微通道板表面发雾的AES分析

应用俄歇电子能谱对微通道板表面发雾区域进行分析。分析结果表明,发雾区碳含量比正常区高三倍。由此可推测出,发雾是由碳污染引起的,而这种碳污染很可能是残留于微通道板上的某些有机物在烧氢时碳化所致。     

Computational Modeling of Organizations Comes of Age

As they are maturing—i.e., as they are becoming validated, calibrated and refined—computational emulation models of organizations are evolving into: powerful new kinds of organizational design tools for predicting and mitigating organizational risks; and flexible new kinds of organizational theorem-provers for validating extant organization theory and developing new theory. Over the past 50 years, computational modeling and simulation have had enormous impacts on the rate of advancement of knowledge in fields like physics, chemistry and, more recently, biology; and their subsequent application has enabled whole new areas of engineering practice. In the same way, as our young discipline comes of age, computational organizational models are beginning to impact behavioral, organizational and economic science, and management consulting practice. This paper attempts to draw parallels between computational modeling in natural sciences and computational modeling of organizations as a contributor to both social science and management practice.To illustrate the lifecycle of a computational organizational model that is now relatively mature, this paper traces the evolution of the Virtual Design Team (VDT) computational modeling and simulation research project at Stanford University from its origins in 1988 to the present. It lays out the steps in the process of validating VDT as a computational emulation model of organizations to the point that VDT began to influence management practice and, subsequently, to advance organizational science. We discuss alternate research trajectories that can be taken by computational and mathematical modelers who prefer the typical natural science validation trajectory—i.e., who attempt to impact organizational science first and, perhaps subsequently, to impact management practice.The paper concludes with a discussion of the current state-of-the-art of computational modeling of organizations and some thoughts about where, and how rapidly, the field is headed.     

煤粉再燃对600 MW锅炉NOx排放的影响

在国内某台燃用褐煤的600 MW机组锅炉上进行了煤粉再燃技术示范并进行了工业试验.机组在600 MW负荷下运行时,NOx排放可控制在274 mg/m3(烟气中氧量折算到6%,下同)的水平,比改造前下降了65.36%,同时燃烧效率没有降低.进行了常规通风、空气分级和煤粉再燃三个工况下的试验,结果表明,煤粉再燃对NOx的控制效果最好,其次为空气分级.再燃煤粉比例对NOx排放也有明显的影响,在试验条件下,随着再燃燃料比例的增加,NOx排放呈降低趋势.     

COD速测仪测定工业废水中CODCr

采用标准回流法和仪器法（用ＣＯＤ速测仪）对工业废水化学需氧量进行对照测定，结果发现，用ＣＯＤ速测仪测定工业废水，简便、快速、精密度好、准确度高。     

我国经济增长与产业结构演进关系的研究——基于面板数据模型的实证分析

本文运用面板数据模型,对我国各省1996-2005年人均GDP及三次产业产值比重的关系分别进行了模型拟合,结论认为:我国经济增长对产业结构变化的影响显著,而后者对前者的影响在统计上并不显著,我国经济增长模式是需求导向型的。其次,就各次产业与人均GDP的关系看,第一产业与人均GDP呈现负相关关系,而第二、三产业与人均GDP呈现正相关关系。     

Active Inference: Applicability to Different Types of Social Organization Explained through Reference to Industrial Engineering and Quality Management

Active inference is a physics of life process theory of perception, action and learning that is applicable to natural and artificial agents. In this paper, active inference theory is related to different types of practice in social organization. Here, the term social organization is used to clarify that this paper does not encompass organization in biological systems. Rather, the paper addresses active inference in social organization that utilizes industrial engineering, quality management, and artificial intelligence alongside human intelligence. Social organization referred to in this paper can be in private companies, public institutions, other for-profit or not-for-profit organizations, and any combination of them. The relevance of active inference theory is explained in terms of variational free energy, prediction errors, generative models, and Markov blankets. Active inference theory is most relevant to the social organization of work that is highly repetitive. By contrast, there are more challenges involved in applying active inference theory for social organization of less repetitive endeavors such as one-of-a-kind projects. These challenges need to be addressed in order for active inference to provide a unifying framework for different types of social organization employing human and artificial intelligence.     

Nanoparticle enabled thermal control of ions in liquid crystals

Typically, ionic species in thermotropic liquid crystals are nearly fully ionised. Therefore, the concentration of mobile ions practically does not depend on the temperature. Interestingly, the same liquid crystals doped with nanoparticles exhibit totally different behaviour. The concentration of mobile ions become temperature dependent. This paper reports the effects of the temperature on the concentration of ions in liquid crystal nanocolloids. Liquid crystals doped with both 100% pure and contaminated nanoparticles are considered. Regardless the ionic purity of nanodopants, the concentration of mobile ions in liquid crystal nanocolloids increases towards the saturation as their temperature goes up. The magnitude of this saturation level equals the initial concentration of ions in liquid crystals doped with 100% pure nanoparticles. The temperature induced release of ions by contaminated nanoparticles in liquid crystals increases the above-mentioned saturation level. While the dispersion of 100% pure nanoparticles in liquid crystals leads to the temperature-dependent purification only, the use of contaminated nanoparticles results in the temperature-driven switching between the purification and contamination regimes enabling thermal control of ions.     

C_2H_2分解爆轰的实验研究

在长30m,公称直径(Dg)分别为50、65、80和100mm的管道内,进行了C_2H_2分解爆轰实验。用O_2—C_2H_2爆轰波引爆C_2H_2,测量了管道内的爆轰压力,及在管道端面上的反射压力。与以前认为在管径500mm管道内不会出现自持的C_2H_2分解爆轰的意见相反,在这样的管道内也发生了C_2H_2分解炸轰。在管端测到了1700kg/cm~2的异常高压,并对数次异常高压的破坏威力作了记录。     

New method for determination of trihalomethanes in exhaled breath: Applications to swimming pool and bath environments

A method for the estimation of the human intake of trihalomethanes (THMs), namely chloroform, bromodichloromethane, dibromochloromethane and bromoform, during showering and bathing is reported. The method is based on the determination of these compounds in exhaled breath that is collected by solid adsorption on Tenax using a device specifically designed for this purpose. Instrumental measurements were performed by automatic thermal desorption coupled to gas chromatography with electron capture detection. THMs in exhaled breath samples were determined during showering and swimming pool attendance. The levels of these compounds in indoor air and water were also determined as reference for interpretation of the exhaled breath results. The THM concentrations in exhaled breath of the volunteers measured before the exposure experiments showed a close correspondence with the THMs levels in indoor air where the sampler was located. Limits of detection in exhaled breath were dependent on THM analytes and experimental sites. They ranged between 170 and 710 ng m⁻³ in the swimming pool studies and between 97 and 460 ng m⁻³ in the showering studies. Application of this method to THMs determination during showering and swimming pool activities revealed statistically significant increases in THMs concentrations when comparing exhaled breath before and after exposure.