减压渣油供氢剂减黏裂化研究

减黏裂化作为一种不生成焦炭的热加工方法主要涉及两类化学反应，裂解反应和缩合反应。裂解反应使减压渣油的平均分子量及其胶团直径变小，改善渣油的倾点和黏度；缩合反应使减压渣油及其中间产物中的芳烃、烯烃等缩合成大分子量产物，产生新的胶核，甚至生成焦炭。常规减黏裂化过程中，这两类化学反应主要与反应温度和反应时间有关。在热作用下渣油中的大分子裂解为H／C原子比相对较高的饱和烃自由基和H／C原子比相对较低的芳香性自由基。后者还可失去自身的环烷氢而使其H／C原子比进一步降低。如果体系中有足量的氢化芳烃存在，那么氢化芳烃分子上的活泼氢就可能转移到芳香性自由基的单电子位，将自由基封闭，从而阻止芳香性自由基之间的相互缩合，抑制使分子长大的缩合反应。如果体系中的氢化芳烃含量不足。则热反应体系中就没有足够的活泼氢将芳香性自由基封闭，芳香性自由基缩合反应的几率较高，造成过早地生焦。这种来自渣油分子自身的活泼氢的化学行为与渣油热反应生焦诱导期有一定关系。     

二(三苯基膦)水杨酸铜(Ⅰ)乙醇溶剂配合物的晶体结构

0IntroductionThestudyofcopper?complexesisinvestigatedinmanylaboratories.Amongthereasonsforcarryingouttheinvestigationofsuchspeciesaretheirstructuralfeatures犤1犦,theusefulnessofcopper?compoundsinorganicsyntheses犤2犦andthewell-documentedimpor-tanceofcopper?centersattheactivesitesofanumberofprotein犤3犦.Concerningcopper?carboxy-latesafurtherinterestexists,stemmingfromtheiruseinhomogeheouscatalysedhydrogenation犤4犦.Thecopper?bis(triphenylphosphine)cationisasoft,butflexi-bleacceptorionthatcanacc…     

Influence of hydrogen bonding on the properties of water molecules adsorbed in zeolite frameworks

Three hydrated aluminosilicate frameworks—LiABW, NaNAT, and BaEDI—are partly optimized with the periodic Hartree–Fock CRYSTAL95 code. In particular, we optimized the positions of the adsorbed water molecules including the positions of the framework cations (ABW, NAT) or part of the framework atomic positions (ABW). This allowed us to compare cation–water clusters in the gas and adsorbed states and discuss the influence of hydrogen bonding to the framework oxygen atoms or to the neighbor water molecules on the atomic properties (quadrupole coupling constant, anisotropy of electric field gradient) of the adsorbed water molecules. The LiBIK structure obtained from X‐ray diffraction is also considered to illustrate the hydrogen bonds occurring between adsorbed water molecules. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem, 2003     

{Cu[H_2NC(CH_2OH)_3]_2}{Pic}_2·H_2O的合成与晶体结构

三羟甲基氨基甲烷与苦味酸(Pic)铜在乙醇水混合液中反应,制得少见的不对称氢键连接的超分子化合物{Cu[H2NC(CH2OH)3]2}{Pic}2?H2O。晶体属三斜晶系,空间群为P ,晶胞参数为a = 6.894(1),b = 8.219(1),c = 13.543(3) ? ?= 79.290(1),?= 8 3.36(2), ?= 84.590(1)埃轿狢20H30CuN8O22,V = 746.9(2) 3,Z = 1,Dc = 1.774 g/cm3,F(000) = 411,?= 0.844 mm-1,R = 0.0334,Rw = 0.0863。在配合物的结构单元中, Cu2+位于对称中心,分别与2个四齿配体(三羟甲基氨基甲烷)中的2个OH,1个NH2,三齿配位,呈笼状螯合。而另一个OH,因配体和中心离子构型的限制,不参与配位。     

流动注入吸附溶出—催化极谱氢波分析痕量铂

本文叙述一种流动注入吸附溶出一催化极谱测定痕量铂的新技术,它集中了溶出法、催化波和流动注入的优点,达到非常高的灵敏度和分析速度。实验给出了最佳载液组成、流速、注入体积、吸附富集电位和吸附时间等因素。本方法成功地进行了多种铂络合物、矿样和生物样品分析。     

A supported gold catalyst for the elimination of hydrogen from CO2 feed gas in the production of urea

Supported gold catalyst for eliminating hydrogen from CO₂ feed gas in the production of urea is found to be superior to other industrial catalysts (e.g. Pt/Al₂O₃ and PdPt/Al₂O₃) in catalytic activity and resistance to sulfur poisoning.     

Synthesis, X-ray crystal structures, and gas sorption properties of pillared square grid nets based on paddle-wheel motifs: implications for hydrogen storage in porous materials

A systematic modulation of organic ligands connecting dinuclear paddle-wheel motifs leads to a series of isomorphous metal-organic porous materials that have a three-dimensional connectivity and interconnected pores. Aromatic dicarboxylates such as 1,4-benzenedicarboxylate (1,4-bdc), tetramethylterephthalate (tmbdc), 1,4-naphthalenedicarboxylate (1,4-ndc), tetrafluoroterephthalate (tfbdc), or 2,6-naphthalenedicarboxylate (2,6-ndc) are linear linkers that form two-dimensional layers, and diamine ligands, 4-diazabicyclo[2.2.2]octane (dabco) or 4,4'-dipyridyl (bpy), coordinate at both sides of Zn(2) paddle-wheel units to bridge the layers vertically. The resulting open frameworks [Zn(2)(1,4-bdc)(2)(dabco)] (1), [Zn(2)(1,4-bdc)(tmbdc)(dabco)] (2), [Zn(2)(tmbdc)(2)(dabco)] (3), [Zn(2)(1,4-ndc)(2)(dabco)] (4), [Zn(2)(tfbdc)(2)(dabco)] (5), and [Zn(2)(tmbdc)(2)(bpy)] (8) possess varying size of pores and free apertures originating from the side groups of the 1,4-bdc derivatives. [Zn(2)(1,4-bdc)(2)(bpy)] (6) and [Zn(2)(2,6-ndc)(2)(bpy)] (7) have two- and threefold interpenetrating structures, respectively. The non-interpenetrating frameworks (1-5 and 8) possess surface areas in the range of 1450-2090 m(2)g(-1) and hydrogen sorption capacities of 1.7-2.1 wt % at 78 K and 1 atm. A detailed analysis of the sorption data in conjunction with structural similarities and differences concludes that porous materials with straight channels and large openings do not perform better than those with wavy channels and small openings in terms of hydrogen storage through physisorption.     

CoOx改性TiO2光催化剂的制备、优化及其光催化分解水析氢性能研究

利用热分解法制备了不同掺杂量的CoO_x-TiO₂系列光催化剂, 并优化了制备方法。在用XRD、TEM和XPS等技术对催化剂表征的基础上，探讨了乙醇作为电子给体时CoO_x改性对P25-TiO₂光催化分解水析氢性能的影响。本文还利用连续瞬态电流-时间响应和循环伏安法等电化学方法，考察了CoO_x-TiO₂改性系列光催化剂光照条件下电流响应强度、起始光电响应特性差别及光催化析氢电位变化等光电化学性能。光催化性能实验结果表明，适当掺杂CoO_x(110～400 ℃焙烧时最佳掺杂量约为0.4wt% Co，500 ℃焙烧时最佳掺杂量约为0.6～0.8wt% Co)能够显著地提高TiO₂析氢光催化性能，产氢速率提高2个数量级。另外在适当温度下的热处理，能够改善催化剂光催化性能(最佳处理温度为300～400 ℃)。光电化学性能评价结果表明，适当掺杂CoO_x和适当温度下焙烧能在催化剂表面形成较多的析氢活性物种——含钴复合物，能有效增强催化剂光电流响应强度，并使得析氢光还原电位向有利于析氢方向位移。高含量掺杂CoO_x会在催化剂表面形成某种碳化物物种，大量含钴复合物活性中心的出现会降低光吸收效率，增加TiO₂表面光生电子-空穴复合率而使催化剂失去析氢光催化性能。     

The thermal decomposition of NaHCO3 powders and single crystals

The thermal decomposition of four commercial powders and of differently stored single crystals of sodium hydrogen carbonate is studied by power compensation DSC and by optical and FT-IR microscopy. Independently of manufacturer, specified purity and price, the thermal curves of all the commercial powders show a more or less pronounced low temperature peak preceding the one due to the main decomposition. Such small peak is not observed when samples of laboratory recrystallized material are used. However the thermal behaviour of the latter preparation differs remarkably depending on storage conditions: the material kept in closed glass containers decomposes at temperatures higher than those of the material stored in a dessiccator in the presence of concentrated H₂SO₄. The observation by optical microscopy of the behaviour of the surfaces of single crystals coming from different storage conditions when the temperature is raised in a Kofler heater helps the interpretation of the data collected. The mechanism of the decomposition is discussed and the relevant kinetic parameters reported.     

四氢键二聚体和分子组装

介绍了最近几年新的四氢键有机二聚体研究的进展及其在分子自组装和分子聚 集体化学研究中的应用。