配合物的生成热和配体的质子化热之间的直线焓关系——Ⅶ.Ni(Ⅱ)-2,2′-联吡啶-N-(间位取代苯基)氨基乙酸三元体系

有关Ni(Ⅱ)-N-(间位取代苯基)氨基乙酸二元体系的直线焓和直线熵关系,前文已有报道,本文报告Ni(Ⅱ)-2,2′-联吡啶-N-(间位取代苯基)氨基乙酸(Ni(Ⅱ)-biPy-m-RPhG:R=CH_3,H,CH_3O,Cl)三元体系的生成热研究,发现在此三元体系中亦存在良好的直线焓和直线熵关系。     

Chemical Reactions in the Manufacture of Waveguides for Long Distance Optical Data Transmission

One of the modern high technologies which has advanced enormously in the last few years is glass fiber technology. This is used in the manufacture of glass fibers for lighting purposes and for the optical transfer of analog and digital data with a high transfer density. The technical demands made on the glass fibers required for data transfer, the optical waveguides, are extremely high and are already fulfilled to a large extent by industry. At present about four million kilometers of fiber, worth ca. 800 million DM are produced worldwide (10% in the Federal Republic of Germany). Numerous chemical processes take place during the manufacture of optical waveguides. However, in contrast both to the high and constantly growing demands on the quality and to the increasing production volume of such fibers, little is in fact known about the reactions involved. The present article will attempt to develop a picture of the multifarious reactions occurring in the course of this technical process on the basis of literature data and our own studies.     

高聚物亚浓溶液区标度律的蒙特卡洛模拟

利用蒙特卡洛模拟方法对线形链和星形键在亚浓溶液区的标度律作了验证与讨论。我们的计算结果证明线形链渗透压Π与体积分数Φ在亚浓溶液区的标度规律是与德热纳的理论结果相一致的。同时还证明了星形链在亚浓溶液区具有与线形链相同的标度行为。     

Improved accuracy of quantitative XPS analysis using predetermined spectrometer transmission functions with UNIFIT 2004

The accuracy of quantitative XPS analysis can be improved using predetermined transmission functions. Two different calibration methods are used for estimating the transmission function T(E) of a photoelectron spectrometer, applying a survey spectra approach (SSA) and a quantified peak‐area approach (QPA) to minimize the quantification error. For the SSA method, Au, Ag and Cu spectra measured with the Metrology Spectrometer II have been used. The new QPA method was built up from Au 4f, Au 4d, Au 4p_3/2, Ag 3d, Ag 3p_3/2, Cu 3p, Cu 2p_3/2, Ge 3p and Ge 2p_3/2 standard peak areas, applying adequate ionization cross‐sections and mean free path lengths for different pass energies (10 and 50 eV), lens modes (large area, large area XL, small area 150) and x‐ray sources (Al/Mg Twin and Al Mono). In the energy range 200–1500 eV a transmission function T(E) = a₀ + b₁E (where a₀, b₁ and b₂ are variable parameters) was found to give an appropriate approximation for eight tested spectrometer settings, implementing the largest changes in the case of pass energy variations. Determination and application of the transmission functions were integrated in the XPS analysis software (UNIFIT 2004) and tested by means of an Ni90Cr10 alloy. The results demonstrate the practicability of the SSA and QPA methods, giving decreased errors of <8% in comparison with errors up to 38% obtained using Wagner's sensitivity factors. Copyright © 2005 John Wiley & Sons, Ltd.     

A subjective Bayesian approach to the theory of queues II — Inference and information in M/M/1 queues

This is a sequel to Part I of A Subjective Bayesian Approach to the Theory of Queues. The focus here is on inference and a use of Shannon's measure of information for assessing the amount of information conveyed by the various types of data from queues. The notation and terminology used here is established in Part I.     

Dynamical systems with relaxation time

We define mathematically a class of dynamical systems that exhibit relaxation corresponding to that observed in physical systems, and then show that this class is identical with the class ofK-mixing dynamical systems.     

Excess heat capacities and orientational order in systems containing hexadecane isomers of different molecular structure

Using the Picker flow microcalorimeter, excess heat capacities have been obtained at 25°C throughout the concentration range for 2,2-dimethylbutane,n-hexane, and cyclohexane each mixed with a series of hexadecane isomers of increasing degrees of orientational order, as determined by depolarized Rayleigh scattering. The isomers are 2,2,4,4,6,8,8-heptamethylnonane, 6-, 4-, and 2-methylpentadecane, andn-hexadecane. Thec _p ^E values are negative, increasing rapidly in magnitude with increase of orientational order, and are not predicted by the Prigogine—Flory theory which neglects order. Values ofc _p ^E are obtained at 10, 25, and 55°C for cyclohexane +6-, 4-, and 2-methylpentadecane which with other literature data lead to the temperature dependence of the thermodynamic excess functions for cyclohexane solutions of the five C₁₆ isomers. The excess enthalpy and entropy vary with the C₁₆ isomer and with temperature, but the corresponding variation of the excess free energy is small, indicating a high degree of enthalpy-entropy compensation. This is consistent with a rapid decrease with temperature of orientational order in the C₁₆ isomers.     

Entropy evaluation using the kinetic method: is it feasible?

The kinetic method is one of the most widely used experimental techniques for the measurement of thermochemical parameters by mass spectrometry. Recently it has been realized that it can also be used to determine reaction entropies, but the validity of this approach has not been established. This Perspective evaluates kinetic method plots in cases where there is a significant entropy difference between the competing fragmentation channels (i.e. between sample and reference compounds in the dissociating cluster ion). The concept underlying this study is to calculate mass spectra theoretically, based on known thermochemical parameters and as a function of experimental conditions. This can be done accurately using the RRKM-based MassKinetics software. The resulting mass spectra are then interpreted by the kinetic method, yielding DeltaH and DeltaS values. These values are, in turn, compared with the true values used to generate the calculated mass spectra. The results show that the reaction entropy difference between sample and reference has a very large influence on kinetic method plots. This should always be considered when studying energy-dependent mass spectra (using metastable ions or low- or high-energy collision-induced dissociation (CID)), even if only DeltaH is to be determined. Kinetic method plots are not strictly linear and this becomes a serious issue in the case of small molecules showing a large entropy effect. In such cases, results obtained at a low degree of excitation are more accurate. Energy and entropy effects can be evaluated in a relatively straightforward manner: first, the apparent Gibbs energy (DeltaG(app)) and effective temperature (T(eff)) are determined from kinetic method plots (intercept and slope, respectively), obtained from experiments using various degrees of excitation. Second, the resulting DeltaG(app) is plotted against T(eff), the slope yielding DeltaS while the intercept (extrapolation to zero temperature) yields DeltaH. This data evaluation yields more accurate results than alternative methods used in the literature. The resulting DeltaH values are fairly accurate, with errors, in most cases, <4 kJ mol(-1). On the other hand, DeltaS is systematically underestimated by 20-40%. Empirically scaling DeltaS values determined by the kinetic method by 1.35 results in a DeltaS value within 20% (or 10 J mol(-1) K(-1)) of the theoretical value.     

电子显微技术应用于生物纳米材料表征与测试的研究进展

该文简述了电子显微技术的发展历程,并介绍了现代电子显微镜的新功能。针对生物纳米材料理化性能与功能应用的特殊性,结合研究实例,重点阐述运用电子显微结构表征与原位分析测试技术指导构建新颖纳米结构、揭示材料与细胞/组织相互作用并发挥功能的机制。并在此基础上,展望了电子显微技术在生物纳米材料研究领域的发展方向(大尺寸图像拼接、三维重构、动态原位实时成像)。     

Thermodynamic characteristics of thermal dissociation of platinum tetrachloride

The pressure of thermal dissociation of platinum tetrachloride by the first step PtCl₄(s) = PtCl₃(s) + 0.5 Cl₂(g) was measured by the static method with a quartz membrane-gauge zero-pressure manometer. An approximating equation for the dissociation pressure vs. temperature was found. The enthalpy (52160±880 J mol⁻¹) and entropy (72.1±1.6 J mol⁻¹ K⁻¹) of dissociation were calculated. The heat of formation found for platinum tetrachloride (−246.3±1.3 kJ mol⁻¹) at 298.15 K agrees well with the value obtained by the calorimetric method (−245.6±1.9 kJ mol⁻¹).__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2028–2031, October, 2004.