Mode beating in spot-size converter lasers

An anomalous modulation in the wavelength spectrum has been observed in lasers with spot-size converters. This intensity modulation is shown to be caused by beating between the fundamental lasing mode and radiation modes in the taper. This results in a periodic modulation in the net gain spectrum, which causes wavelength jumps between adjacent net gain maxima, and a drive current dependent spectral width that is expected to affect system performance. The amplitude of this spectral modulation is reduced significantly by either using an angled rear-facet which reflects the beating radiation modes away from the laser axis, or by using a nonlinear, adiabatic taper.     

松纵坑切梢小蠹虫害的仿真模型与生态防治的优化策略

根据松纵坑切梢小蠹的主要生物学特征,通过分析抚育间伐持续控制松纵坑切梢小蠹虫害的机理,应用复杂适应系统(CA S)理论,建立了模拟松纵坑切梢小蠹虫害的一种动态演化数学模型,并讨论了模型的收敛性.然后选用昆明小哨林场为背景,进行了各种抚育间伐决策的仿真,从中优选抚育间伐决策.结果表明:模拟优化方案与实际调查统计分析结果一致:均为弱度间伐与中弱度间伐控制蠹害效果最好.最后通过森林积材量与虫害程度之间的优化,给出了抚育间伐的优化策略.     

Acoustic characterization and prediction for fan-duct-plenum-room integrations

This paper investigates mutual influence of duct and room acoustics in the whole fan-duct-plenum-room integrations. Applying the parametric design language of finite element software ANSYS (APDL), dimensional and positional influence on system acoustics has been studied. Models with different room dimensions, duct lengths, duct cross-sections, duct locations, duct discharges and duct elbow were constructed, and their characteristics were compared qualitatively. Results show that small rooms, short ducts, large duct cross-sections and bell mouth duct discharges help to increase room sound pressure levels (SPLs); SPLs in ducts and plenums are sensitive to duct dimensions and duct discharge types but insensitive to duct locations and room dimensions; duct elbows have relatively indistinct acoustic influence in each component. Based on the calculation results, a semi-experimental method was proposed for simply and approximately evaluating indoor acoustic spectra of fan-duct-plenum-room integrations, then an example was used to demonstrate the prediction process. Finally, by adopting several ideal models, sound field constitutions, duct and room wall admittances and duct end reflection were explored quantitatively. This study may give a detailed understanding of fan-duct-plenum-room acoustics for researchers, also it might provide a new, simple and approximate prediction method for professionals to evaluate and improve fan-ducted acoustics.     

Involutions for upper triangular matrix algebras

In this paper we describe completely the involutions of the first kind of the algebra UT_n(F) of n×n upper triangular matrices. Every such involution can be extended uniquely to an involution on the full matrix algebra. We describe the equivalence classes of involutions on the upper triangular matrices. There are two distinct classes for UT_n(F) when n is even and a single class in the odd case.Furthermore we consider the algebra UT₂(F) of the 2×2 upper triangular matrices over an infinite field F of characteristic different from 2. For every involution *, we describe the *-polynomial identities for this algebra. We exhibit bases of the corresponding ideals of identities with involution, and compute the Hilbert (or Poincaré) series and the codimension sequences of the respective relatively free algebras.Then we consider the *-polynomial identities for the algebra UT₃(F) over a field of characteristic zero. We describe a finite generating set of the ideal of *-identities for this algebra. These generators are quite a few, and their degrees are relatively large. It seems to us that the problem of describing the *-identities for the algebra UT_n(F) of the n×n upper triangular matrices may be much more complicated than in the case of ordinary polynomial identities.     

Integral-Type Darboux Transformations for the mKdV Hierarchy with Self-Consistent Sources

We present integral-type Darboux transformation for the mKdV hierarchy and for the mKdV hierarchy withself-consistent sources. In contrast with the normal Darboux transformation, the integral-type Darboux transformationscan offer non-auto-Backlund transformation between two (2n 1)-th mKdV equations with self-consistent sources withdifferent degrees. This kind of Darboux transformation enables us to construct the N-soliton solution for the mKdVhierarchy with self-consistent sources. We also propose the formulas for the m times repeated integral-type Darbouxtransformations for both mKdV hierarchy and mKdV hierarchy with self-consistent sources.     

An ASE Reduction Filter Using Cascaded Optical Fiber Grating Couplers in EDFA Repeater

A new configuration for an ASE reduction filter in EDFA repeaters for WDM optical transmission systems using optical fiber grating couplers (FGCs) was proposed and first demonstrated. The filtering characteristics of the proposed filter for amplified single wavelength signal and 2-channel WDM signals using EDFA were identified. It was found that the filter was effective to improve SNR in optical domain by reducing ASE noise. The required FGC characteristics for the filter were theoretically predicted under the condition that the total filter loss did not exceed 3 dB. More than 70% of drop efficiency was required in each FGC for the application of the proposed filter to an 8-channel WDM system using EDFA repeaters.     

Phase transformation of Ni-B, Ni-P diffusion barrier deposited electrolessly on Cu interconnect

In this paper, we report that the phase transformation of Ni-B, Ni-P diffusion barriers deposited electrolessly on Cu, for the reason that the Ni-P layer is a more effective diffusion barrier than the Ni-B layer. The Ni₃B crystallized was decomposed to Ni and B₂O₃ above 400 °C and the Ni₃P crystallized was decomposed to Ni and P₂O₅ above 600 °C respectively in Ar atmosphere. Also, the Ni₃B was decomposed to Ni and free B above 400 °C and the Ni₃P was decomposed to Ni and free P above 600 °C respectively in H₂ atmosphere. The decomposed Ni formed a solid solution with Cu. The Cu diffusion occurred above 400 °C for Ni-B layer and above 600 °C for Ni-P layer, respectively. Because the decomposition temperature of Ni-P layer is about 200 °C higher than that of Ni-B layer, the Ni-P layer is a more effective barrier for Cu than the Ni-B layer.     

Effect of hardness and composition gradients on Barkhausen emission in case hardened steel

The effect of gradients in hardness, structure and composition in the surface layers on magnetic Barkhausen noise (MBN) was investigated in two widely used low alloy steels. One material was case hardened by induction hardening. The other was case carburised. Similar hardness profiles were produced by the two treatments. It was found that the variation in structure and hardness through the case in the induction-hardened steel had a minor effect on the MBN profile. In contrast, the inhomogeneity in the case-carburised material showed up clearly. This took the form of a broadened or two-peak MBN profile. When the surface layer containing the case was removed by etching, the broadened profile was replaced by a profile with a single peak. It is concluded that the shape and position of the MBN profile is significantly affected when a gradient in microstructure is induced by a gradient in carbon content. On the other hand, a gradient in microstructure induced by heat treatment with a constant carbon level has much less affect on the MBN profile for the induction-hardened steel.     

Thermal decomposition of a generation 4.5 PAMAM dendrimer platinum drug conjugate

A nanoscale multivalent platinum drug based on a poly(amidoamine) [PAMAM] dendrimer (generation 4.5, carboxylate surface) has been synthesized and fully characterized using a variety of spectroscopic, chromatographic and thermal methods. Treatment of the dendrimer with an aqueous solution containing an excess diaquo(cis-1,2-diaminocyclohexane)platinum(II) produces a conjugate containing approximately forty (diaminocyclohexane)platinum(II) moieties at the surface of the dendrimer. This material undergoes smooth two-stage thermal decomposition to provide residual platinum oxide reflecting the platinum loading in the drug.     

Bubble point pressure estimates from Gibbs ensemble simulations

Bubble pressure points of ethanol–1,1,1,2,3,3,3-heptafluoropropane (HFC-227ea refrigerant) mixtures from the third Industrial Fluid Properties Simulation Challenge are computed using publicly available molecular simulation software. Several published force fields are compared against the known answers provided in the contest guidelines and the best force fields are used to make predictions for the unknown results.