BrCN分子的电子碰撞离子对解离

离子对解离是一类重要的分子过程,常发生于分子被激发到超激发态. 与光激发的离子对解离实验研究不同,电子碰撞的相关过程研究尚存在实验挑战,特别是在测定其阈值方面. 本文报道了相关的利用单色化电子碰撞分子的实验研究进展. 以BrCN→Br^-+CN⁺离子对解离为例,根据CN⁺离子出现能测定其解离阈值为13.78 eV,同时在16.09 eV获得了CN⁺离子的时间切片速度影像且显示出动量分布的各向异性.     

Relaxation of a dislocation in a nanocrystallite

Experimental studies of dislocations in nanoparticles are just beginning. The corresponding theoretical models are still lacking. In this context, the author analyzes relaxation of a dislocation in a nanoparticle. Mechanistically, this process is considered to occur primarily via dislocation drift induced by the stress-related image forces. Elementary dislocation displacements include the formation of a kink at one of the sides of the dislocation line, its diffusion along this line, and annihilation at the opposite side. For this mechanism, the dependence of the time of dislocation disappearance on the nanoparticle size has been identified.     

基于机器视觉的量子点STM形貌图像识别研究

为减轻量子点表面形貌分析过程中的人工工作,使量子点的STM图像分析更加自动化,基于机器视觉对衬底的斜切角及量子点的形貌特性展开研究.利用腐蚀和边缘检测提取台阶形状,并通过反三角变换计算斜切角.利用二值化和阈值下降对量子点的数量与空间坐标进行提取,在此基础上,通过邻域密度计算分析其均匀性,并在解决图像中的粘连问题后找出量子点的尺寸.实验结果显示,与人工统计相比,斜切角、量子点计数及尺寸的平均误差分别为5.02%, 0.7788%及1.12%;并实现量子点均匀性的自动化统计与分析.基于机器视觉算法的自动识别过程,对协助研究者分析量子点表面形貌有实际意义.     

Semi-discrete breather in a helicoidal DNA double chain-model

The nonlinear dynamics of DNA molecular chain is studied for longitudinal and transversal motions through a new discrete helicoidal zigzag model with four degrees of freedom. We take into account the Stokes and hydrodynamical viscous forces. In the semi-discrete approximation, we show that the coupled nonlinear partial differential equations for the longitudinal and transversal out-of-phase motions can be reduced to the nonlinear Schrödinger equation with complex coefficients, allowing analytical breather soliton solution. We found analytically as well as numerically that increasing the damping constant reduces the amplitude and increases the width of the soliton. When the zigzag angle decreases, the height of the soliton increases, but its width remains constant. The linear stability analysis of the system is performed. The growth rate of the instability and the instability regions are discussed as the functions of damping constant, zigzag angle and system parameters.     

双侧下颌支矢状劈开截骨术后患者可施加合适咬合力的数值研究

双侧下颌支矢状劈开截骨术在临床手术中广泛用于治疗缩颌、凸颌和颌面不对称患者的颌面畸形症状。本文用数值方法研究双侧下颌支矢状劈开截骨术并前移下颌骨后患者可施加的合适咬合力。首先,用缩颌患者的CT断层扫面数据建立下颌骨、关节盘、关节窝和相关软组织的高度几何相似性的几何模型;然后,用有限元模型模拟双侧下颌支矢状劈开截骨术后患者的咬合过程。通过分析发现,术后关节盘上的位移处于正常的范围,而应力却远远超过正常范围,因此,将应力因素作为确定术后患者可施加的合适咬合力的标准。当施加正常咬合力的25%时,关节盘上的应力分布和术前没有显著性差异,同时下颌骨上的应力水平也处于正常范围。     

基于主成分分析和分层树集合划分的Huffman算法图像压缩研究

互联网的飞速发展,产生了大量的图像信息.为了减少图片占用的存储空间,提高图像质量,提出了一种将主成分分析（PCA）和分层树集合划分（SPIHT）压缩算法相结合的有损图像压缩算法.首先对图像进行主成分分解,选取主要特征值进行压缩,再利用SPIHT算法将图像分解成不同子带的小波系数进行压缩,对SPIHT压缩系数进行哈夫曼编码,实现图像二级压缩.将本文提出的算法与SPIHT、SPIHT的哈夫曼编码、JEPG2000、PCA压缩算法进行了比较,结果表明本算法较其他压缩算法具有更好的性能,在压缩比相同的情况下能获得更高的PNSR和SSIM.     

一种基于特征分解的图像融合方法

一幅图像可以分解成几何特征不同的纹理部分和卡通部分,基于这两大特征提出了一种图像融合方法.利用卡通和纹理特征的差异,通过学习分别得到卡通字典和纹理字典.在融合过程中,分别利用特定的卡通和纹理字典对源图像的卡通和纹理部分进行融合,融合后的卡通和纹理部分经简单相加得到融合图像.实验结果表明,所提方法是有效的.     

Characterization of a sCMOS‐based high‐resolution imaging system

The detection system is a key part of any imaging station. Here the performance of the novel sCMOS‐based detection system installed at the ID17 biomedical beamline of the European Synchrotron Radiation Facility and dedicated to high‐resolution computed‐tomography imaging is analysed. The system consists of an X‐ray–visible‐light converter, a visible‐light optics and a PCO.Edge5.5 sCMOS detector. Measurements of the optical characteristics, the linearity of the system, the detection lag, the modulation transfer function, the normalized power spectrum, the detective quantum efficiency and the photon transfer curve are presented and discussed. The study was carried out at two different X‐ray energies (35 and 50 keV) using both 2× and 1× optical magnification systems. The final pixel size resulted in 3.1 and 6.2 µm, respectively. The measured characteristic parameters of the PCO.Edge5.5 are in good agreement with the manufacturer specifications. Fast imaging can be achieved using this detection system, but at the price of unavoidable losses in terms of image quality. The way in which the X‐ray beam inhomogeneity limited some of the performances of the system is also discussed.     

Insight into 3D micro‐CT data: exploring segmentation algorithms through performance metrics

Three‐dimensional (3D) micro‐tomography (µ‐CT) has proven to be an important imaging modality in industry and scientific domains. Understanding the properties of material structure and behavior has produced many scientific advances. An important component of the 3D µ‐CT pipeline is image partitioning (or image segmentation), a step that is used to separate various phases or components in an image. Image partitioning schemes require specific rules for different scientific fields, but a common strategy consists of devising metrics to quantify performance and accuracy. The present article proposes a set of protocols to systematically analyze and compare the results of unsupervised classification methods used for segmentation of synchrotron‐based data. The proposed dataflow for Materials Segmentation and Metrics (MSM) provides 3D micro‐tomography image segmentation algorithms, such as statistical region merging (SRM), k‐means algorithm and parallel Markov random field (PMRF), while offering different metrics to evaluate segmentation quality, confidence and conformity with standards. Both experimental and synthetic data are assessed, illustrating quantitative results through the MSM dashboard, which can return sample information such as media porosity and permeability. The main contributions of this work are: (i) to deliver tools to improve material design and quality control; (ii) to provide datasets for benchmarking and reproducibility; (iii) to yield good practices in the absence of standards or ground‐truth for ceramic composite analysis.     

硬X射线焦斑环孔编码成像的理论与实验研究

针对几十~百keV能量的低强度X射线焦斑源测量,建立了高探测效率环孔编码成像技术。研究给出了环孔成像效率和信噪比与环孔结构参数的关系,采用微联结的环孔结构设计并模拟了联结区尺寸对成像质量的影响,解决了环孔结构同轴成像技术难题。所建立环孔成像系统应用于Unique-II X射线焦斑源成像实验。结果表明,X射线焦斑的空间分布近似为‘马鞍’形状,而且中间部分的强度低于两侧的强度,与针孔成像结果相似,但环孔的探测效率明显高于针孔的效率。最后,分析了维纳滤波与R-L两种复原图像方法的效果。