旋转滑动弧氩等离子体裂解甲烷制氢

采用切向气流和磁场协同驱动的旋转滑动弧氩等离子体,先通过光谱分析法计算了其电子温度和电子密度,了解其物理特性,将其应用于甲烷裂解制氢,研究了进气流量和CH_4/Ar比对反应效果的影响。结果表明,该滑动弧系统电子温度为1.0-2.0 e V,电子密度高达1015cm~(-3),是介于热与低温等离子体之间的一种等离子体形式,具有独特的物理特性,可以在达到较高反应效率的同时,保持较大的处理量;在CH_4裂解制氢实验中,CH_4转化率可达22.1%-70.2%,并随进气流量和CH_4/Ar比的增大均逐渐降低;H_2选择性为21.2%-61.2%,并随进气流量的增大先基本不变后有所增大,随CH_4/Ar比的增大逐渐降低;与应用于甲烷裂解的不同形式的低温等离子体对比(如微波、射频、介质阻挡放电等)可以发现,旋转滑动弧在获得较高甲烷转化率、较高H_2选择性和较低制氢能耗的同时,还可以保持较大的处理量,即进气流量可达6-20 L/min。     

Effect of multiple H‐bonding on the properties of polyimides containing the rigid rod groups

To investigate the influence of hydrogen bonding on the properties of polyimides (PIs) containing rigid rod‐like groups, five symmetrical diamines containing benzimidazole, benzoxazole, and hydroxy group were synthesized, and then a series of PIs were prepared. Results showed that hydroxyl‐containing poly(benzoxazole imide)s possess higher glass transition temperature (T_g) and dimensional stabilities than their corresponding poly(benzoxazole imide)s. Moreover, the corresponding poly(benzimidazole imide)s presented the best performances, such as the highest T_g, the highest char yield and the highest dimensional stabilities. The influence of hydrogen bonding of benzimidazole on the properties of PIs was stronger than that of hydroxyl groups. Hydroxyl‐containing poly(benzoxazole imide)s were formed in crosslinking structures after heat treatment at 400 °C. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 570–581     

Characterization and gas adsorption of a novel three‐dimensional metal–organic framework (MOF) generated from a new polydentate fluorene‐bridged ligand

A polydentate ligand bridged by a fluorene group, namely 9,9‐bis(2‐hydroxyethyl)‐2,7‐bis(pyridin‐4‐yl)fluorene (L), has been prepared under solvothermal conditions in acetonitrile. Crystals of the three‐dimensional metal–organic framework (MOF) poly[[[μ₃‐9,9‐bis(2‐hydroxyethyl)‐2,7‐bis(pyridin‐4‐yl)fluorene‐κ³N:N′:O]bis(methanol‐κO)(μ‐sulfato‐κ²O:O′)nickel(II)] methanol disolvate], {[Ni(SO₄)(C₂₇H₂₄N₂O₂)(CH₃OH)]·2CH₃OH}_n, (I), were obtained by the solvothermal reaction of L and NiSO₄ in methanol. The ligand L forms a two‐dimensional network in the crystallographic bc plane via two groups of O—H…N hydrogen bonds and neighbouring two‐dimensional planes are completely parallel and stack to form a three‐dimensional structure. In (I), the Ni^II ions are linked by sulfate ions through Ni—O bonds to form inorganic chains and these Ni‐containing chains are linked into a three‐dimensional framework via Ni—O and Ni—N bonds involving the polydentate ligand L. With one of the hydroxy groups of L coordinating to the Ni^II atom, the torsion angle of the hydroxyethyl group changes from that of the uncoordinated molecule. In addition, the adsorption properties of (I) with carbon dioxide were investigated.     

Azulene‐Based Macrocyclic Receptors for Recognition and Sensing of Phosphate Anions

Herein we report the synthesis and detailed studies of the anion‐binding properties of two 20‐membered macrocyclic tetramide receptors: one symmetrical, containing two identical azulene‐based bisamide units, the other a hybrid, containing a dipicolinic bisamide unit and an azulene‐based bisamide unit. Analysis of the crystal structures of the macrocyclic receptors revealed their preference for adopting similar well‐preorganized bent‐sheet conformations, both as free receptors and in their complexes with anions. Studies of the optical properties of both receptors revealed abilities to selectively sense phosphate anions (H₂PO₄^?, HP₂O₇^3?), allowing for naked‐eye detection of the presence of these guests in DMSO. Binding studies in solution confirmed that the receptors bind strongly to a series of anions even in highly demanding media, such as mixtures of DMSO with water or with methanol. Comparison of the anion affinity of linear analogues with that of the macrocyclic receptors evidenced the importance of macrocyclic topology. Quantitative analysis revealed that the macrocyclic receptors are selective for H₂PO₄^? over other anions. The affinity to H₂PO₄^? seen for the symmetrical receptor, containing two azulene‐based subunits, is much higher than for the hybrid macrocycle containing both the azulene‐based and pyridine‐derived subunits. This highlights that the azulene‐based building block serves efficiently as both a binding site and a structure‐preorganizing motif.     

Miscible blends of poly(ethylene oxide) with brush copolymers of poly(vinyl alcohol)‐graft‐poly(l‐lactide)

Even though poly(ethylene oxide) (PEO) is immiscible with both poly(l ‐lactide) (PLLA) and poly(vinyl alcohol) (PVA), this article shows a working route to obtain miscible blends based on these polymers. The miscibility of these polymers has been analyzed using the solubility parameter approach to choose the proper ratios of the constituents of the blend. Then, PVA has been grafted with l ‐lactide (LLA) through ring‐opening polymerization to obtain a poly(vinyl alcohol)‐graft‐poly(l ‐lactide) (PVA‐g‐PLLA) brush copolymer with 82 mol % LLA according to ¹H and ¹³C NMR spectroscopies. PEO has been blended with the PVA‐g‐PLLA brush copolymer and the miscibility of the system has been analyzed by DSC, FTIR, OM, and SEM. The particular architecture of the blends results in DSC traces lacking clearly distinguishable glass transitions that have been explained considering self‐concentration effects (Lodge and McLeish) and the associated concentration fluctuations. Fortunately, the FTIR analysis is conclusive regarding the miscibility and the specific interactions in these systems. Melting point depression analysis suggests that interactions of intermediate strength and PLOM and SEM reveal homogeneous morphologies for the PEO/PVA‐g‐PLLA blends. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1217–1226     

Tracking the Electrocatalytic Activity of a Single Palladium Nanoparticle for the Hydrogen Evolution Reaction

The nanoparticle-based electrocatalysts’ performance is directly related to their working conditions. In general, a number of nanoparticles are uncontrollably fixed on a millimetre-sized electrode for electrochemical measurements. However, it is hard to reveal the maximum electrocatalytic activity owing to the aggregation and detachment of nanoparticles on the electrode surface. To solve this problem, here, we take the hydrogen evolution reaction (HER) catalyzed by palladium nanoparticles (Pd NPs) as a model system to track the electrocatalytic activity of single Pd NPs by stochastic collision electrochemistry and ensemble electrochemistry, respectively. Compared with the nanoparticle fixed working condition, Pd NPs in the nanoparticle diffused working condition results in a 2–5 orders magnitude enhancement of electrocatalytic activity for HER at various bias potential. Stochastic collision electrochemistry with high temporal resolution gives further insights into the accurate study of NPs’ electrocatalytic performance, enabling to dramatically enhance electrocatalytic efficiency.     

Orbital relaxation effects on temperature diagnostics of mid-Z plasmas

The orbital relaxation effect was studied in the calculations and diagnostics of the L-shell absorption spectra (2p→3d,4d,5d) of iron and bromine plasmas. A detailed level accounting model was developed to calculate the huge number of L-shell absorption lines of the two typical mid-Z plasmas. The orbital sets were generated by the optimizations according to the initial and final states, respectively. It was found that the L-shell line positions agree with the experimental iron and bromine spectra better when the orbital relaxations were included in calculations. Since experimental mid-Z spectra have few detailed line structures, calculations without considering orbital relaxations may misinterpret the spectra and consequently lead to underestimations of the plasma temperatures.