VA族元素对阳极铅(Ⅱ)氧化物膜半导体性质的影响(Ⅱ)

用光电化学电流法研究了铅、铅砷、铅锑和铅铋合金在4．5mol·L－1H2SO4溶液（22℃）中，以0．9V（vs．Hg／Hg2SO4）极化7h而形成的阳极膜中的氧化铅的半导体性质，合金添加剂砷、锑和铋对t－PbO（四方氧化铝）和o-PbO（斜方氧化铝）的禁带宽度没有影响，从量子效率和电位的关系可求Pb，Pb－lat％As（at％表示原子百分比，全文同），Pb-lat％Sb和Sb－lat％Bi上膜中t－Pbo的施主密度（ND）分别为9．3×1015，1．0×1016，3．1×1016和1．3×1017cm-3，平带位分别为-0．20，－0．22，－0．28和-0．08V（vs．Hg／Hg2SO4）．比较VA元素砷、锑和铋对上述膜中t－Pbo的ND（从而自由电子密度）和膜中t－Pbo的生长速率的影响，可认为法添加剂砷、锑和铋对阳极膜中t-Pbo的作用符合Hauffe规则．     

Influence of hydrogen bonding on the properties of water molecules adsorbed in zeolite frameworks

Three hydrated aluminosilicate frameworks—LiABW, NaNAT, and BaEDI—are partly optimized with the periodic Hartree–Fock CRYSTAL95 code. In particular, we optimized the positions of the adsorbed water molecules including the positions of the framework cations (ABW, NAT) or part of the framework atomic positions (ABW). This allowed us to compare cation–water clusters in the gas and adsorbed states and discuss the influence of hydrogen bonding to the framework oxygen atoms or to the neighbor water molecules on the atomic properties (quadrupole coupling constant, anisotropy of electric field gradient) of the adsorbed water molecules. The LiBIK structure obtained from X‐ray diffraction is also considered to illustrate the hydrogen bonds occurring between adsorbed water molecules. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem, 2003     

壳聚糖固体聚合物电池用膜

壳聚糖是甲壳素脱乙酰基的产物，具有良好的成膜性、生物相容性、环保以及价格低廉等特点。作为一种碱性高分子膜材料，近年来已成为聚电解质研究领域中的研究热点。本文综述了壳聚糖固体聚合物电池用膜的研究现状，其改性工艺主要包括共混、化学改性、质子酸掺杂、无机盐掺杂等方法，比较了各种工艺处理后壳聚糖固体聚合物电解质膜的性能差异，并就壳聚糖固体聚合物电解质膜中离子传导机理中有待解决的问题进行探讨，并提出了进一步改进壳聚糖固体聚合物电解质膜性能的研究思路。     

Electron microscope study of viscoelastic cationic surfactant systems

Some cationic surfactants such as cetyltrimethylammonium bromide (CTAB) show a very spectacular viscoelasticity in solution, in even very diluted states, with some aromatic substances added, such as salicylic acid. Formerly, the authors established that the remarkable solution behaviour was the result of the entanglement of such enormously elongated giant micelles, based on recognition of the existence of large aggregates, through direct observation of them as substantial images under the electron microscope.In this report, we further confirm the relation between micelle length and solution viscoelasticity after arbitrarily obtaining different size aggregates by altering the media pH, or by admixing shorter chain length surfactants than CTAB, which alone did not induce viscoelasticity.     

Surface solid-state interactions in copper-nickel-cement catalysts for hydrogenation of oxygen

The surface phase composition of alumocalcium cement-supported CuO and CuO-NiO catalysts prepared by chemical mixing has been studied using the method of thermo-vacuum curves of electric conductivity. The deactivation of these catalysts due to overheating to 800 °C under conditions of hydrogenation of oxygen is rationalized by the partial extraction of CuO (and NiO) from the stabilizing structure of the support solid solutions and by sintering of the extracted oxides and the reduced metallic phase. Complete regeneration of the CuO-NiO-talum catalysts can be achieved if a considerable amount (20%) of copper hydroxocarbonate is added.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1559–1562, September, 1994.     

Metabolomic-based investigation of Yinlan alleviating hyperlipidemia by inhibiting blood stasis and phlegm turbidity through the PXR-CYP3A4-ABCB1-FXR pathway

Yinlan lipid regulatory capsule (YL) is a composite traditional Chinese medicine (TCM) new drug to alleviate hyperlipidemia, while its therapeutic mechanism in vivo was not clarified with nontargeted metabolomics investigation. An animal model was established in rats fed a high-fat diet, and their body weights, body mass index (BMI) and blood cholesterol levels were measured. Serum, liver and kidney tissue samples were also extracted for PXR-CYP3A4-ABCB1-FXR signaling pathway research using PCR and UHPLC–MS. The obtained plasma samples were analyzed by UHPLC-Q-TOF-MS metabolomic investigation, which revealed PXR-CYP3A4-related metabolites and changes induced by YL. Finally, the key metabolites were chosen as index components, and their levels in the serum, liver, small intestine and bile were used for simultaneous UHPLC–MS-MS determination. The results indicated that YL was effective in rebalancing blood TG and TC levels (compared to controls). With respect to the PXR-CYP3A4-ABCB1 pathway, as a result of YL’s effect, gene expression or activity of the two targets decreased significantly in both the liver and kidney. The same trend was observed in the serum samples mentioned above. Metabolomics screening and data revealed that 44 metabolites can be regarded as biomarkers related to hyperlipidemia, fatty acids synthesis, and body energy consumption, as well as synthesis, transportation and exertion of cholesterol. YL’s treatment focused on 26 of them, primarily bile acids, indicating that the antihyperlipidemic effect of this drug lies in its inhibitory activity of cholesterol metabolism. Subsequent analysis of those in vivo components revealed that significant increases (compared to the model group) occurred in the blood, liver, small intestine and bile in groups that received medium and high doses of YL (while the low dose was relatively unchanged). Those target components exhibit a close relationship with PXR and/or CYP3A4. The use of YL repressed PXR expression and subsequently decreased CYP3A4 activity. As a result, synthesis of related bile acids increased, while cholesterol levels decreased, consequently leading to the attenuation of hyperlipidemia. This study comprehensively investigated the antihyperlipidemia mechanism of YL based on its repression of PXR-CYP3A4 activity and related metabolite yield, establishing an accurate method for evaluating the therapeutic effect of YL.     

Diffusion current on a nonuniform electrode: Calculation with integral equations

Identity of mathematical problems concerning calculation of the distribution of reactants’ concentrations and the current near the surface of a nonuniform (strip) electrode and distribution of displacements and forces in the case of an elastic layer “antiplane” deformation caused by the punch action. Formulas for calculating the current at a strip electrode are derived for various ratios between the electrode width and the diffusion layer thickness by means of asymptotic methods designed for calculating problems of mechanical contact interactions. It is noted that calculations of the diffusion current for involved activity distributions at the electrode surface may benefit from asymptotic methods of mechanics of contact interactions.     

Superpositioned dielectrophoresis for enhanced trapping efficiency

One of the major applications for dielectrophoresis is selective trapping and fractionation of particles. If the surrounding medium is of low conductivity, the trapping force is high, but if the conductivity increases, the attraction decreases and may even become negative. However, high-conductivity media are essential when working with biological material such as living cells. In this paper, some basic calculations have been performed, and a model has been developed which employs both positive and negative dielectrophoresis in a channel with interdigitated electrodes. The finite element method was utilized to predict the trajectories of Escherichia coli bacteria in the superpositioned electrical fields. It is shown that a drastic improvement of trapping efficiency can be obtained in this way, when a high conductivity medium is employed.     

Characterisation of the Kratos Axis Ultra with spherical mirror analyser for XPS imaging

The imaging performance of an XPS instrument employing a spherical mirror electron energy analyser has been characterised by measuring the peak position, full width at half maximum (FWHM), and lineshape, at every pixel in the image, for different modes of operation. Changes in these parameters have been identified and recommendations made for quantification of, and chemical state determination from, spectrum image data sets. Copyright © 2006 John Wiley & Sons, Ltd.     

Exact electronic properties in the classically forbidden region of a metal surface

We derive exact properties of the inhomogeneous electron gas in the asymptotic classically forbidden region at a metal–vacuum interface within the framework of local effective potential energy theory. We derive a new expression for the asymptotic structure of the Kohn–Sham density functional theory (KS‐DFT) exchange‐correlation potential energy v_xc(r) in terms of the irreducible electron self‐energy. We also derive the exact asymptotic structure of the orbitals, density, the Dirac density matrix, the kinetic energy density, and KS exchange energy density. We further obtain the exact expression for the Fermi hole and demonstrate its structure in this asymptotic limit. The exchange‐correlation potential energy is derived to be v_xc(z → ∞) = ?α_KS,xc/z, and its exchange and correlation components to be v_x(z → ∞) = ?α_KS,x/z and v_c(z → ∞) = ?α_KS,c/z, respectively. The analytical expressions for the coefficients α_KS,xc and α_KS,x show them to be dependent on the bulk‐metal Wigner–Seitz radius and the barrier height at the surface. The coefficient α_KS,c = 1/4 is determined in the plasmon‐pole approximation and is independent of these metal parameters. Thus, the asymptotic structure of v_xc(z) in the vacuum region is image‐potential‐like but not the commonly accepted one of ?1/4z. Furthermore, this structure depends on the properties of the metal. Additionally, an analysis of these results via quantal density functional theory (Q‐DFT) shows that both the Pauli W_x(z → ∞) and lowest‐order correlation‐kinetic W(z → ∞) components of the exchange potential energy v_x(z → ∞), and the Coulomb W_c(z → ∞) and higher‐order correlation‐kinetic components of the correlation potential energy v_c(z → ∞), all contribute terms of O(1/z) to the structure. Hence correlations attributable to the Pauli exclusion principle, Coulomb repulsion, and correlation‐kinetic effects all contribute to the asymptotic structure of the effective potential energy at a metal surface. The relevance of the results derived to the theory of image states and to KS‐DFT is also discussed. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005