Encapsulation of Phenolphthalein pH-Indicator into a Sol-Gel Matrix

Transparent monolithic silica doping with phenolphthalein has been prepared via the acid-catalyzed sol-gel reactions of tetraethylorthosilicate in the presence of phenolphthalein. The immobilized phenolphthalein pH-indicator shows similar behavior as its solution counterpart. The UV/Vis spectra indicate that the phenolphthalein retains its structure during the sol-gel reactions in terms of response to pH. The phenolphthalein can be regarded as uniformly distributed in the silica matrix. This observation has been confirmed using polarized microscopy.     

Entrapment of pH Universal Indicator into Sol‐Gel Matrix

This study involves the behavior of universal indicator entrapped into the sol‐gel matrix. The encapsulation of universal indicator has been prepared by acid catalyzed sol‐gel reaction of tetraethylorthosilicate (TEOS) in the presence of universal indicator to produce transparent monolithic silica doping with universal indicator. The immobilized universal indicator pH‐indicator shows behavior similar to its solution counterpart. The UV/VIS spectra indicate that the universal indicator retains its structure during the sol‐gel reactions in terms of response to pH. The universal indicator can be regarded as uniformly distributed in the sol‐gel matrix. The use of SDS surfactant has positive effects on the immobilized universal indicator monolithic disk due to homogenizing the polymerizing system. This observation has been confirmed using polarized microscopy.     

Micellar Enhanced Ultrafiltration of Reactive Black 5 from Aqueous Solution by Cationic Surfactants

Reactive black 5 (RB-5) dye was removed from a water stream using two cationic surfactants, cetyltrimethylammonium bromide (CTAB) and cetylpyridinium chloride (CPC), via micellar enhanced ultrafiltration. Three membranes with different pore size were used for the determination of rejection coefficient and permeate flux of the solution at 1.5 bar trans-membrane pressure (TMP). The two surfactants (CPC and CTAB) played an almost negligible role in rejection efficiency with 5000 and 10,000 molecular weight cut-off membrane (MWCO), respectively. In this case, high rejection and low permeate flux was the result of a larger molecular size of RB-5 DYE being retained by comparatively smaller sized pores of membrane via ultrafiltration. However, CPC and CTAB surfactants showed 83% and 98% rejection coefficient, respectively, at a concentration greater than their CMC values against 30,000 MWCO. Permeate flux remained low and constant in presence of 5000 and 10,000 MWCO with a small variation against 30,000 MWCO for the two surfactants, thereby no appreciable effect on both surfactant concentrations on concentration polarization was estimated. Thus, RB-5 dye alone was determined to be responsible for membrane plugging or concentration polarization and ultimately for low permeate flux. The effect of trans-membrane pressure was also investigated during this study.     

Fast polarisation-insensitive optical shutter supported by backflow in dichroic dye-doped dual-frequency liquid crystal

This paper describes a novel implementation of a dual-frequency liquid crystal optical shutter of the guest–host type. The transmissive state of the filter is obtained by applying a low-frequency electric field that brings the dichroic dye in a homeotropic orientation. The light-absorbing state is realised by a twisted planar configuration for which the absorption is quasi-independent of the polarisation. Switching between the two states occurs in about 1 ms and the devices show no scattering for wavelengths inside or outside the absorption band of the dichroic dye. Simulations and experiments reveal how a twisted state is obtained through the backflow phenomenon.     

Elementary Photoelectronic Processes at a Porphyrin Dye/Single‐Walled TiO2 Nanotube Hetero‐interface in Dye‐Sensitized Solar Cells: A First‐Principles Study

A unique one‐dimensional (1D) sandwich single‐walled TiO₂ nanotube (STNT) is proposed as a photoanode nanomaterial with perfect morphology and large specific surface area. We have thoroughly examined the elementary photoelectronic processes occurring at the porphyrin dye/STNT hetero‐interface in dye‐sensitized solar cells (DSSCs) by theoretical simulation. It is desirable to investigate the interfacial photoelectronic processes to elucidate the electron transfer and transport mechanism in 1D STNT‐based DSSCs. We have found that the photoexcitation and interfacial charge separation mechanism can be described as follows. A ground‐state electron of the dye molecule (localized around the electron donor) is first promoted to the excited state (distributed electron donor), and then undergoes ultrafast injection into the conduction band of the STNT, leaving a hole around the oxidized dye. Significantly, the injected electron in the conduction band is transported along the STNT by means of Ti 3d orbitals, offering a unidirectional electron pathway toward the electrode for massive collection without the observation of trap states. Our study not only provides theoretical guidelines for the modification of TiO₂ nanotubes as a photoanode material, but also opens a new perspective for the development of a novel class of TiO₂ nanotubes with high power‐generation efficiency.     

Removal of Anionic Dyes from Aqueous Solution with Layered Cationic Aluminum Oxyhydroxide

It is highly desired yet challenged to find an adsorbent with low cost and excellent performance in the removal of organic dyes from aqueous solution. Here we reported that a layered cationic aluminum oxyhydroxide material hydrothermally synthesized from the low-cost source materials of AlCl₃∙6H₂O, CaO and H₂O, known as JU-111, can meet such criterion in removing methyl orange(MO) and Congo red(CR). JU-111 shows fast adsorption kinetics[especially for CR(15 s)] and high adsorption capacity(MO:>1000 mg/g; CR:>2900 mg/g), surpassing most of the reported adsorbents. Comprehensive characterizations of the adsorption process of MO and CR revealed that both adsorptions were achieved via the anion exchange process. The characteristics of extremely low cost and excellent performance render JU-111 great potential in the practical applications in the removal of anionic dyes.     

Facile synthesis and characterization of β-cobalt hydroxide/hydrohausmannite/ramsdellitee/spertiniite and tenorite/cobalt manganese oxide/manganese oxide as novel nanocomposites for efficient photocatalytic degradation of methylene blue dye

In this paper, our research team has synthesized new nanocomposites by simple precipitation/ignition method and using low-cost chemicals. Hence, β-cobalt hydroxide/hydrohausmannite/ramsdellitee/spertiniite and tenorite/cobalt manganese oxide/manganese oxide new nanocomposites were synthesized by precipitation of Mn(II)/Co(II)/Cu(II) solution using sodium hydroxide and ignition of precipitate at 700 °C for 3 hrs, respectively. The synthesized nanocomposites were characterized using different instruments such as energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), transmission electron microscope (TEM), nitrogen gas sorption analyzer, and UV–vis spectrophotometer. Energy dispersive X-ray analysis revealed that the nanocomposite formed as a result of precipitation consists of copper, cobalt, manganese, and oxygen where the weight percentages are equal to 31.73, 27.01, 17.26, and 24 %, respectively. Also, the nanocomposite formed as a result of ignition consists of copper, cobalt, manganese, and oxygen where the weight percentages are equal to 31.26, 23.87, 14.56, and 30.31 %, respectively. Transmission electron microscope revealed that the nanocomposites formed as a result of precipitation and ignition consist of polyhedral and spherical shapes with an average diameter of 34.50 and 28.56 nm, respectively. The synthesized nanocomposites were used as new photocatalysts for the efficient degradation of methylene blue dye. 0.05 g of the synthesized nanocomposites degrade 100 % of 50 mL of 15 mg/L of methylene blue dye solution within 25 min in the presence of H₂O₂ under UV light.     

Specificity of Cyanine Dye L-21 Aggregation in Solutions with Nucleic Acids

Optical spectroscopy experiments were used to study the features of cyanine dye 3,3′-dimethyl-9-(2-thienyl)-thiacarbocyanine iodide (L-21) aggregation in binary solutions DMF:Tris–HCl buffer (pH = 8) containing nucleic acids (DNA or RNA). The appearance of absorption and luminescence bands associated with J-aggregates and dimers that are formed within the minor groove of DNA has been observed. The model of L-21 J-aggregate structure is proposed. It has been found that dimers are the building blocks of L-21 J-aggregates. Disorientation in dimers caused by the minor groove curvature is reason of observation of Davydov splitting in absorption spectrum of L-21 J-aggregates. In the solution containing DNA the absorption and luminescence bands of L-21 J-aggregates exhibit the specific properties that allows the dye L-21 to be used as a fluorescent probe for DNA detection.     

非平衡溶剂化新理论在有机染料电子光谱中的应用

总结了非平衡溶剂化新理论和在量子化学软件Q-Chem中基于含时密度泛函理论(TD-DFT)实现溶剂效应下计算电子吸收和发射光谱的数值解方法.采用该方法计算了染料敏化太阳能电池(DSSCs)中三苯胺型有机染料■在真空和乙腈溶剂中的电子结构与光谱性质,研究发现,π共轭桥上碳碳双键的个数和溶剂效应会促进光电转换.     

高效液相色谱-串联质谱法测定染发剂中11种苯胺和苯酚类染料

1引言在众多染发剂产品中,人工合成的氧化型染发剂由于染色效果好、色调丰富、颜色持久等优点,应用极为广泛。但这类染发剂多以芳香胺和/或酚类组分为有效成分,易引起人体过敏等不良反应,长期使用甚至可能导致"三致"。鉴于氧化型染发剂的安全性问题,我国《化妆品卫生规范》明确规定了其禁用和暂时允许使用组分的类别及限制条件,并推荐