Synthesis and Liquid Crystalline Behavior of Random Copolymer of Poly(ethylene oxide) Macromonomer and Liquid Crystalline Monomer by the Photon Transmission Technique

Random copolymers of poly(ethylene oxide) macromonomer with p‐vinylbenzyl end‐functional group (PEOVB) and liquid crystalline monomer, namely 6‐(4‐cyanobiphenyl‐4′‐oxy)hexyl acrylate (COA), were prepared by conventional free radical polymerization. A living anionic polymerization technique was employed for the synthesis of PEO macromonomers bearing p‐vinylbenzyl moiety at one end. The photon transmission method was also applied to study the phase transitions of COA monomer and its random copolymer with PEO. It was found that, for both samples, the nematic‐smectic A transition is continuous, but the critical fluctuation regions do not allow to obtain 3D XY values. Instead, we have obtained the values close to mean field regime. Scaling of thermal hystersis for random copolymer sample near the nematic‐isotropic transition was studied as well. Thermal hysteresis loops were produced under linearly varying temperature. It was shown that the areas of the hysteresis loops scale with the temperature scanning rate with an exponent being equal to 0.614 which is in good agreement with the field‐theoretical value.     

Critical Evaluation of Adsorption–Desorption Hysteresis of Heavy Metal Ions from Carbon Nanotubes: Influence of Wall Number and Surface Functionalization

Single‐, double‐, and multi‐walled carbon nanotubes (SWCNTs, DWCNTs, and MWCNTs), and two oxidized MWCNTs with different oxygen contents (2.51 wt % and 3.5 wt %) were used to study the effect of the wall number and surface functionalization of CNTs on their adsorption capacity and adsorption–desorption hysteresis for heavy metal ions (Ni^II, Cd^II, and Pb^II). Metal ions adsorbed on CNTs could be desorbed by lowering the solution pH. Adsoprtion of heavy metal ions was not completely reversible when the supernatant was replaced with metal ion‐free electrolyte solution. With increasing wall number and amount of surface functional groups, CNTs had more surface defects and exhibited higher adsorption capacity and higher adsorption–desorption hysteresis index (HI) values. The coverage of heavy metal ions on the surface of CNTs, solution pH, and temperature affect the metal ion adsorption–desorption hysteresis. A possible shift in the adsorption mechanism from mainly irreversible to largely reversible processes may take place, as the amount of metal ions adsorbed on CNTs increases. Heavy metal ions may be irreversibly adsorbed on defect sites.     

Ultrasound-assisted crystallization (sonocrystallization)

The positive influence of ultrasound (US) on crystallization processes is shown by the dramatic reduction of the induction period, supersaturation conditions and metastable zone width. Manipulation of this influence can be achieved by changing US-related variables such as frequency, intensity, power and even geometrical characteristics of the ultrasonic device (e.g. horn type size). The volume of the sonicated solution and irradiation time are also variables to be optimized in a case-by-case basis as the mechanisms of US action on crystallization remain to be established. Nevertheless, the results obtained so far make foreseeable that crystal size distribution, and even crystal shape, can be ‘tailored’ by appropriate selection of the sonication conditions.     

980nm半导体激光器输出光谱特性的改善

为了改善980nm半导体激光器的输出光谱特性,采用传输矩阵分析法推导了双布喇格光纤光栅谐振腔的传输表达式,对布喇格光纤光栅长度和谐振腔腔长对输出光谱的影响进行模拟仿真,结果表明布喇格光纤光栅长度对输出光谱的影响大于谐振腔腔长对输出光谱的影响,加长布喇格光纤光栅长度能压缩输出光谱线宽.在980nm半导体激光器尾纤上写入不同布喇格光纤光栅长度的双布喇格光纤光栅谐振腔,验证了引入双布喇格光纤光栅谐振腔在压缩980nm半导体激光器输出光谱线宽的同时改善了其输出光谱的稳定性.当环境温度在0~75℃范围内变化时,980nm半导体激光器输出中心波长仅变化0.06nm.     

Relaxation dynamics and fragility during liquid–glass transitions of poly(propylene glycol)s

The acoustic and thermal properties of the liquid–glass transitions of propylene glycol and its oligomers, poly (propylene glycol)s, were studied by temperature modulated DSC and Brillouin scattering. The fragility indices were determined from Angell plots using the observed modulation frequency dependence of the complex heat capacity. The variation in the glass transition temperatures is discussed on the basis of the free volume theory. The relaxation time of the structural relaxation obeys the Vogel–Fulcher law, and its high frequency end is in good agreement with the result of the dielectric measurement in the literature. The correlation between the observed thermal expansion coefficients and the glass transition temperature is discussed based on the free volume theory. The sound velocity and attenuation were accurately determined as a function of the temperature by Brillouin scattering by combination with the refractive index measurement. The relaxation dynamics were discussed by considering the relaxation from segmental motions. All of these physical properties were discussed based on the third-order anharmonicity and the Grüneisen parameter.     

Effect of Gaussian size distribution width on minimum fluidization velocity in tapered gas–solid fluidized beds

This paper investigated the effect of Gaussian distribution width, average particle diameter, particle loading, and the tapered angle on minimum fluidization velocity (U_mf) by conducting extensive experiments in tapered fluidized beds. Three powders with Gaussian size distribution and different distribution widths were used in the experiments. An increase in U_mf with increasing the average particle diameter, particle loading, and the tapered angle was observed. There was also a nonmonotonic behavior of U_mf as the Gaussian distribution width increased. An empirical correlation including dimensionless groups for predicting U_mf in tapered beds was developed in which the effect of distribution width was considered. The proposed correlation predictions were in good agreement with the experimental data, with a maximum deviation of 16.5% and average and standard deviations of, respectively, 6.4% and 7.4%. The proposed correlation was also compared with three earlier models, and their accuracy was discussed.     

利用光杠杆法测量金属丝的弹性滞后环

利用大学物理实验中的光杠杆法测定金属丝弹性模量的原理和设备,对具有超弹性的NiTi丝的弹性滞后环进行了测定结果表明,此种方法可以很好地测定NiTi丝的弹性滞后环,而且操作简单使用方便,是一种非常有效的测定金属细丝弹性滞后环的方法.     

低频液体表面波激光衍射条纹的特征

用激光衍射法实现了低频液体表面波稳定、清晰、反衬度非常高的条纹,并发现了缺级现象.理论上分析了表面波的光衍射效应,得到了衍射光场和表面波之间的解析表达式,表达式包括衍射因子和干涉因子.通过对衍射因子和干涉因子的分析,得到衍射条纹空间分布与表面波波长的关系、条纹的半角宽度与入射激光光斑覆盖表面波的个数和入射方向的关系、衍射光强度与表面波振幅的关系,并解释了条纹缺级现象.     

Magnetic Phase Diagram of the MnxFe2−xP1−ySiy System

The phase diagram of the magnetocaloric Mn_xFe_2−xP_1−ySi_y quaternary compounds was established by characterising the structure, thermal and magnetic properties in a wide range of compositions (for a Mn fraction of 0.3 ≤ x < 2.0 and a Si fraction of 0.33 ≤ y ≤ 0.60). The highest ferromagnetic transition temperature (Mn_0.3Fe_1.7P_0.6Si_0.4, T_C = 470 K) is found for low Mn and high Si contents, while the lowest is found for low Fe and Si contents (Mn_1.7Fe_0.3P_0.6Si_0.4, T_C = 65 K) in the Mn_xFe_2−xP_1−ySi_y phase diagram. The largest hysteresis (91 K) was observed for a metal ratio close to Fe:Mn = 1:1 (corresponding to x = 0.9, y = 0.33). Both Mn-rich with high Si and Fe-rich samples with low Si concentration were found to show low hysteresis (≤2 K). These compositions with a low hysteresis form promising candidate materials for thermomagnetic applications.     

Polarization-enhanced bulk photovoltaic effect of BiFeO3 epitaxial film under standard solar illumination

In this Letter, we report the polarization-enhanced bulk photovoltaic effect (BPV) in pristine BiFeO₃ (BFO) epitaxial film under standard 1 sun AM 1.5 G illumination. High-quality epitaxial BFO films are grown on (001)-oriented niobium doped-SrTiO₃ substrates by pulsed laser deposition. The best BFO film based photovoltaic device achieves a power conversion efficiency of 0.0062% under standard illumination. Besides, it is found that the number of bipolar pulses plays a key role in improving the short-circuit current density and open-circuit voltage. These results are beneficial for further understanding of physical origin of the photovoltaic properties in ferroelectric oxides.