separate entities. These structured solid-state pieces were then compared to the composite solid state folic acid degradative curves in order to identify the peaks seen and provide direction for the interpolation of the degradative mechanism. It was observed that none of the structural pieces could be superimposed as assumed earlier and hence an attempt was made to identify the decomposition products using various analytical techniques such as infrared spectroscopy, mass spectroscopy and X-ray diffraction which suggested that the glutamic acid fragment is lost first as evidenced by acid loss and amide enhancement in the IR spectra. The vitamin was ultimately degrading to carbon fragments and that further identification was not necessary. This revised version was published online in August 2006 with corrections to the Cover Date.     

傅立叶变换红外光谱对灰指甲组织结构的研究

对健康指甲和灰指甲的红外光谱特征吸收峰进行了指认,并对其相应官能团的吸收峰进行了对比分析.结果表明,灰指甲增厚、变脆的原因系α-角蛋白螺旋结构遭到破坏,肽链伸展并发生断裂,形成了不同化学环境的氨基酸,同时蛋白质分子的有序排列也发生了改变.     

XPS,AFM, ATR and TPD evidence for terraced,dihydrogen terminated, 1×1 (100) silicon

Heating (100) silicon at high temperature (say, higher than 850 °C) in H₂, cooling to 670–700 °C in the same ambient, and quenching to room temperature in N₂ results in environmentally robust, terraced 1 × 1 (100) SiH₂. Evidence for this conclusion is based on angle‐resolved x‐ray photoelectron spectroscopy, atomic force microscopy, infrared absorption spectroscopy in the attenuated total reflection mode, thermal programmed desorption, and reflection high‐energy electron diffraction. Copyright © 2005 John Wiley & Sons, Ltd.     

脱蜡剂DF-1的气相色谱-傅里叶变换红外光谱联用分析

脱蜡剂ＤＦ－１是一种含多种有机成分的碳氢化合物，经气相色谱－红外光谱联用分析后，确定了这些组分的组成与含量。     

Thermal decomposition and indirect structural determination of rare earth element picrates with the dtso ligand

The complexes [Ln(pic)₃(DTSO)₃] (Ln=La, Lu and Y; pic=picrate; DTSO=1,3-dithiane-1-oxide) were synthesized and characterized. Indirect structural determination by far infrared spectroscopy is presented. Results from thermal decomposition of these complexes by TG/DTG and DSC techniques are reported. This revised version was published online in August 2006 with corrections to the Cover Date.