Normal coordinate analysis of MSiH3 moieties in transition metal complexes and comparison to results obtained for silyl halides

In order to examine the influence of the transition metal on the metal-silyl fragment MSiH₃ and the metal-silicon bond, polarized Raman spectra of the complexes (C₅R₅)(CO)₂FeSiH₃ R = H (Cp) (1a), Me (Cp^*) (1b)], (C₅H₅)(CO)(PPh₃)FeSiH₃ (1c), (C₅Me₅)(CO)₂RuSiH₃ (2), (C₅R₅)(CO)₂(PMc₃)MoSiH₃ [R = H (3a), Me (3b)], and (C₅R₅)(CO)₂(PMe₃)WSiH₃ [R = H(4a), Me (4b)] have been recorded. The spectral data have been evaluated and interpreted on the basis of a normal coordinate analysis of the MSiH₃ core and the derived force constants and potential energy distributions were compared to results obtained for analogous halogen derivatives in the series XSiH₃ [X = Br (5), I (6)].     

Design of experimental routes and data processing for the determination of the depth-distribution of energy in real solids

No adequate thermodynamic definition of non-equilibrated solids is available at present. In this paper a method is suggested for the energetic characterization of solids by estimation of the distribution of the differential molar internal energies — as they appear during the breakdown of sample e.g. by chemical reaction, i.e. the ‘depth distribution of differential energies’ (DDE) of samples. Thermodynamic considerations are presented for approximating this quantity — and experimental possibilities proposed to attain the needed input information by thermoanalytical methods. Application of the suggested procedure is supposed to contribute to the better understanding of structure — energy — reactivity relations in real solids.     

Determination of thermodynamic functions of sorption for cyclohexyl-, piperidyl-, morpholyl-, and thiomorpholyl-n-alkanes by capillary gas-liquid chromatography

The values of partial molar free energy (G), enthalpy (H), and entropy (S) of sorption in the homologous series ofN-alkylpiperidines,N-alkylmorpholines,N-alkyl thiomorpholines, and alkylcyclohexanes were determined. It was found that the free energy of sorption is determined to a greater extent by the enthalpy term than by the entropy one. The free energy of sorption of the first homolog decreases when then-alkyl chain is attached directly to the carbon atom of the cycle and increases in the case ofN-alkylsubstituted heterocycles. The influence of the heteroatom nature on intermolecular interactions of homologs with the nonpolar stationary phase was quantitatively estimated on the basis of thermodynamic data.Dead time necessary for calculation of the retention factor was determined by the retention of methane injected into the column simultaneously with the sample.Translated from Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 2030–2032, August, 1996.     

Theoretical study of some 1,3-substituted (1,3-diketonato)borondifluorides. Potential energy curve relevant to the barrier crossing reaction

Ab initio Hartree-Fock calculations utilising STO-3G, 3-21G^* and 6-31G^* basis sets have been performed on three neutral and highly polar molecules, (diformylmethine)borondifluoride, (acetylacetonato)borondifluoride and (dibenzylmethine) borondifluoride. The calculated and experimental structures are well correlated when using the HF/3-21G^* basis set, except for the structure parameters involving the boron atom. The HF/6-31G^* basis set does not improve the accuracy in structure calculations. The conformational analysis is in agreement with the experimentally observed C_2v symmetrical structures, where the boron atom is tetrahedrally coordinated. The calculations support a one-dimensional ground state barrier crossing reaction for (dibenzylmethine)borondifluoride, where the phenyl torsion is the most likely reaction coordinate. Both HF/6-31G^* calculations and the second-order Møller-Plesset correction with the 3-21G^* basis set suggest an activation energy of the ground state reaction of about 30 kJ mol⁻¹. The ground state barrier crossing reaction kinetics is evaluated by the Kramers theory. The calculated ground state parameters relevant to the barrier crossing reaction are compared with the experimentally observed excited state values.     

Effects of glucose,glutamine, and malate on the metabolism of spodoptera frugiperda clone 9 (sf9) cells

Optimal design and operation of bioreactors for insect cell culture is facilitated by functional relations providing quantitative information on cellular metabolite consumption kinetics, as well as on the specific cell growth rates (μ_G). Initial specific consumption rates of glucose, malate, and oxygen, and associated changes in μ_G, were measured forSpodoptera frugiperda clone 9 (Sf9) cells grown in batch suspension culture in medium containing 7–35 mM glucose, 0–16 mM malate, and 4–16 mM glutamine. The initial specific glucose consumption rate (q _G ) could be described by a modified Michaelis-Menten equation treating malate as a “competitive” inhibitorK ₁ = 6.5 mM) and glutamine as a “noncompetitive” inhibitorK _I = 14 mM) ofq _G , with aK _m of 7.1 mM for glucose. All three carbon sources were found to increase μ_G in a saturable manner, and a modified Monod equation was employed to describe this relationship (μ_Gmax = 0.047 h^-1). The initial specific oxygen consumption rate (q_O2) in Sf9 cells could be related to μ_G by the maintenance energy model, and it was calculated that, under typical culture conditions, about 15–20% of the cellular energy demand comes from functions not related to growth. Fitted parameters in mathematical expression for μg: K₄, Monod constant for glucose (mM); K₅, modified Monod constant for malate (mM); K₆, Monod constant for glutamine (mM); m_o2, specific consumption rate of oxygen by the cells under zero-growth conditions (nmol/cell/h); q_F, initial specific fumarate production rate (nmol/cell/ h);q _G , initial specific glucose consumption rate (nmol/cell/h); q_Gmax, maximum initial specific glucose consumption rate (nmol/cell/h);q _M , initial specific malate consumption rate (nmol/cell/h); q_o2, initial specific oxygen consumption rate (nmol/cell/h); Y_o2, cell yield on oxygen (cells/nmol); μ, initial specific cell growth rate (h^-1); μ_g, initial specific cell growth rate (h^-1); μG_max, maximum initial specific cell growth rate (h^-1).     

Influence of drawing and heat treatment on surface free energies of polyethylene terephthalate fibers

The surface free energies of polyethylene terepthalate fibers with different draw ratios were experimentally determined by contact angle measurements inn-alkane/water systems. The dispersive component of the surface free energy increased with increasing draw ratio, whereas the nondispersive one remained almost constant. After heat treatment, the dispersive surface free energy increased, but was reduced above 140°C. The nondispersive component increased by heat treatment at 190°C. The increases in the density and birefringence of the fibres due to the drawing and heat treatment suggested that the increase in the dispersive surface free energy was caused by the increase in the atomic density at the fiber surface due to drawing and heat treatment. ESCA results indicated that the increment in the nondispersive surface free energy due to heat treatment was caused by the addition of functional groups to the fiber surface due to heat treatment.     

Synthesis and photochemical properties of porphyrie-quinone compounds

The results of studies on the synthesis of porphyrin-quinone compounds and investigation of their photochemical properties are summarized. Effects of various factors (the redox potential, the distance between donor and acceptor moieties, their spatial orientation, the free energy of the reaction, and solvents) on the photoinduced electron transfer in these model systems are discussed. The dyad and triad model systems have been compared. The possibility of using these systems for modeling the primary steps of photosynthesis is discussed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1. pp. 9–24, January, 1996.     

Preparation of CH3SiO3/2 film from methyltriethoxysilane

An oligomer solution was prepared from methyltriethoxysilane with HNO₃ catalyst. Aluninum acetylacetonate was introudced into the solution to eliminate crystalline precipitates (CH₃SiO_3/2)₈. Self-sustained film was attempted by dropping the solution onto an aqueous solution, into which NaCl was added to elevate the solution density. The film formation greatly depended both on the reaction time and on the supporting solution. The structure of the film thus obtained was investigated by FTIR attenuated total reflectance spectroscopy.     

Determinations of combustion and formation enthalpies of C60 and C70

By using a micro-bomb calorimeter, the standard enthalpies of combustion of C₆₀ and C₇₀ have been determined to be - (25 947.1±8.5) and - (29 956.1 ± 8.9) kJ/mol respectively. A g. 1. c. analysis indicated that the amounts of residual organic solvents in the samples were very small, and their effects on the final results were negligible. The energy of combustion ofC60 determined in this work is in agreement in the uncertainty interval with that determined by means of traditional calorimeter using macro amount of sample. The enthalpies of formation of these two substances have been derived. The strain energies in the molecules of C₆₀ and C₇₀ were estimated by a bond energy scheme and by using corannulene as the model compound, the results estimated from different methods are very close. Project supported by the National Natural Science Foundation of China (Grant No. 29473143)     

Obtaining Kinetic Parameters by Modulated Thermogravimetry

A new technique, called modulated thermogravimetry, is introduced as a tool for obtaining continuous kinetic information for decomposition and volatilization reactions. The approach makes use of an oscillatory temperature program to obtain kinetic parameters during a mass loss. MTGA™ may be used under quasi-isothermal conditions to observe a single mass loss or may be combined with linear heating rate or Hi-Res™ controlled rate thermogravimetry to scan from one mass loss region to another. Results obtained are in agreement with those obtained by other kinetic methods. This revised version was published online in July 2006 with corrections to the Cover Date.