几个金属卤素簇的合成与性能研究

The hydrothermal reaction of CuBr2 and CuBr with phen·H2O （phen= 1,10-phenanthroline） in a molar ratio of 1：1：1.5 gave birth to the first copper-halo cationic cluster [Cu2^Ⅱ Cu2^Br4 （phen）4 ] ^2＋（1） with tetranuclear anionic cluster [Cu4Br6]^2-. Changing the precursors or their molar ratios, two mononuclear complexes [Cu（phen）2Br]Br·H2O （2） and [Ni（phen）3][CuCl2]2 （3） as well as two unusual copper-halo chains found in polymers [Cu2Br2（phen）]∞ （4） and [Cu^ⅡCu3^ⅠBr2Ⅰ3 （phen）2 ]∞ （5） were obtained. The （Cu2Br2）∞ chain of 4 looks like a linearar ray of hexagons based on fused Cu3Br3 units, and the linear （Cu3Ⅰ3Br^-）∞ chain of 5 is an alternate combination of the rhombic Cu2I2 cores and the Cu4I4Br2^2- units. In addition, the hydrothermal reaction of CuBr2 with NA（NA=nicotinic acid） or INA （INA =isonicotinic acid） resulted in the syntheses of two compounds [CuBr（NA）] （6） and [CuBr（INA）]∞（7） containing staircase chain. Among them the third-order non-linear optical properties of 2, 5, 6 and 7 were investigated and all exhibit the reverse saturable absorption （α2〉0） and self-defocusing performance （n2〈0）.     

低温和低压下水热合成Na4Zr2(SiO4)3

以ZrOCl_2·8H_2O,Na_2SiO_3·9H_2O和NaOH为原料,在250℃约100bar的条件下,水热晶化合成出Na_4Zr_2(SiO_4)_3,并生长相应的单晶。讨论了水热反应及其条件.产物借助于XRD,Raman,~(29)Si MAS NMR以及阻抗谱技术进行了研究.结果表明产物具有与其他方法制备的Na_4Zr_2(SiO_4)_3相同的性质.     

Hydrothermal Synthesis and Structural Characterization of a Tubular Arsenic-Vanadate: [CoII(2,2′-bpy)2]2[AsIII8VIV14O42(H2O)]·H2O

The hydrothermal reaction of VOSO₄, As₂O₃, CoC₂O₄·2H₂O and 2,2-bipy yields a novel arsenic-vanadate [Co^II(2,2-bpy)₂]₂[As^III₈V^IV ₁₄O₄₂(H₂O)]·H₂O (1), which is characterized by IR, elemental analysis, TGA, magnetic susceptibility and single crystal X-ray diffraction analysis. X-ray diffraction shows that compound 1 is the first example of tubular arsenic–vanadium cluster containing infinite {[Co(2,2-bpy)₂]₂[As₈V₁₄O₄₂(H₂O)]} chain constructed from [As₈V₁₄O₄₂(H₂O)] clusters interconnected through [Co(2,2-bpy)]²⁺ units. Crystal data: 1, orthorhombic, P 2₁2₁2₁, a=12.1401(2) Å, b=15.8722(1) Å, c=39.9533(5) Å, Z=4.Graphical Abstract: A novel polyoxoarsenicvanadate, [Co^II(2,2-bipy)₂]₂ [As^III₈V^IV ₁₄O₄₂(H₂O)]·H₂O, is depicted along with a tubular hybrid solid with a rhombic tube formed within the chain.     

2D层状焦磷酸锰(Ⅱ)[NH4]2[Mn3(P2O7)2(H2O)2]的结构和磁性研究

A two-dimensional layered manganese(Ⅱ) pyrophosphate, [NH₄]₂[Mn₃(P₂O₇)₂(H₂O)₂] (1), has been synthesized hydrothermally. Its structure is determined by single-crystal X-ray diffraction analysis. Its structure is built up by MnO₆ octahedra and P₂O₇ units, with ammonium NH₄⁺ cations residing in the interlayer regions. The manganese pyrophosphate layer consists of infinite chains of cis and trans edge sharing MnO₆ octahedra linked by P₂O₇ units. Magnetic susceptibility measurements show that this compound exhibits ferrimagnetic-like ordering below 3.2 K. Further study shows that there are two possible superexchange pathways via the oxygen anions in Mn²⁺ ions. Owing to the different bridging modes of O^2-, the competition between ferromagnetic interactions and antiferromagnetic interactions in Mn²⁺ ions results in the ferrimagnetic behavior of 1.     

Hydrothermal Synthesis of Mo-Based Oxide Catalysts and Selective Oxidation of Alkanes

Mo-V-M(=Al, Ga, Bi, Sb and Te)–O mixed oxide catalysts were synthesized hydrothermally for the first time, characterized structurally, and tested for ethane and propane oxidation after activation by various ways. These catalysts were black solids of rod-shaped (fiber like) crystals, which had a layer structure in the direction of fiber axis and a high dimensional arrangement of metal octahedra in the cross-section plane. These fresh crystalline materials became active for catalytic oxidation of alkanes after heat-treatment at 600 °C and subsequent grinding in order to increase exposed plane of the cross-section. The resulting catalysts were very active for an oxidative dehydrogenation of ethane with 80% of the ethylene selectivity in the reaction temperature range of 300 to 400 °C and also showed about 50% selectivity to acrylic acid in the propane oxidation. Multi-functional character which derived from the high dimensional structure of the catalysts and mechanism of the selective alkane oxidation were discussed.     

ZnO微晶的水热合成及形貌控制研究

以Zn(NH3)4(Ac)2为前驱体,不加任何模板剂和表面活性剂,低温下通过改变反应条件(如前驱体浓度、反应时间及反应温度),实现了对ZnO微晶形貌和尺度的有效控制.所得花状、蜂窝状、柱状ZnO用X射线衍射仪和扫描电镜进行了鉴定和表征,并初步探讨了不同形貌ZnO微晶的生长机理.     

水热法合成K0.5Bi0.5TiO3纳米陶瓷粉体

K_0.5Bi_0.5TiO₃(KBT)nanocrystalline particles were hydrothermally synthesized from Bi(NO₃)₃·5H₂O, TiO₂ and KOH. The crystal phase, chemical composition and microstructure were characterized by XRD, XRF, Raman scattering spectroscopy and TEM. The results indicated that the products were pure perovskite structured K_0.5Bi_0.5TiO₃ with chemical stoichiometry and perovskite structure. The TEM observation revealed that the particles possessed a feature of cubic shape and a nano-scale of about 40 nm. The KBT ceramics sintered at 1 040 ℃ from hydrothermal powders show higher density and better electric properties than that prepared by a solid-state reaction method.     

水热法制备Sb2S3纳米棒有序阵列

以Sb(S₂CNEt₂)₃为单源前驱体，通过改变时间、温度、表面活性剂等反应条件，用水热法成功合成了各种尺寸的Sb₂S₃纳米棒及其有序阵列。X-射线衍射(XRD)、能量分散光谱(EDS)以及选区电子衍射(SAED)研究表明纳米棒由正交晶系Sb₂S₃单晶构成。扫描电子显微镜(SEM)和透射电子显微镜(TEM)研究显示Sb₂S     

THF—FER沸石的系列研究—1．晶体结构稳定性

四氢呋喃（THF）-Na2O-SiO2-Al2O3-H2O体系水热合成的THF-FER沸石，经酸交 换-焙烧脱THF（Ⅰ）或焙烧脱THF-酸交换（Ⅱ）的不同方式处理，均可制得低钠H- FER沸石。经XRD，^27Al与^29Si MAS NMR,低温氮吸附等表征证明，通过1273K高温 的热处理和1073K饱和水蒸气下的水热处理，H-FER沸石骨架保持高度稳定。在高温 水蒸气作用下，Si(2Al）容易从骨架上脱离，而Si(1Al）则保持相对稳定，以（Ⅱ ）方法处理，制备的H-FER沸石在水热条件下易产生较多的硅差劲基缺陷。经高温 热和水热处理后，H-FER沸石孔道结构基本保持完美、开放。     

A Simple Hydrothermal Route to Large‐Scale Synthesis of Uniform Silver Nanowires

This paper describes the preparation of uniform silver nanowires by reducing freshly prepared silver chloride with glucose at 180 °C for 18 hours in the absence of any surfactants or polymers. Scanning electron microscopy studies indicated that the silver nanowires are about 100 nm in diameter and up to 500 μm in length. High‐resolution transmission electron microscopy analyses showed that the silver nanowires grow perpendicularly to the Ag(200) plane. The silver nanowires are believed to grow through a solid–solution–solid process. Some influential factors on the growth of silver nanowires are also discussed.