Identification of defect sites on oxide surfaces by metastable impact electron spectroscopy

In this review, thin films of SiO₂ on Mo(1 1 2) and MgO(1 0 0) on Mo(1 0 0) have been characterized using metastable impact electron and ultraviolet photoelectron spectroscopies (metastable impact electron spectroscopy (MIES) and ultraviolet photoelectron spectroscopy). The electronic and chemical properties of the thin films are identical to those of the corresponding bulk oxides. For different prepared defective SiO₂ surfaces, additional features are observed in the band-gap region. These features arise from vacancies or excess oxygen and are consistent with theoretical predictions of additional occupied states in the band-gap due to point defects. Extended defect sites on SiO₂ and MgO are identified using MIES by a narrowing of the O(2p) features with a reduction in the density of extended defect sites. MIES of adsorbed Xe (MAX) is also used to estimate the density of extended defect sites. Furthermore, it is shown that CO is an appropriate probe molecule for estimating the defect density of MgO surfaces. Upon Ag exposure, the change in the work function of a low defect MgO(1 0 0) versus a high defect surface is markedly different. For a sputter-damaged MgO(1 0 0) surface, an initial decrease of the work function was found, implying that small Ag clusters on this surface are electron deficient. In contrast, for SiO₂ no significant change of the work function upon Ag exposure with increasing defect density was observed. On MgO(1 0 0), the presence of defect sites markedly alter the electronic and chemical properties of supported Ag clusters. Such a strong influence of defect sites was not found for Ag clusters on SiO₂.     

IMPACT MODEL RESOLUTION ON PAINLEVE’S PARADOX

Painlevé‘s paradox is one of the basic difficulties for solving LCP of dynamic systems subjected to unilateral constraints. A bi-nonlinear parameterized impact model, consistent with dynamic principles and experimental results, is established on the localized and quasi-static impact model theory. Numerical simulations are carried out on the dynamic motion of Painlevé‘s example. The results confirm ““““impact without collision““““ in the inconsistent states of the system. A ““““critical normal force““““ which brings an important effect on the future movement of the system in the indeterminate states is found. After the motion pattern for the impact process is obtained from numerical results, a rule of the velocity‘s jump that incorporates the tangential impact process is deduced by using an approximate impulse theory and the coefficient of restitution defined by Stronge. The results of the jump rule are quite precise if the system rigidity is big enough.     

Experimental and numerical investigation of aramid fibre reinforced laminates subjected to low velocity impact

The low velocity impact performance of domestic aramid fibre reinforced laminates is investigated experimentally and numerically. Laminates with different thicknesses are impacted by drop-weight test machine under different impact energies. The time histories of impact force are recorded and ultrasonic C-scan technology is used to inspect the internal damage of the laminates. Numerical simulation is conducted using finite element method (FEM), taking into account both intralaminar and interlaminar damage. The intralaminar damage model is based on the continuum damage mechanics (CDM) approach, which consists of the strain-based Hashin failure criteria and the exponential damage evolution law, and considers the nonlinear shear behaviour of the material. The interlaminar damage is simulated by interface elements with cohesive zone model. The numerical results show good agreements with the experiments, thus verifying the validity of the presented numerical model.     

Enhanced chemical reworkability of DGEBA thermosets cured with rare earth triflates using aromatic hyperbranched polyesters (HBP) and multiarm star HBP‐b‐poly(ε‐caprolactone) as modifiers

A hyperbranched aromatic polyester (HBPOH) has been synthesized, and poly(ε‐caprolactone) arms have been grown on some of its end hydroxyl groups (HBPCL). These modifiers have been used in cationic diglycidyl ether of bisphenol A formulations cured with ytterbium triflate as cationic initiator. The effect of HBPOH and HBPCL on the curing kinetics has been studied using differential scanning calorimetry (DSC). The obtained materials have been characterized by dynamomechanical analysis, DSC, thermogravimetric analysis and mechanical tests. The modifiers are incorporated into the thermosetting network because of the participation of the end hydroxyl groups in the cationic curing of epoxides by the activated monomer mechanism. Homogeneous thermosets have been obtained with a remarkable increase in impact strength without sacrificing elastic modulus or hardness. A compromise between the rigid structure of the aromatic hyperbranched core and the flexibilizing effect of the poly(ε‐caprolactone) arms is believed to be responsible for the overall thermal and mechanical properties of the materials. The use of these polymeric modifiers increases the thermal stability of the resulting materials because of the low degradability of the aromatic ester groups in the hyperbranched core and the incorporation of the modifier into the network structure. However, the presence of such ester groups makes them reworkable by hydrolysis or alcoholysis in an alkaline medium, thus opening a way for recovery of valuable substrates. Copyright © 2013 John Wiley & Sons, Ltd.     

Ranking Oxidant Sensitiveness: A Guide for Synthetic Utility

Common oxidants used in chemical synthesis, including newly developed perruthenates, were evaluated in the context of understanding (and better appreciating) the sensitiveness and associated potential hazards of these reagents. Analysis using sealed cell differential scanning calorimetry (scDSC) facilitated Yoshida correlations, which were compared to impact sensitiveness and electrostatic discharge experiments (ESD), that enabled sensitiveness ranking. Methyltriphenylphoshonium perruthenate (MTP3, 8 ), isoamyltriphenylphosphonium perruthenate (ATP3, 7 ) and tetraphenylphosphonium perruthenate (TP3, 9 ) were found to be the most sensitive followed by 2-iodoxybenzoic acid (IBX, 2 ) and benzoyl peroxide (BPO, 10 ), whereas the most benign were observed to be Oxone ( 12 ), manganese dioxide (MnO₂, 13 ), and N-bromosuccinimide (NBS, 17 ).     

State of the art and research development prospects of energy and resource-efficient environmentally safe chemical process systems engineering

In this focus overview, the main types and directions of engineering, methods and techniques of intensification of chemical process systems (CPS) and process optimization of energy- and resource-efficient processes for the representative production of titanium compounds, mining waste processing systems, electrochemical coating technologies, combined technologies for the treatment of industrial effluents and energy-and resource-efficient technologies for cleaning soils from petroleum and chemical pollution products are reviewed. The following issues have been discussed: methods of complex assessment of production energy efficiency and software and information support for automated synthesis of optimal energy-efficient regenerative heat exchange systems using pinch analysis; methods and algorithms for fractal-statistical characteristics analysis of nonstationary gas flows in complex gas pipelines; methods of ecological and economic optimization of production, infrastructure supply chains; methods for assessing and preventing the dangerous environmental impact assessment of chemical pollution; organization and logistics management of business processes engineering for improving the energy efficiency of plants; engineering of problem oriented computer systems, heuristic-computational models and algorithms for intelligent integrated logistics support of the equipment life cycle; engineering developments in the field of digital transformation of energy-efficient CPS and technological production systems; application of methods for optimizing reliability factors optimization, digitalized risk and safety management in the engineering of energy- and resource efficient CPS.     

SPH方法研究空气在平板入水中的影响

飞机水上迫降以及船体在高速行驶时,均会发生结构物砰击水面的现象,当结构物底面较为平坦,砰击水面时会捕获空气,在板底形成空气垫。研究空气垫的形成及影响,有助于对结构物进行更准确的载荷分析。该问题的研究涉及到气固液三相的相互作用,在数值模拟中仍是一个挑战,本文使用光滑粒子流体动力学(SPH)方法对该问题进行模拟。首先,与实验结果进行对比;其次,系统地研究了平板形成空气垫以及砰击水面的过程,考查了空气、水和平板的动能变化。对比了在SPH模拟中考虑空气与不考虑空气得到的水压力场和平板所受压力,说明了空气对结果的影响;最后,研究了平板宽度对空气垫形成的影响,从而进一步影响加速度。     

固体的冲击拉伸碎裂

固体材料在冲击拉伸载荷作用下常常会断裂成多个碎片(碎片化)，固体材料碎片化的物理机制是多点损伤同时在固体中成核和发展，导致固体多处破坏。自 Mott 对固体的动态碎裂问题进行了开创性研究后，几十年来，对固体动态碎裂机制的研究一直是应用物理学、力学、航天和兵器工程等领域共同关心的重要课题。本文介绍了在冲击拉伸载荷作用下固体的动态碎裂研究的发展历史，给出相关的理论分析、实验研究和数值模拟的研究进展，特别针对现有的各种关于碎片尺度、碎片分布、以及碎片化物理机制的理论模型进行了较详尽的阐述和讨论，最后指出现有实验和理论研究中仍然存在的关键科学问题及进一步的研究展望。     

An anti‐diffusive volume of fluid method for interfacial fluid flows

A volume of fluid (VOF) method is developed combining a first‐order limited downwind scheme with higher order accurate schemes. The method is characterized by retaining a sharp fluid interface and a reduction in numerical diffusion near the interface, but avoids complicated geometrical reconstruction as occurs in most volume tracing algorithms. To demonstrate the accuracy and robustness of the method, a selection of numerical experiments are presented involving a pure advection problem, a water wave impact caused by a dam breaking and liquid sloshing in a partially filled tank. Copyright © 2011 John Wiley & Sons, Ltd.     

Biological and catalytic evaluation of Ru(II)‐p‐cymene complexes of Schiff base ligands: Impact of ligand appended moiety on photo‐induced DNA and protein cleavage,cytotoxicity and C‐H activation

Two organometallic Ru(II)‐p‐cymene complexes of the type [Ru(η⁶‐p‐cymene)(L)Cl]PF₆ 1 and 2 , where L is N,N‐bis(4‐isopropylbenzylidene)ethane‐1,2‐diamine (bien, L1 ) or N,N‐bis (pyren‐2‐ylmethylene)ethane‐1,2‐diamine (bpen, L2 ) have been prepared and characterized well. Because of appended pyrenyl groups in coordinated bpen ligand, the complex 2 exhibits higher DNA and protein binding than complex 1 in which isopropylbenzyl groups are incorporated. Interestingly, the luminescent characteristic complex 2 is unique in displaying DNA cleavage after light activation by UVA light at 365 nm through oxygen dependent mechanism. AFM analysis attests the photo‐induced DNA fragmentation ability of complex 2 . Also, the complex 2 cleaves the protein after light exposure in a non‐specific manner suggesting that it can act as a protein photo cleaving agent. In contrast to the trend of DNA and protein interaction of complexes, the complex 1 exhibits cytotoxic activity against human breast carcinoma ( MCF‐7 ) and liver carcinoma ( HepG2 ) with potency higher than that of complex 2 due to enhanced hydrophobicity of isopropyl groups present in p‐cymene and bien ligands. Indeed, complex 2 is inactive against MCF‐7 and HepG2 cancer cell lines even up to 200 μM concentration. The AO/EB staining assay reveals that the complex 1 is able to induce late apoptotic mode of cell death in breast cancer cells, which is further confirmed by inter‐nucleosomal DNA cleavage. Furthermore, the complexes 1 and 2 are evaluated for their catalytic activities and found to be working well for the β‐carboline directed C–H arylation to afford the desired products in good yield (40–47%).