Effect of Insoluble Surfactants on Drainage and Rupture of a Film between Drops Interacting under a Constant Force

The deformation, drainage, and rupture of an axisymmetrical film between colliding drops in the presence of insoluble surfactants under the influence of van der Waals forces is studied numerically at small capillary and Reynolds numbers and small surfactant concentrations. Constant-force collisions of Newtonian drops in another Newtonian fluid are considered. The mathematical model is based on the lubrication equations in the gap between drops and the creeping flow approximation of Navier–Stokes equations in the drops, coupled with velocity and stress boundary conditions at the interfaces. A nonuniform surfactant concentration on the interfaces, governed by a convection–diffusion equation, leads to a gradient of the interfacial tension which in turn leads to additional tangential stress on the interfaces (Marangoni effects). The mathematical problem is solved by a finite-difference method on a nonuniform mesh at the interfaces and a boundary-integral method in the drops. The whole range of the dispersed to continuous-phase viscosity ratios is investigated for a range of values of the dimensionless surfactant concentration, Peclét number, and dimensionless Hamaker constant (covering both “nose” and “rim” rupture). In the limit of the large Peclét number and the small dimensionless Hamaker constant (characteristic of drops in the millimeter size range) a fair approximation to the results is provided by a simple expression for the critical surfactant concentration, drainage being virtually uninfluenced by the surfactant for concentrations below the critical surfactant concentration and corresponding to that for immobile interfaces for concentrations above it.     

The effects of cis–trans configuration of cyclohexane multi-carboxylic acids on colloidal forces in dispersions: steric, hydrophobic and bridging

The effects of cis- and trans-1,2-, trans-1,4-cyclohexanedicarboxylic acid, 95% cis-1,3,5-cyclohexane tricarboxylic acid and cis-1,2,3,4,5,6-cyclohexanehexacarboxylic acid on the yield stress–pH behaviour of concentrated ZrO₂ dispersions are reported. Adsorbed cis-1,2,3,4,5,6-cyclohexanehexacarboxylic acid imparts predominantly steric interactions. It forms a steric barrier keeping the interacting particles apart. Adsorbed cis- and trans-1,2 increase the maximum yield stress and this was attributed to a hydrophobic force resulting from the part of the cyclohexane ring sticking out into the solution which is devoid of charged or hydrophilic group. Adsorbed trans-1,4 increases the maximum yield stress by at least threefold and its configuration favours strong bridging interaction with an adjacent particle. Predominantly, cis-1,3,5 also increases the maximum yield stress but only by 60% at the same additive concentration. This was attributed to a smaller degree of bridging.     

Stabilization of a high energy molecular conformation by specific intermolecular forces, a novel planar benzylideneaniline system

The system containing six benzylideneanilines (BA) has been studied: Group 1:

Ion-specific hydration effects: Extending the Poisson-Boltzmann theory

In aqueous solutions, dissolved ions interact strongly with the surrounding water and surfaces, thereby modifying solution properties in an ion-specific manner. These ion-hydration interactions can be accounted for theoretically on a mean-field level by including phenomenological terms in the free energy that correspond to the most dominant ion-specific interactions. Minimizing this free energy leads to modified Poisson-Boltzmann equations with appropriate boundary conditions. Here, we review how this strategy has been used to predict some of the ways ion-specific effects can modify the forces acting within and between charged interfaces immersed in salt solutions.     

Apparent hydrodynamic thickness of densely grafted polymer layers in a theta solvent

We study the drainage of a near-theta solvent through densely grafted polymer layers and compare to recent notions that these layers display little permeability to solvent flow at surface separations less than a “hydrodynamic thickness.” The solvent is trans-decalin (a near-theta solvent at the experimental temperature of 24°C). The polymer is polystyrene (PS) end-attached to two opposed mica surfaces via the selective adsorption of the polyvinylpyridine (PVP) block of a PS-PVP diblock copolymer. The experimental probe was a surface forces apparatus modified to apply small-amplitude oscillatory displacements in the normal direction. Out-of-phase responses reflected viscous flow of solvent alone—the PS chains did not appear to contribute to dissipation over the oscillation frequencies studied. The value of the hydrodynamic thickness (R_H) was less than the coil thickness (L_o) measured independently from the onset of surface–surface interactions in the force-distance profile, implying significant penetration of the velocity field into the polymer layer. As the surface–surface separation was reduced from 3L_o to 0.3L_o, the apparent hydrodynamic thickness (R) decreased monotonically to values R ≪ R_H. Physically, this indicates that the “slip plane” moved progressively closer to the solid surfaces with decreasing surface–surface separation. This was accompanied by augmentation of the effective viscosity by a factor of up to approximately 5, indicating somewhat diminished permeability of solvent through the overlapping polymer layers. Similar results hold for the flow through surface-anchored polymers in a good solvent. It is interesting to note the strong stretching of densely end-grafted polymers in a theta solvent. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 2961–2968, 1997     

Single image non-uniformity correction using compressive sensing

A non-uniformity correction (NUC) method for an infrared focal plane array imaging system was proposed. The algorithm, based on compressive sensing (CS) of single image, overcame the disadvantages of “ghost artifacts” and bulk calculating costs in traditional NUC algorithms. A point-sampling matrix was designed to validate the measurements of CS on the time domain. The measurements were corrected using the midway infrared equalization algorithm, and the missing pixels were solved with the regularized orthogonal matching pursuit algorithm. Experimental results showed that the proposed method can reconstruct the entire image with only 25% pixels. A small difference was found between the correction results using 100% pixels and the reconstruction results using 40% pixels. Evaluation of the proposed method on the basis of the root-mean-square error, peak signal-to-noise ratio, and roughness index (ρ) proved the method to be robust and highly applicable.     

凝胶成像分析系统测试结果的计算机处理

用GDS－7600凝胶成像分析系统对蛋白质凝胶电泳板进行了成像和分析,然后再将图像、图表通过计算机处理插入到word文档中并编辑为word文档的内容。     

煤燃烧过程中表面结构变化的SEM图像分析

介绍了SEM图像分析的多种方法,并讨论了各自的描述能力,利用这些方法分析煤在燃烧各阶段SEM图像,通过研究得到煤在燃烧过程中表面分形维数的变化规律,同时可获得表面孔的某些参数变化历程。分析表明,淮南低变质煤在850℃燃烧过程中,煤焦颗粒表面的分维数有一个先变低后变高的过程,煤焦表面分维数在2.2至2.5区间内变化;同时孔径分布由近双曲线分布变化为近正态分布,孔油加权平均形状因子增加,在研究过程中发现,不同的计算方法会对图像的分形维数值产生影响,确定合适的计算方法是分形理论在煤燃烧领域中应用的关键。通过比较发现Xie法较为适合计算煤焦表面SEM图像。     

Hydrophobic‐Force‐Driven Removal of Organic Compounds from Water by Reduced Graphene Oxides Generated in Agarose Hydrogels

Hydrophobic reduced graphene oxides (rGOs) were generated in agarose hydrogel beads (AgarBs) by NaBH₄ reduction of graphene oxides (GOs) initially loaded in the AgarBs. The resulting rGO‐loaded AgarBs were able to effectively adsorb organic compounds in water as a result of the attractive hydrophobic force between the rGOs in the AgarBs and the organic compounds dissolved in aqueous media. The adsorption capacity of the rGOs was fairly high even toward reasonably water‐soluble organic compounds such as rhodamine B (321.7 mg g^?1) and aspirin (196.4 mg g^?1). Yet they exhibited salinity‐enhanced adsorption capacity and preferential adsorption of organic compounds with lower solubility in water. Such peculiar adsorption behavior highlights the exciting possibility for adopting an adsorption strategy, driven by hydrophobic forces, in practical wastewater treatment processes.     

染料黑白片XP1 400的粒度研究

本文测定了依尔福染料黑白片XP1 400在XPI套药中冲洗的染料影像及中间银影像的均方根粒度,同时又测定了在同样曝光条件下的涂层在普通黑白显影液中冲洗的黑白银影像的均方根粒度。结果表明,三种影像粒度随密度变化的规律完全不同。本文又用selwyn公式计算了中间银影像及黑白银影像的单位面积显出颗粒数,测试和计算结果表明,与黑白银影像比较,中间银影像具有均方根粒度明显低和单位面积显出颗粒数高的特点。这与光学显微镜下现察到的中间银影像及黑白银影像的形态是一致的。本文还根据实验及计算结果讨论了DIR成色剂在影像形成过程中的作用。