Electrokinetic characterization of hybrid NOA 81-glass microchips: Application to protein microchip electrophoresis with indirect fluorescence detection

A low-cost and straightforward hybrid NOA (Norland optical adhesive) 81-glass microchip electrophoresis device was designed and developed for protein separation using indirect fluorescence detection. This new microchip was first characterized in terms of surface charge density via electroosmotic mobility measurement and stability over time. A systematic determination of the electroosmotic mobility (μ_eo) over a wide pH range (2–10) and at various ionic strengths (20–50 mM) was developed for the first time via the neutral marker approach in an original simple frontal methodology. The evolution of μ_eo was proved consistent with the silanol and thiol functions arising from the glass and the NOA materials, respectively. The repeatability and reproducibility of the measurements on different microchips (RSD < 14%) and within 15 days (less than 5% decrease) were successfully demonstrated. The microchip was then applied for the efficient electrophoretic separation of proteins in a zonal mode coupled with indirect fluorescence detection, which is, to our knowledge, the first proof of concept of capillary zone electrophoresis in this hybrid microsystem.     

Ion chromatograph with three-dimensional printed absorbance detector for indirect ultraviolet absorbance detection of phosphate in effluent and natural waters

An ion chromatography system employing a low-cost three-dimensional printed absorbance detector for indirect ultraviolet detection towards portable phosphate analysis of environmental and industrial waters has been developed. The optical detection cell was fabricated using stereolithography three-dimensional printing of nanocomposite material. Chromatographic analysis and detection of phosphate were carried out using a CS5A 4 × 250 mm analytical column with indirect ultraviolet detection using a 255 nm light-emitting diode. Isocratic elution using a 0.6 mM potassium phthalate eluent combined with 1.44 mM sodium bicarbonate was employed at a flow rate of 0.75 mL/min. A linear calibration range of 0.5 to 30 mg/L PO₄³⁻ applicable to environmental and wastewater analysis was achieved. For retention time and peak area repeatability, relative standard deviation values were 0.68 and 4.09%, respectively. Environmental and wastewater samples were analyzed with the optimized ion chromatography platform and the results were compared to values obtained by an accredited ion chromatograph. For the analysis of environmental samples, relative errors of <14 % were achieved. Recovery analysis was also carried out on both freshwater and wastewater samples and recovery results were within the acceptable range for water analysis using standard ion chromatography methods.     

Indirectly Detected DNP-Enhanced 17O NMR Spectroscopy: Observation of Non-Protonated Near-Surface Oxygen at Naturally Abundant Silica and Silica-Alumina

Recent studies have shown that dynamic nuclear polarization (DNP) can be used to detect ¹⁷O solid-state NMR spectra of naturally abundant samples within a reasonable experimental time. Observations using indirect DNP, which relies on ¹H mediation in transferring electron hyperpolarization to ¹⁷O, are currently limited mostly to hydroxyls. Direct DNP schemes can hyperpolarize non-protonated oxygen near the radicals; however, they generally offer much lower signal enhancements. In this study, we demonstrate the detection of signals from non-protonated ¹⁷O in materials containing silicon. The sensitivity boost that made the experiment possible originates from three sources: indirect DNP excitation of ²⁹Si via protons, indirect detection of ¹⁷O through ²⁹Si nuclei using two-dimensional ²⁹Si{¹⁷O} D-HMQC, and Carr-Purcell-Meiboom-Gill refocusing of ²⁹Si magnetization during acquisition. This ²⁹Si-detected scheme enabled, for the first time, 2D ¹⁷O−²⁹Si heteronuclear correlation spectroscopy in mesoporous silica and silica-alumina surfaces at natural abundance. In contrast to the silanols showing motion-averaged ¹⁷O signals, the framework oxygens exhibit unperturbed powder patterns as unambiguous fingerprints of surface sites. Along with hydroxyl oxygens, detection of these moieties will help in gaining more atomistic-scale insights into surface chemistry.     

Indirect Oxidation of Organic Substances by Intermediates of the Oxygen Reduction

Results of two urgent and practically important directions of research on the indirect oxidation of organic compounds by highly reactive intermediates generated electrochemically from oxygen (HO₂ ^–, HO₂ ^·, HO^·) are considered and orderly arranged. The studies in question are the indirect synthesis and mineralization of organic toxicants in waste water.     

Influence of the Presence of CO2 in the Feed of an Indirect Heating TSA Process for VOC Removal

This work deals with an experimental study of an indirect temperature swing adsorption process for VOC removal from air or for gas purification. A 1 m long and 70 mm diameter column with an internal heat exchanger has been filled with Ambersorb 600 carbonaceous adsorbent. This column is equipped with sensors to measure temperature at several points inside the bed, as well as the inlet and outlet gas concentration, pressure, temperature and mass flow. In a first step, CO₂ or ethane/dry nitrogen mixtures were used to simulate a single VOC in air, with different concentrations (350 ppm, 1% and 10%). As a first results very effective gas purification was obtained and an advantage of this process is the high pollutant concentration during the regeneration phase. Experiments were performed with various ethane/CO₂ mixtures. The influence of the presence of CO₂ on the ethane concentration breakthrough curves and on the ethane concentration during regeneration is reported. The IAS theory was used, as a first approach, to predict the adsorbed pollutants amount. Relatively good prediction is obtained with a maximum error in the order of 10%. An energy balance study is reported as well.     

某些分析化学实验教材中均相沉淀概念的误区

目前,均相沉淀法在大学分析化学实验中已很少采用。高锰酸钾间接滴定法测定钙含量是大学分析化学实验中的经典实验之一,历史上存在均相沉淀法和传统沉淀法2种不同的沉淀操作。虽然我国现有大学分析化学实验中已不采用均相沉淀法进行该实验,但在某些分析化学实验教材中,却存在概念混乱的现象,即把传统沉淀法称作均相沉淀法。对这种现象进行了探讨和总结。     

Electrochemiluminescence Behavior of Ru(bpy)32+/Carbofuran System on an Electrically Heated Microelectrode Chip

An electrically heated microelectrode chip (HMEC) was designed and the Ru(bpy)₃²⁺/carbofuran electrochemiluminescence (ECL) systems were applied to characterize the performance of the HMEC. The ECL intensities increase at elevated electrode temperature, and the detection limit at 60°C (electrode surface temperature) was about 10 times lower than that at 30°C. The results indicate that new heated electrode can be handled easily and can be mass produced, the difference between the electrodes was little. The stability of the HMEC was good since the electrode surface can hardly be destroyed during detection and storage.     

Application of the semilocalized approach to chemical reactivity of butadiene

The semilocalized approach to chemical reactivity (J. Mol. Struct. (Theochem) 588 (2002) 99; Int. J. Quant. Chem. 94 (2003) 302) is applied to study the addition reaction of an electrophile or nucleophile to the butadiene molecule. In accordance with the classical concept of the reaction center and its neighborhood (substituent), only one of the two H₂C=CH-fragments of butadiene is supposed to be under a direct attack of the reagent, whereas the remaining H₂C=CH-group is assumed to play the role of the substituent and thereby to participate in the process indirectly by exerting certain electron-donating or accepting effect upon the former group and/or the reagent. The main aim of the study consists in revealing the role of the H₂C=CH-substituent in the formation of the known higher reactivity of the terminal carbon atom of the attacked C=C-bond (as compared to the internal atom) irrespective of the nature of the reagent. To this end, we seek to obtain an explicit algebraic representation of the interdependence between the direction and the extent of the total influence of the H₂C=CH-substituent, on the one hand, and the nature of the reagent, on the other hand. The expressions for electron density and bond order redistributions among separate fragments of contacting molecules derived previously in the form of power series are shown to yield the above-anticipated representation. On this basis, it is demonstrated that the electron-donating effect of the initially occupied (bonding) orbital of the substituent and the electron-accepting effect of its initially vacant (antibonding) orbital upon the remaining fragments of the whole reacting system may be considered independently whatever the nature of the reagent. However, a strong interdependence is established between the actual relative extents of these two components of the total effect of the H₂C=CH-group and the electron-donating (accepting) properties of the reagent. Moreover, this group of atoms is shown to manifest itself as an electron-donating (accepting) substituent under influence of an electrophilic (nucleophilic) attack. Using this principal result of the paper, the actual reactivity of butadiene with respect to electrophile (nucleophile) is interpreted by invoking a model system of a substituted ethene containing a simple (one-orbital) electron-donating (accepting) substituent, and a terminal addition easily follows for both types of the reagent.     

Insights into the Time Evolution of Slowly Photodegrading Contaminants

Photochemical degradation plays an important role in the attenuation of many recalcitrant pollutants in surface freshwaters. Photoinduced transformation kinetics are strongly affected by environmental conditions, where sunlight irradiance plays the main role, followed by water depth and dissolved organic carbon (DOC). Apart from poorly predictable weather-related issues, fair-weather irradiance has a seasonal trend that results in the fastest photodegradation in June and the slowest in December (at least in temperate areas of the northern hemisphere). Pollutants that have first-order photochemical lifetimes longer than a week take more than one month to achieve 95% photodegradation. Consequently, they may experience quite different irradiance conditions as their photodegradation goes on. The relevant time trend can be approximated as a series of first-order kinetic tracts, each lasting for one month. The trend considerably departs from an overall exponential decay, if degradation takes long enough to encompass seasonally varying irradiance conditions. For instance, sunlight irradiance is higher in July than in April, but increasing irradiance after April and decreasing irradiance after July ensure that pollutants emitted in either month undergo degradation with very similar time trends in the first 3–4 months after emission. If photodegradation takes longer, pollutants emitted in July experience a considerable slowdown in photoreaction kinetics as winter is approached. Therefore, if pollutants are photostable enough that their photochemical time trend evolves over different seasons, degradation acquires some peculiar features than cannot be easily predicted from a mere analysis of lifetimes in the framework of simple first-order kinetics. Such features are here highlighted with a modelling approach, taking the case of carbamazepine as the main example. This contaminant is almost totally biorecalcitrant, and it is also quite resistant to photodegradation.     

Recovery of organic acids from fermentation broths

Rising concerns over the use of fossil resources have generated renewed interest in the production of commodity chemicals via fermentation. Organic acids are a particularly attractive target because their functionality enables downstream catalytic upgrading to a variety of compounds. In this article, we survey how common technical issues are addressed in the recovery schemes for several organic acids. We present results for the recovery of acetate using a new method based on amine complexation. Our reactive separation scheme produces a high-purity product, is energy efficient, and avoids the coproduction of a waste salt coproduct, all prerequisites for a large-scale production process.