Synthesis and photovoltaic properties of main chain polymeric metal complexes containing 1,10‐phenanthroline metal complexes conjugating alkyl fluorene or alkoxy benzene by C═C bridge for dye‐sensitized solar cells

Four main chain polymeric metal complexes (P1–P4) based on 1,10‐phenanthroline metal complexes via the Heck coupling have been synthesized and characterized by Fourier transform infrared spectroscopy, ¹H NMR, UV–Vis absorption, photoluminescence spectroscopy, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimetry, elemental analysis, and cyclic voltammetry. To investigate their photovoltaic properties, the dye‐sensitized solar cells based on these polymers dyes are studied, under the illumination of AM 1.5G, 100 mW/cm². The study results show the four polymers exhibit good thermally stable and the solar cells based on them have good device performance, and the maximum power conversion efficiency is up to 0.735% for the solar cells based on P3 with a short‐circuit current (J_sc) of 1.68 mA/cm² and an open‐circuit voltage (V_oc) of 0.62 V. Copyright © 2012 John Wiley & Sons, Ltd.     

DYE SENSITIZED TITANIA PHOTOVOLTAIC CELLS ON FLEXIBLE SUBSTRATES—CONCEPT TO COMMERCIALIZATION

ABSTRACT

Methods have been found for sintering titania nanoparticles at low temperature, e.g., <150°C, and for rapid sensitization of the sintered particles. This discovery means that dye-sensitized, titania solar cells can be made on flexible substrates, such as poly(ethylene terephthalate), in a continuous roll-to-roll manufacturing process. The ability to produce solar cells in a continuous fashion should substantially lower the cost of the cells compared to batch processed, on-glass cells. The combined attributes of spectral sensitivity, flexibility, light weight, impact resistance and low cost should find utility a variety of handheld appliances in both indoor and outdoor situations. In its most advanced state of development, this technology would find application in off-grid power generation and thus provide the opportunity of bringing solar generated electricity to rural areas of the world.     

Unsupervised cell identification on multidimensional X‐ray fluorescence datasets

A novel approach to locate, identify and refine positions and whole areas of cell structures based on elemental contents measured by X‐ray fluorescence microscopy is introduced. It is shown that, by initializing with only a handful of prototypical cell regions, this approach can obtain consistent identification of whole cells, even when cells are overlapping, without training by explicit annotation. It is robust both to different measurements on the same sample and to different initializations. This effort provides a versatile framework to identify targeted cellular structures from datasets too complex for manual analysis, like most X‐ray fluorescence microscopy data. Possible future extensions are also discussed.     

Tailorable PC71BM Isomers: Using the Most Prevalent Electron Acceptor to Obtain High‐Performance Polymer Solar Cells

Despite being widely used as electron acceptor in polymer solar cells, commercially available PC₇₁BM (phenyl‐C₇₁‐butyric acid methyl ester) usually has a “random” composition of mixed regioisomers or stereoisomers. Here PC₇₁BM has been isolated into three typical isomers, α‐, β₁‐ and β₂‐PC₇₁BM, to establish the isomer‐dependent photovoltaic performance on changing the ternary composition of α‐, β₁‐ and β₂‐PC₇₁BM. Mixing the isomers in a ratio of α/β₁/β₂=8:1:1 resulted in the best power conversion efficiency (PCE) of 7.67 % for the polymer solar cells with PTB7:PC₇₁BM as photoactive layer (PTB7=poly[[4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl][3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl]]). The three typical PC₇₁BM isomers, even though sharing similar LUMO energy levels and light absorption, render starkly different photovoltaic performances with average‐performing PCE of 1.28–7.44 % due to diverse self‐aggregation of individual or mixed PC₇₁BM isomers in the otherwise same polymer solar cells.     

Synthesis of new di-anchoring organic sensitizer based on quinoxaline acceptor for dye-sensitized solar cells

New quinoxaline-based organic sensitizer bearing di-anchoring group for dye-sensitized solar cells (DSSCs) was synthesized from diethyl 4,5-diaminophthaltate, in which was prepared under mild condition by using Takehito’s method. The synthesized sensitizer was compared with mono-anchoring sensitizer through absorption spectra, emission spectra, J-V curve, and IPCE spectra, indicating the di-anchoring group leads to a noticeable improvement of J_sc value owing to more efficient intramolecular charge transfer and channel number increment.     

Low‐Symmetry Ω‐Shaped Zinc Phthalocyanine Sensitizers with Panchromatic Light‐Harvesting Properties for Dye‐Sensitized Solar Cells

Two low‐symmetry phthalocyanines (Pcs) substituted with thiophene units at the non‐peripheral (α) and peripheral (β) positions were synthesized and their optical, electronic‐structure, and electrochemical properties were investigated. The substitution of thiophene units at the α positions of the phthalocyanine skeleton resulted in a red shift of the Q band and significantly modified the molecular‐orbital electronic distributions just below the HOMO and just above the LUMO, with distortion of the typical Gouterman four‐orbital arrangement of MOs. Two amphiphilic Ω‐shaped ZnPcs ( αPcS1 and αPcS2 ) bearing a π‐conjugated side chain with an adsorption site at an α position of the Pc macrocycle were synthesized as sensitizers for dye‐sensitized solar cells (DSSCs). The absorption spectra of αPcS1 and αPcS2 showed red shifted Q bands and a broad band from 350 to 550 nm assignable to the intramolecular charge‐transfer transition from the ZnPc core to the side chains. Time‐dependent DFT calculations provided a clear interpretation of the effect of the thiophene conjugation on the typical phthalocyanine core π MOs. Compound αPcS1 was used as a light‐harvesting dye on a TiO₂ electrode for a DSSC, which showed a panchromatic response in the range 400–800 nm with a power conversion efficiency of 5.5 % under one‐sun conditions.     

Fluorescence Signal Enhancement Using Double Pass Cell Configurations

Abstract

A simple and reproducible method for increasing the sensitivity of fluorescence measurements by a factor of 2.0–2.5 is presented. Data are presented to explain: the deviation from the expected theoretical increase in sensitivity of 4.0; wavelength dependency and subsequent problems arising from enhanced inner filtering effects.     

Concise Synthesis and X-Ray Crystal Structure of N-Benzyl-2-(pyrimidin-4′-ylamino)-thiazole-4-carboxamide (Thiazovivin), a Small-Molecule Tool for Stem Cell Research

Stem cell research is one of the most promising fields of modern biomedical research and regenerative medicine. Limited availability and ethical concerns suggest the renouncement of embryonic stem cells (ESCs), thus raising the need for more efficient procedures for the generation of stem cells, ideally through reprogramming of mammalian cells. The small molecule N-benzyl-2-(pyrimidin-4′-ylamino)-thiazole-4-carboxamide (thiazovivin) is known to improve the generation of human induced pluripotent stem cells (iPSCs) from human fibroblasts. We herein describe a highly efficient procedure for the synthesis of thiazovivin over just five steps, which should be suitable for a large-scale application, and the first x-ray crystal structure of the target compound.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource: Full experimental and spectral details.]