Conventional processes and membrane technology for carbon dioxide removal from natural gas:A review

Membrane technology is becoming more important for CO 2 separation from natural gas in the new era due to its process simplicity,relative ease of operation and control,compact,and easy to scale up as compared with conventional processes.Conventional processes such as absorption and adsorption for CO 2 separation from natural gas are generally more energy demanding and costly for both operation and maintenance.Polymeric membranes are the current commercial membranes used for CO 2 separation from natural gas.However,polymeric membranes possess drawbacks such as low permeability and selectivity,plasticization at high temperatures,as well as insufficient thermal and chemical stability.The shortcomings of commercial polymeric membranes have motivated researchers to opt for other alternatives,especially inorganic membranes due to their higher thermal stability,good chemical resistance to solvents,high mechanical strength and long lifetime.Surface modifications can be utilized in inorganic membranes to further enhance the selectivity,permeability or catalytic activities of the membrane.This paper is to provide a comprehensive review on gas separation,comparing membrane technology with other conventional methods of recovering CO 2 from natural gas,challenges of current commercial polymeric membranes and inorganic membranes for CO 2 removal and membrane surface modification for improved selectivity.     

军用光电侦察装备的发展

本文简要介绍了军用光电侦察装备在现代军事侦察中的作用和地位,几种主要军用光电侦察装备的发展趋势,提出了应该采取的技术对策和重点研究的课题。     

Echo planar imaging of perfluorocarbons

Emulsions of perfluorotributylamine (FTBA) and perflubron were evaluated for their utility in ¹⁹F echo planar imaging. Fluorine images of the emulsions were obtained in a phantom and two mice that had been predosed. Both agents, but particularly perflubron, show potential for fluorine echo planar studies because of the long spin-spin relaxation times of the CF₃ resonances. High resolution thin slice images obtained in as little as 26.6 ms are presented.     

挤压-堆积复合法制备As2S3红外硫系玻璃光子 晶体光纤及其特性研究

在利用多极法优化设计光子晶体光纤结构的基础上, 充分结合挤压和堆积两种方法的优点, 提出了基于挤压-堆积的新型硫系光子晶体光纤制备技术, 利用As2S3硫系玻璃制备了三层孔环结构光子晶体光纤. 通过理论模拟分析得出了该光纤的色散特性和零色散点, 测试了1550nm近红外光纤激光在该光纤中的传输效果和纤芯光斑能量分布, 利用该光斑测试验证了该光纤在近红外的光能传输局部限制能力和光子晶体的光学初步控制现象.     

试论高校科技产业的管理体制与运行机制

该文在分析高校科技产业现状的基础上,提出了高校科技产业管理体制的构思与运行机制的设想.     

JAVA多线程技术在图像处理中的应用

使用JAVA多线程技术对复杂图像下载并进行处理和控制,从而达到图像显示的动态性和交互性效果,并给出了一个具体的应用实例。     

增材制造八角桁架点阵结构材料的力学行为

基于激光选区熔化增材制造技术(SLM), 以GP1不锈钢为母材, 制备4种相对密度的八角桁架点阵结构试样, 开展了准静态单轴压缩和直接撞击式霍普金森压杆实验, 并结合显式有限元计算模拟, 研究了相对密度和加载速率对八角桁架点阵结构试样在力学响应、变形模式和吸能特性的影响. 结果显示: (1)相对密度是影响八角桁架点阵结构材料力学响应的关键参数, 屈服载荷随着相对密度基本呈线性增长, 并且表现出明显的应变率强化效应; (2)在准静态压缩下, 随着相对密度增大, 八角桁架点阵结构的变形模式由弯扭屈曲模式逐渐向稳定屈服模式转变; 而在冲击压缩下, 八角桁架点阵结构的变形模式随着冲击速度由对称稳定变形模式向非对称逐渐压垮模式转变; (3)八角桁架点阵结构总吸能随着相对密度线性增大, 而比吸能随着相对密度呈现双线性变化, 在相对密度30%处出现拐折, 当相对密度高于30%后, 比吸能增大缓慢; (4)与准静态加载相比, 冲击加载下八角桁架点阵结构的总吸能和比吸能都显著提升.