Chemo- and regioselectivity in the reactions between highly electrophilic fluorine containing dicarbonyl compounds and amines. Improved synthesis of the corresponding imines/enamines

Chemo- and regioselectivity in the reactions between highly electrophilic fluorine containing dicarbonyl compounds (ethyl 4,4,4-trifluoroacetoacetate, 3,3,3-trifluoropyruvate and 1,1,1,5,5,5-hexafluoropentane-2,4-dione) and various benzylamines were systematically studied. The results obtained lead to the development of a generalized and practical method for large-scale synthesis of the corresponding imines/enamines, useful starting materials for preparation fluorinated amines and amino acid.     

Glucomannan from Narcissus poeticus Studied by PMR and 13C NMR Spectroscopy

Native acetylated glucomannan of molecular weight (MW) 32000 with a glucose:mannose ratio 1:30 was isolated from bulbs of Narcissus poeticus. Glucomannan was depolymerized to a fragment of MW 15000 with an unchanged primary structure and was studied using PMR and ¹³C NMR spectroscopy. It was found that the linear chain of the biopolymer consists of 1-4-bound D-gluco- and D-mannopyranose units and the O-Ac groups are localized on C-2, C-3, and C-6 hydroxyls in certain anhydromannose units.     

The identification of nitrated polycyclic aromatic hydrocarbons in diesel particulate extracts and their potential formation as artifacts during particulate collection

Summary The highly complex matrix of diesel particulate extracts was analyzed for nitrated polycyclic aromatic hydrocarbons (nitro-PAH) using fused-silica capillary-column gas chromatography along with a thermionic nitrogen-phosphorus detector (TID) and high-performance liquid chromatography followed by on-line catalytic reduction of the nitro-PAH to amino-PAH and subsequent fluorescence detection. Positive isomer identification and quantitation of nitro-PAH are from retention times of authentic standards and their mass spectra. The ease of nitro-PAH formation by nitration of PAH raises the question regarding the origin of these species, whether they are produced as “native” products during the engine combustion process and/or in the exhaust, or instead, formed as the result of chemical conversion to produce artifacts during the sampling procedure. This problem is assessed examing 1-nitropyrene-concentration in particulates of three light-duty diesel engines for different sampling times. 1-Nitropyrene concentrations show only a moderate increase with sampling time under average sampling conditions. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984     

无保护流体室温燐光法测定吲哚-3-丁酸的研究

在仅以碘化钾为重原子微扰剂、亚硫酸钠为除氧剂及无任何保护性介质存在的水溶液中 ,吲哚_3_丁酸 (IBA)能发射很强的室温光 (RTP) ;详细研究了分析测定条件及有机溶剂对RTP的影响 ;在最大光波长λex/λem =281/447nm处 ,光强度与IBA浓度在2.0×10 -7～1.0×10 -5mol/L范围内呈良好的线性关系 ,检出限4.3×10-8 mol/L ;方法直接用于强化水样和土壤中IBA的测定 ,回收率96 %～104 % ,相对标准偏差2.37 %～3.97 %。     

Viscosity of mixtures of polymers and microemulsions — the Huggins interaction coefficient

Microemulsions used in enhanced oil recovery are usually used in conjunction with a polymer solution that provides mobility control by reducing the permeability of the formation and/or increasing the viscosity of the injected fluid. Microemulsions, which are mixtures of at least four components — water, oil, surfactant and cosurfactant (and, usually, inorganic salts) are complex even in the absence of polymer and consequently, studies of their phenomenon tend to be phenomenological. An approach found to be useful to circumvent this has been to consider the microemulsion particles dispersed in their external phase to be macromolecules which retain their integrity when diluted with external phase or when mixed with polymers. Thus the dispersed phase components are treated as a pseudocomponent. If this approach is followed, many features of the phase diagram of polymer-microemulsion mixtures can be rationalized. It is therefore of some interest to determine whether a similar approach can be used to understand or predict the viscosity of mixtures in which a simple mixing rule for viscosities can be utilized to gain further insight into the polymer-microemulsion interaction.     

Enantioselectivity of 6-O-alkyldimethylsilyl-2,3-di-O-methyl-β-cyclodextrins as chiral stationary phases in capillary GC

Summary Clenbuterol has been determined in urine by solidphase extraction on a C₁₈ cartridge, diazotization of the eluate with nitrite, coupling of the diazonium ion with 1-(naphthyl)ethylenediamine, and separation of the azo dye formed by HPLC with a C₁₈ column and a micellar mobile phase containing 0.1 M sodium dodecyl sulphate, 12%n-butanol and 0.05 M citrate buffer, pH 3. Recoveries higher than 90% were obtained by mixing the samples with a 20% 0.2 M NaOH before extraction. Limits of detection of 51 and 6.7 ng L⁻¹ were obtained with spectrophotometric and thermal lens spectrometric detection, respectively; respective repeatabilities were 3.1% (5 μg mL⁻¹) and 5.6% (0.16 μg mL⁻¹).     

Studies of surface properties of Na- and La-montmorillonites

This paper presents possible applications of thermal analysis, sorptometry and porosimetry to study physico-chemical properties of Na- and La-montmorillonite samples, especially for determination of total surface heterogeneity. The quasi-isothermal thermogravimetric (Q-TG) mass loss and its first derivative (Q-DTG) curves with respect to temperature and time obtained during programmed liquid thermodesorption under quasi-isothermal conditions have been used to study adsorbed layers and heterogeneous properties of the Na- and La-montmorillonites. Calculations of the desorption energy distribution functions by analytical procedure using mass loss Q-TG and differential mass loss Q-DTG curves of thermodesorption under quasi-isothermal conditions of polar and non-polar liquid vapours preadsorbed on a material surface are presented. Parameters relating to porosity of samples were determined by sorptometry, mercury porosimetry and atomic force microscopy (AFM). From nitrogen sorption isotherms from sorptometry and porosimetry methods, the fractal dimensions of montmorillonites have been calculated. Moreover, a new approach is proposed to calculate fractal dimensions of materials obtained from Q-TG curve; this is compared with values obtained by the above methods. The total heterogeneous properties (energy distribution function and pore-size distribution functions) of samples studied were estimated. The radius and pore volume of the tested samples calculated on the basis of thermogravimetry, sorptometry and porosimetry techniques were compared and good correlations obtained.     

HPLC of antibiotics. 1. Streptolydigin and related compounds

Two new acyltetramic acids related to streptolydigin have been isolated from fermentations of Streptomyces lydicus. The principal members of this complex were resolved by TLC on silica gel. However, the methods of detection, permanganate spray or bioautography, were not suitable for both crude fermentation broths and purified extracts. Gas chromatography is unsuitable for the detection of either underivatized or silylated streptolydigins. High performance liquid chromatography (HPLC) particularly on triethylaminoethyl cellulose is rapid and sensitive and is the method of choice for the analysis of both crude and purified samples. Using high performance liquid chromatography, two components were detected in the complex, which are not observed using any of the other chromatographic procedures.     

Microemulsion photopolymerization of methacrylates stabilized with sodium dodecyl sulfate and poly(N-acetylethylenimine) macromonomers

Methyl methacrylate and butyl methacrylate were polymerized in oil-in-water microemulsions that were stabilized by sodium dodecyl sulphate (SDS). A poly(N-acetylethylenimine) (PNAEI) macromer was also included in the recipe, as a cosurfactant and a comonomer. Polymerizations were initiated by UV-irradiation. The average diameters of latex particles, obtained by STM, were in the range of 17-200 nm. The experimental data evidenced that the particle size was mainly dependent on the SDS/PNAEI ratio. Polymerization yields were around 75-85%. The synthesized copolymers have viscosity average molecular weights in the range of 2.1-2.4×10⁶ and glass transition temperatures of 38.0-43.5°C, lower than those obtained without using PNAEI. The investigation by means of FTIR and 1H-NMR techniques revealed that PNAEI was incorporated into the nanoparticles.     

Synthesis of Naturally Occurring Pyrazine and Imidazole Alkaloids from Botryllus LeachiRID=”a”ID=”a”?Dedicated to Prof. G. M?rkl on the occasion of his 75th birthday

The synthesis of the naturally occurring and biologically active alkaloids 1 and 2, first isolated from the red ascidian Botryllus leachi by Duran et al. [1], is described and the structure proposed for Botryllazine B (1) is confirmed. The analytical data for 2-(p-hydroxybenzoyl)-4-(p-hydroxyphenyl)imidazole (2) are discussed and compared with the literature. With special emphasis of ¹H NMR data the tautomerism of aroylimidazolemethanones is described.