基于表面等离子体共振的水质分析系统稳定性研究

根据表面等离子体共振的原理,建立了可用于长期、实时、不间断检测的水质分析系统.为了提高系统的稳定性,对表面等离子体共振传感芯片进行了改进,利用LB法在传感芯片的金属膜表面镀制了聚苯乙烯（PS）层.利用改进前后的表面等离子体共振传感芯片分别对两种样品进行了稳定性实验研究.分析经过长时间检测前后所测得的实验数据,发现改进后的水质分析系统所测得的溶液表面等离子体共振共振角的变化为改进前系统的1/10,最小反射率改变为改进前的1/30.实验证明,经过改进的水质分析系统能更适用于长期不间断的检测分析.     

《光学学报》四十周年:温故开新,不惑笃行

自1981年创刊以来,《光学学报》以发表国内优秀光学科研成果为己任,为我国光学科技人员提供了高水平、活跃的学术交流平台.《光学学报》经历了近40年的洗礼,见证了国内一代代优秀光学科研人员的成长.本文首先回顾了《光学学报》从创刊到转企、集群化发展,再到数字化出版的变革之路;其次,统计了《光学学报》历年来的出版数据、数据库...     

Development of Improved High-Performance Liquid Chromatography Method for the Determination of Residual Caprylic Acid in Formulations of Human Immunoglobulins

Quality control of human immunoglobulin formulations produced by caprylic acid precipitation necessitates a simple, rapid, and accurate method for determination of residual caprylic acid. A high-performance liquid chromatography method for that purpose was developed and validated. The method involves depletion of immunoglobulins, the major interfering components that produce high background noise, by precipitation with acetonitrile (1:1, v/v). Chromatographic analysis of caprylic acid, preserved in supernatant with no loss, was performed using a reverse-phase C18 column (2.1 × 150 mm, 3 μm) as a stationary phase and water with 0.05% TFA–acetonitrile (50:50, v/v) as a mobile phase at a flow rate of 0.2 mL/min and run time of 10 min. The developed method was successfully validated according to the ICH guidelines. The validation parameters confirmed that method was linear, accurate, precise, specific, and able to provide excellent separation of peaks corresponding to caprylic acid and the fraction of remaining immunoglobulins. Furthermore, a 2⁴⁻¹ fractional factorial design was applied in order to test the robustness of developed method. As such, the method is highly suitable for the quantification of residual caprylic acid in formulations of human immunoglobulins for therapeutic use, as demonstrated on samples produced by fractionation of convalescent anti-SARS-CoV-2 human plasma at a laboratory scale. The obtained results confirmed that the method is convenient for routine quality control.     

Effect of Ozone-Treated or Untreated Saskatoon Fruits (Amelanchier alnifolia Nutt.) Applied as an Additive on the Quality and Antioxidant Activity of Fruit Beers

Fruit of Saskatoon (Amelanchier alnifolia Nutt.) are a good source of bioactive compounds, such as polyphenols, including anthocyanins, as well as vitamins, macro- and microelements and fibre. By treating Saskatoon fruits with gaseous ozone, and adding the material as an enhancer to barley beers, it is possible to impact the contents of bioactive compounds in the produced fruit beers. Sensory tests showed that beers made from barley with addition of Saskatoon fruit of the ‘Smoky’ cultivar were characterised by the most balanced taste and aroma. Physicochemical analyses of fruit beers, produced with Saskatoon fruit pulp added on the seventh day of fermentation, showed that the beers enhanced with ozone-treated and untreated ‘Smoky’ Saskatoon fruits had the highest contents of alcohol, 5.51% v/v and 5.66% v/v, respectively, as well as total polyphenol contents of 395 mg GAE/L and 401 mg GAE/L, respectively, and higher antioxidant activity (assessed using DPPH^•, FRAP and ABTS^+• assays). It was demonstrated that the ozonation process led to a decrease in the contents of neochlorogenic acid, on average by 91.00%, and of caffeic acid by 20.62%, relative to the beers enhanced with ‘Smoky’ Saskatoon fruits not subjected to ozone treatment. The present study shows that Saskatoon fruits can be used in the production of beer, and the Canadian cultivar ‘Smoky’ is recommended for this purpose.     

腔内倍频调Q激光器中脉冲光场的时间不稳定性研究

以腔内倍频调Q激光器工作原理为基础,研究了多种形式抽运光分布的情况下倍频光的脉冲形状以及脉冲持续过程中光场分布的时间不稳定性,分析了倍频光光束质量随时间的变化规律.发现腔内倍频调Q激光器输出的倍频光光场分布在脉冲的持续过程中并不稳定,呈持续变化.对高斯型抽运的情况研究发现,减小腔长会使脉冲光场分布的不稳定性减小;而增加...     

Analysis of KrF excimer laser beam modification resulting from ablation under closed thick film flowing filtered water

The application of a closed thick film flowing filtered water to immerse the ablation etching mechanism of an excimer laser poses interesting possibilities concerning debris control, modification of machined feature topography and modification of the ablation rate. Furthermore, these parameters have been shown to be dependent on flow velocity; hence, offering further user control of machining characteristics. However, the impact of this technique requires investigation. This contribution offers comparison of the calculated ablation pressure and the effect on feature surface characteristics given for laser ablation of bisphenol A polycarbonate using KrF excimer laser radiation in ambient air against laser ablation of the same substrate under closed thick film flowing filtered water immersion. Also, an impact of such immersion equipment on the optical performance of the micromachining centre used is quantified and reviewed. The pressure is calculated to have risen by a magnitude of 48, when using the liquid immersed ablation technique. This increase in pressure is proposed to have an increased surface roughness, promoting the number of asperities with a surface area lower than 16 μm²; resulting in a diffuse reflection of light and an apparent darkening of features. The focal length of the optical system was accurately predicted to increase by 2.958 mm, when using the closed flowing liquid immersion equipment. This equipment is predicted to have increased the optical depth of focus via reduction in the angle of convergence of the two defining image rays; yet the perceived focus, measured discretely by mean feature wall angle, was found to be 25% smaller when using the closed thick film flowing filtered water immersion technique instead of similar laser ablation in ambient air. A compressed plume interaction is proposed as a contributing factor in this change.     

基于压电探测判定激光支持燃烧波和爆轰波的点燃阈值

为了获得激光支持燃烧波和爆轰波的点燃阈值,采用压电探测器检测波长为1 064 nm的Nd:YAG激光作用在铝靶表面所产生的应变和冲压。从实验结果观察到压电信号的变化分为3个阶段,分别为光热弹性应变阶段、等离子体增强耦合阶段和激光支持爆轰波对靶表面的压力阶段,并从理论上研究了这3个阶段的激光与靶材料相互作用的机理,从而可以从压电信号是否发生跃变判断出激光支持燃烧波和激光支持爆轰波的点燃阈值,与其它方法所得到结果基本吻合。     

光谱编码成像系统的数据压缩技术

利用时间拉伸显微成像系统观察并记录非重复动态随机现象,在其超高成像速度和高空间分辨率下必定会产生大量的数据。一种基于差分检测和游程编码的数据压缩方法,可以有效地解决时间拉伸成像系统的数据存储问题。差分检测可以消除连续相同的信号,只检测出相邻信号的差异,从而提高游程编码算法的有效性。实验中,采用扫描频率为77.76 MHz的时间拉伸显微成像对分辨率板、人红细胞和人乳腺癌细胞线性扫描成像。实验结果表明,数据压缩比可以达到8.47,对比分析发现经过差分检测方法可以获得更高的压缩比。另外,通过计算重建后的图像与原图的结构相似性(SSIM)值发现,经过数据压缩后高质量的图像可以被重建。     

径向剪切干涉法综合诊断光束质量研究

 为了解决高功率激光装置光束质量诊断系统的自验证问题,研究了基于空间相位调制的径向剪切干涉法综合诊断光束质量的实验应用。该方法理论上只需一台干涉仪且从单幅干涉图中获取光束的近场、相位和远场分布信息。实验结果表明,目前可以得到高分辨率的相位分布,由测量近场和相位恢复出的远场同CCD直接测量得到的远场形态相同,环围能量比曲线相当吻合,不足之处在于只能提取近场较低空间频率成分,还达不到CCD直接测量的空间分辨水平。     

竞争情形下服务商质量保证策略研究

质量保证策略是服务商获取竞争力的重要手段之一。本文在考虑服务商及其竞争对手的质量承诺水平和质量承诺补偿对其服务需求影响的基础上,构建了质量承诺水平、质量承诺补偿、质量承诺水平和质量承诺补偿三种竞争情形下的博弈模型,并系统分析了不同模型下的质量保证策略。研究发现:一旦有服务商提高质量承诺水平或质量承诺补偿,在质量承诺水平竞争模型下,其他服务商可适当地降低质量承诺水平,而在质量承诺补偿竞争模型下,其他服务商会同时提高质量承诺补偿。此外,在质量承诺水平和质量承诺补偿竞争模型下,若质量承诺水平的成本系数满足一定条件,各个服务商之间会存在纳什均衡。本文对服务市场竞争情形下服务商质量保证策略的制定具有一定的实践意义。