Fused silica capillary tube isotachophoresis using a multichannel photodiode array detector

Isotachophoresis carried out in a 0.25 mm i.d. fused-silica capillary tube yielded high resolution, compared with that in a fluorinated ethylene-propylene polymer tube. The use of an ultraviolet-visible multichannel spectrophotometer with photodiode array as detector together with a cross flow cell (volume 0.01 μl) was investigated. The system was successfully applied to the analysis of cationic dyes such as neutral red, bismarck brown, and basic fuchsine.     

The effect of the exchangeable metallic cation on the colloid properties of laponite treated with acridine orangea spectrophotometric study

The adsorption of the cationic dye acridine orange (AO) by different monoionic laponites leads to changes in the colloid properties of this synthetic mineral in aqueous solutions. The organic cation is adsorbed by the mechanism of cation exchange. Small amounts of adsorbed dye keep the clay in a peptized state with all metallic cations. Greater amounts of AO result in the neutralization of the electric charge of the clay, and its flocculation. In excess AO the charge of the clay platelets becomes positive and the clay is peptized. The colloid properties are studied by absorbance curves in which the absorbance is described as a function of the degree of saturation with constant clay concentrations or with constant dye concentrations. In the absorbance curves three regions can be identified. The transition between the first and second or the second and third regions depend on the exchangeable metallic cation initially present in the clay. The spectrophotometric method is useful in identifying the presence of tactoids and flocculation mechanism, whether it results in card-house or in book-house flocs.     

Optical sensor for carbon dioxide combining colorimetric change of a pH indicator and a reference luminescent dye

A new optical CO₂ sensor based on the luminescence intensity change of the europium(III) complex tris(thenoyltrifluoroacetonato) europium(III) dihydrate ([Eu(tta)₃]) caused by the absorption change of various pH indicators—thymol blue, phenol red, or cresol red—with CO₂ was developed and its CO₂ sensing properties were investigated. For all the CO₂ sensors using pH indicators the observed luminescence intensity from [Eu(tta)₃] at 613 nm increased with increasing CO₂ concentration. The linear calibration method based on the plot of (I₁₀₀–I₀)/(I–I₀) versus the inverse of CO₂ concentration was suggested, where I₀ and I₁₀₀ were luminescence intensities at 613 nm of the CO₂ sensor film in 100% nitrogen and 100% gaseous CO₂. In all cases the plots showed good linearity and the correlation factors of the plots, r², were 0.991 for thymol blue, 0.990 for phenol red, and 0.998 for cresol red. The slopes of the plots (A/B) for thymol blue, phenol red, and cresol red were 2.2, 5.2, and 9.0%, respectively. The response times of the CO₂ sensor film were 4.0 s for thymol blue, 4.4 s for phenol red, and 8.8 s for cresol red for switching from nitrogen to CO₂, and the recovery times of films were 36 s for thymol blue, 39.2 s for phenol red, and 56.6 s for cresol red for switching from CO₂ to nitrogen. The signal changes were fully reversible and hysteresis was not observed during the measurements. The highly sensitive CO₂ sensor was developed using thymol blue as an indicator for the CO₂-sensing probe.     

A Branched Pore Model Analysis for the Adsorption of Acid Dyes on Activated Carbon

A new branched-pore adsorption model has been developed using an external mass transfer coefficient, K _f, an effective diffusivity, D _eff, a lumped micropore diffusion rate parameter, K _b, and the fraction of macropores, f, to describe sorption kinetic data from initial adsorbent-adsorbate contact to the long-term adsorption phase. This model has been applied to an environmental pollution problem—the removal of two dyes, Acid Blue 80 (AB80) and Acid Red 114 (AR114), by sorption on activated carbon. A computer program has been used to generate theoretical concentration-time curves and the four mass transfer kinetic parameters adjusted so that the model achieves a close fit to the experimental data. The best fit values of the parameters have been determined for different initial dye concentrations and carbon masses. Since the model is specifically applicable to fixed constant values of these four parameters, a further and key application of this project is to see if single constant values of these parameters can be used to describe all the experimental concentration-time decay curves for one dye-carbon system.The error analysis and best fit approach to modeling the decay curves for both dye systems show that the correlation between experimental and theoretical data is good for the fixed values of the four fitted parameters. A significantly better fit of the model predictions is obtained when K _f, K _b and f are maintained constant but D _eff is varied. This indicates that the surface diffusivity may vary as a function of surface coverage.     

对-羟基苄叉丙二腈溶液在不同pH条件下吸收光谱的变化

在苄叉丙二腈衍生物系列中,N,N-二烷基氨基苄叉丙二腈及其类似化合物是研究和应用较多的一类。它们曾作为分子探针应用于高分子微环境特性和高分子聚合过程的研究。作为一种分子内的电荷转移络合物,它们在不同溶剂中的光谱行为也进行过研究,从而为进一步的开拓应用提供了重要依据。和前者相比,对-羟基苄叉丙二腈无论在基础研究或实际应用上都显得比较薄弱。正因如此,本工作合成了该化合物并对它进行了初步研     

油溶性偶氮染料的合成及其性能研究

随着染料在现代科技中的广泛应用,染料的油溶性也日益受到人们的重视.如:非线性光学材料、激光盘光学信息存贮材料中使用的染料、彩色成像中的油溶性影像染料等,对染料在有机溶剂中的溶解度都有很高的要求.偶氮染料是有机染料中的主要类型,但目前对其分子结构与油溶性关系的研究甚少.本文合成了一类黄色偶氮染料(见表1),并对其色光、油溶性等性能进行了测试,发现取代基相对于偶氮基的位置,是影响偶氮染料油溶性的主要因素.     

Effects of type of adsorption isotherms on parallel diffusion of sulfonated dyes into porous cellulose membrane

Transport phenomenon of three sulfonated azo dyes, C.I. Acid Red 88, C.I. Direct Yellow 12, and C.I. Direct Blue 15 into water-swollen cellulose membranes has been analyzed on the basis of parallel transport theory by surface and pore diffusion. Langmuir equation was applied into the mass balance equation to estimate dye concentration in the pores. The results were compared with the results obtained by applying Freundlich equation in our previous papers. The surface diffusivity (D _s) and the pore diffusivity (D _p) for the parallel diffusion model obtained by applying Langmuir equation agreed with those obtained by applying Freudlich equation. The theoretical concentration profiles for parallel diffusion calculated usingD _s andD _p coincided accurately with the experimental data when we applied either Langmuir or Freundlich equations.     

Photovoltaic and spectral properties of tetraphenyloporphyrin and metallotetraphenyloporphyrin dyes

Spectroscopical properties and photocurrent (or photovoltage) of tetraphenyloporphyrins and metallotetraphenyloporphyrins in nematic liquid crystal have been studied. Photoelectric response has been measured in an electrochemical cell made of the semitransparent semiconducting and golden electrodes with porphyrin dyes embedded in liquid crystal. Fluorescence, time-resolved luminescence in microsecond time scale and photoacoustic spectra have also been measured. The competition between radiative, non-radiative processes and charge transfer is discussed. It has been shown that effectivity of porphyrins for photocurrent generation depends on the presence/absence of central metal in the macrocycle of porphyrin skeleton and the kind of metal. The schematic model of the contributions of the dye molecule and semiconducting electrode in the electron transfer process is shown.     

Liquid-liquid extraction of copper (I) and copper (II) as ion-paired complexes with acyclic 2-thienyl-containing polythioether and triphenylmethane dye anion

Three acyclic polythioethers containing 2-thienyl units at both ends were synthesized and the effect of substituent on the extraction of copper(II) was studied. The methyl groups in the terminal thiophene ring have imparted an appreciable degree of increase in the percent extraction of copper(II), while the introduction of chlorine atoms into the 2-thienyl unit resulted in the reverse effect. Among the counter dye anions examined, tetrabromophenolphthalein ethylester was the best one for copper(II) extraction. The composition of extracted species was evaluated to be 122 (Cu(II)/polythioether/dye anion). Quantitative extraction of copper(I) was attained as complexes with various triphenylmethane dyes, i.e., bromocresol green, bromothymol blue, bromo-phenol blue and pyrogallol red. Copper(I) in organic phase was completely back-extracted with 2 mole/l sulfuric acid containing 10% hydrogen peroxide.     

Weighted local polynomial estimations of a non-parametric function with censoring indicators missing at random and their applications

In this paper, we consider the weighted local polynomial calibration estimation and imputation estimation of a non-parametric function when the data are right censored and the censoring indicators are missing at random, and establish the asymptotic normality of these estimators. As their applications, we derive the weighted local linear calibration estimators and imputation estimations of the conditional distribution function, the conditional density function and the conditional quantile function, and investigate the asymptotic normality of these estimators. Finally, the simulation studies are conducted to illustrate the finite sample performance of the estimators.