稀土锰氧化物La0.7Ca0.3Mn1-xCuxO3低场磁电阻及电传输特性研究

采用溶胶-凝胶法制备了系列多晶CMR材料La0.7Ca0.3Mn1-xCuxO3（x=0%,1%,5%,10%,15%,20%）。在77-350 K温度范围内测量了样品的电阻率及磁电阻大小。实验结果发现：系列样品TC随掺杂量增加而递减;系列样品的电阻率峰及磁电阻峰在整个测温范围内随掺杂量的增加均依次被展宽直至消失,当掺杂量为x≥10%时,电阻率随温度的变化在整个测温范围内呈现绝缘相行为;同时还发现,掺杂量为x≥10%时,样品的磁电阻在整个测温区内基本表现为隧穿磁电阻。基于我们采用蒙特卡罗模拟方法提出的逾渗模型及隧穿磁电阻模型,对样品的磁电阻行为进行了很好的解释。对系列样品的ρ-T曲线进行lnρ-T^-（1/4）系拟合,发现掺杂量为x=10%样品在整个温区内的lnρ-T^-（1/4）系基本呈线性。     

Synthesis of Gels in the System Na2O-ZrO2-SiO2

Gels have been synthesized in the SiO₂-Na₂O-ZrO₂ system and calcined at various temperatures up to 700°C. They have been studied by infrared absorption spectroscopy. The position of the asymmetric stretching frequency of the SiO₄ unit is used as a tracer of the homogeneity. It is shown that sodium increases the solubility of zirconium in the silica matrix as already observed in fused glasses.     

Electromagnetic interference shielding and radiation absorption in thin polypyrrole films

Results of permittivity measurements, electromagnetic interference shielding effectiveness, and heat generation due to microwave absorption in conducting polymer coated textiles are reported and discussed. The intrinsically conducting polymer, polypyrrole, doped with anthraquinone-2-sulfonic acid (AQSA) or para-toluene-2-sulfonic acid (pTSA) was applied on textile substrates and the resulting materials were investigated in the frequency range 1-18 GHz. The 0.54 mm thick conducting textile/polypyrrole composites absorbed up to 49.5% of the incident 30-35 W microwave radiation. A thermography station was used to monitor the temperature of these composites during the irradiation process, where absorption was confirmed via visible heat losses. Samples with lower conductivity showed larger temperature increases caused by microwave absorption compared to samples with higher conductivity. A sample with an average sheet resistivity of 150 Ω/sq. showed a maximum temperature increase of 5.27 °C, whilst a sample with a lower resistivity (105 Ω/sq.) rose by 3.85 °C.     

FTIR-spectroscopy as a highly sensitive technique to study adsorption and desorption on ionic film and single crystal surfaces

Sample/spectrum relationships are investigated using both a low resolution rapid-scanning NIR monochromator and a Fourier transform instrument capable of high resolution and are evaluated in terms of whether or not the resolution of the instrument is sufficient for measuring the natural bandwidths corresponding to the sample. Based on the sample/spectrum relationship a criterion is developed which must be followed in order to apply either derivative spectroscopy or deconvolution to enhance the resolution of overlapped bands without generating spectral artifacts.     

Infrared dichroism measurements on the alkyl chain packing of an ionic detergent intercalated between silicate layers

 Microcrystals of the metal silicate hydrate ilerite orient macroscopically on the surface of a ATR-crystals and thus, are accessible for infrared linear dichroism measurements. We present first results which indicate that the alkyl chain packing and the orientation of the polar group of dodecyltrimethylammoniumbromide (DTAB) intercalated between silicate layers can be determined in terms of infrared order parameters. The properties of DTAB can be modulated by the relative humidity of the surrounding atmosphere and by temperature. Upon heating DTAB undergoes a phase transition from a paraffin-like solid to a fluid phase. The former is characterized by the orthorhombic perpendicular packing of the frozen alkyl chains with tilted long axes. The interactions between the ionic groups of the surfactant and that of the host matrix stabilize the lamellar arrangement of DTAB in the crystalline and in the fluid phases. Received: 14 January 1998 Accepted: 27 July 1998     

Characterization of CNS disorders and evaluation of therapy using structural and functional MRI

Modern drug development requires technologies that allow rapid translation from the preclinical to the clinical stage. It is obvious that non-invasive imaging modalities such as magnetic resonance imaging (MRI) will play a central role in this regard. This article reviews the use of structural and functional MRI readouts for characterization of central nervous system (CNS) disorders and evaluation of the efficacy of potential CNS drugs. Examples comprise dementia of Alzheimer's type, cerebral ischemia, and neuroinflammation covering both clinical and preclinical aspects. In these examples MRI has been used to obtain relevant structural information on brain atrophy, on the location and extent of ischemic brain areas, and on the number and distribution of demyelinated plaques. These structural data are complemented by readouts assessing the functional consequences associated with the pathomorphological changes. In the last decade, MRI has evolved into a standard tool for the development of CNS drugs. With regard to target-specific/molecular imaging applications MRI is limited by its inherently low sensitivity; complementary imaging modalities utilizing optical and radionuclear reporter systems will thus be required.     

仪器分析测试技术信息化教学探索与实践

针对高职学生的特点，以仪器分析测试技术课程实训教学为例，按照课前布置学习任务，学生翻转课堂学习，"教、学、做"一体化课堂教学，课后复习巩固的形式，开展信息化教学的探索与实践，并对信息化教学的效果和存在的问题进行了分析。通过信息化教学改革，仪器分析测试技术课程突破了传统教学时空的限制，激发了学生学习的兴趣，构建了"学生主体、教师主导"的教学新模式，提高了课堂教学效果，对推动高职课堂信息化教学的改革具有一定的借鉴意义。     

Determination of chloride ion in aqueous samples by isotope-dilution Fourier-transform flame infrared emission (ID-FIRE) spectrometry

An isotope dilution method for the determination of chloride ion in aqueous samples is described. The method makes use of the isotopic shift in the rotational lines of the 1–0 band of HCl emitted in the near infrared region of the spectrum by vibrationally excited HCl molecules present in a hydrogen/entrained air flame. Chloride ion in the sample is converted to chlorine gas by electrolysis and swept into a hydrogen/entrained air flame where it is converted into HCl. Because isotope dilution is an absolute method of analysis, matrix effects are minimized, and the chlorine generation step need not be quantitative. With the system described in this paper, samples must contain at least 9 mg of chloride ion per ml, and a 2-ml sample is required. Over the range from 10 to 30 mg Cl⁻ ml⁻¹, the average error was −0.96%, and the average relative standard deviation was 3.3% for seven samples using seven of the more intense lines in the P branch. Compared with standard silver nitrate titrations, the isotope dilution procedure was not affected by such common interferences as bromide ion and iodide ion. The technique was applied to several seawater samples from different regions.     

Thermogravimetric study of polyacrylamide with evolved gas analysis

Dried samples of polyacrylamide in an He atmosphere have been subjected to thermogravimetric analysis in the 30–600°C range, and the evolved gases were monitored by FTIR. Water, ammonia, and small quantities of carbon dioxide are released in the first stages of decomposition (220–340°C), where the polymer chains remain intact and the reaction occurs on the pendant amide groups. In the second stage of decomposition (340–440°C), the majority of the weight loss occurs, and main chain breakdown occurs, releasing carbon dioxide, water, nitrile compounds, and imides. Trapping of the gases in this stage and analysis by GC–FTIR and GC–MS reveals the presence of more than 20 decomposition products, and confirms that a large proportion of these can be assigned to glutarimide and its substituted analogs. Imidization and dehydration reactions on the amide groups, as well as free radical breakdown of the main chains, with inter- and intramolecular hydrogen transfer, can account for many of the products of the decomposition. © 1993 John Wiley & Sons, Inc.     

Incorporation of FT-IR spectral data in a computer-assisted prediction of globular protein structure

Currently, much effort is being directed to the determination of the three-dimensional structure of proteins. Two classes of research are of interest; spectrometric techniques which include Fourier transform infrared (FT-IR) spectrometry, and non-spectrometric prediction schemes. The spectra obtained using FT-IR spectrometry, are analyzed to determine the percentages of alpha-helices, beta-pleated sheets, and non-structured coils in a protein. Unfortunately, FT-IR, as well as other spectrometric techniques, cannot be used to determine the exact secondary structure of a protein reliably. Non-spectrometric prediction methods yield information on the exact secondary structure, but are not always accurate. Most prediction methods relate the primary amino acid sequence to the secondary structure of a protein, allowing sequential secondary structure information for the protein examined to be obtained. The goal of this research is to incorporate FT-IR with a prediction method, resulting in an improvement in the accuracy of the prediction.