多值测试诊断策略优化设计

针对电子系统中多值测试条件下的测试排序问题,提出了一种诊断策略优化方法。首先,以相关性矩阵模型为基础,将已有的二值测试的优化算法同多值测试问题相结合,提出了适用于多值测试的基于霍夫曼编码的启发式函数;其次,将平均测试代价最小和平均测试步骤最少作为优化目标,采用与或树启发式搜索算法生成诊断树,得到多值测试的诊断策略,并给出了诊断策略优化方法的具体实现步骤;最后,将其应用到航空设备的实例中。结果表明提出的基于霍夫曼编码的与或树启发式搜索算法是可行的,其生成的诊断树是最优的,比基于信息熵的与或树启发式搜索算法具有更小的平均测试代价和更少的平均测试步骤。     

Hidden chemistry of substituted aniline radical cations in water: a mechanistic study

Absolute rate constants for hydroxyl radical, azide radical, and hydrated electron reactions with a sulfa drug 4,4'‐diamino diphenyl sulfone (dapsone) in water have been evaluated using electron pulse radiolysis technique. Absolute rate constants for hydroxyl radical and azide radical were determined as (8.4 ± 0.3) × 10⁹ and (5.6 ± 0.5) × 10⁹ M^?1 s^?1, respectively. The reduction of dapsone with the hydrated electron occurred with rate constant of (9.2 ± 0.1) × 10⁹ M^?1 s^?1. Hydroxyl radical reactions result in the synchronous formation of adduct as well as anilino radical. The interesting observation is that the yield of the anilino radical increases with increase in pH. Contrary to this, the yield of the adduct decreases with pH. We propose that hydroxyl radical adds predominantly to the aniline. In contrast, the reaction of azide radical with the dapsone suggests that the reaction occurs at the –NH₂ moiety of the aniline ring. The free radical electron transfer from dapsone to parent radical cation of non‐polar solvent also results in the formation of anilino radical only suggesting that the radical cation of dapsone has a short lifetime. The reaction of hydrated electrons with the dapsone suggests that the reaction occurs at different reaction site. The experimental results supported by theoretical calculations of this study provide fundamental mechanistic parameters that probably decide the fate of the radical cation of aniline derivatives. Copyright © 2014 John Wiley & Sons, Ltd.     

脉冲单频Nd:YVO4激光器及其倍频输出特性研究

为了研制激光干涉成像所需的主振荡功率放大(MOPA)结构脉冲单频激光器,本文完成MOPA激光器的种子源即声光调Q脉冲单频1 064 nm激光器的特性研究,同时完成种子源腔外倍频绿光特性研究。脉冲单频激光器采用声光调Q模块实现脉宽约20 ns的1 064 nm脉冲激光输出,采用环形腔设计并采用一组不同厚度的标准具实现单纵模运转。实验研究基频1 064nm和倍频532 nm激光脉冲的线宽,得出在全脉宽范围内都具有较高时间相干性的结论。实验分别获得脉宽约28 ns峰值功率约6.5 kW的1 064 nm脉冲单频激光和脉宽约20 ns、峰值功率约0.5 kW的532 nm脉冲单频激光,腔外倍频效率为5.6%。实验同时也验证了腔外倍频的激光脉宽压缩效应。     

Trends in ultrashort and ultrahigh power laser pulses based on optical parametric chirped pulse amplification

Since the proof-of-principle demonstration of optical parametric amplification to efficiently amplify chirped laser pulses in 1992,optical parametric chirped pulse amplification(OPCPA)became the most promising method for the amplification of broadband optical pulses.In the meantime,we are witnessing an exciting progress in the development of powerful and ultrashort pulse laser systems that employ chirped pulse parametric amplifiers.The output power and pulse duration of these systems have ranged from a few gigawatts to hundreds of terawatts with a potential of tens of petawatts power level.Meanwhile,the output pulse duration based on optical parametric amplification has entered the range of fewoptical-cycle field.In this paper,we overview the basic principles,trends in development,and current state of the ultrashort and laser systems based on OPCPA,respectively.     

Application of Novel Zn‐Ferrite Modified Glassy Carbon Paste Electrode as a Sensor for Determination of Cd(II) in Waste Water

This paper describes the preparation of a new sensor based on Zn‐ferrite modified glassy carbon paste electrode and its electrochemical application for the determination of trace Cd(II) ions in waste waters using differential pulse anodic stripping voltammetry (DPASV). Different Zn/Ni ferrite nanoparticles were synthesized and characterized using scanning electron microscopy (SEM) and X‐ray powder diffraction (XRPD). The prepared ferrite nanoparticles were used for the preparation of Zn‐ferrite‐modified glassy carbon paste electrode (ZnMGCPE) for determination of Cd(II) at nanomolar levels in waste water at pH 5. The different parameters such as conditions of preparation, Zn²⁺/Ni²⁺/Fe²⁺ ratio and electrochemical parameters, percentage of modifier, accumulation time, pH and accumulation potential were investigated. Besides, interference measurements were also evaluated under optimized parameters. The best voltammetric response was observed for ZnFe₂O₄ modifier, when the percentage of modifier was 3 %, accumulation time 9 min, pH of supporting electrolyte 5 and accumulation potential ?1.05 V. Thus prepared electrode displays excellent response to Cd(II) with a detection limit of 0.38 ppb, and selective detection toward Cd(II) was achieved.     

Mycotoxins: Simultaneous Detection of Zearalenone and Citrinin by Voltammetry on Edge Plane Pyrolytic Graphite Electrode

Mycotoxins are highly toxic compounds often found in the food. It is of paramount importance to have analytical technique for point‐of‐care on‐spot detection for authorised personnel to immediately take the action required. Electrochemistry offers the portability for miniaturized sensor of mycotoxins. Here we show that edge‐plane pyrolytic electrode offers excellent selectivity and sensitivity towards simultaneous detection of zearalenone and citrinin. This will have a great impact for point‐of‐care mycotoxin detection.     

Development of Biosensor for Catechol Using Electrosynthesized Poly(3‐methylthiophene) and Incorporation of LAC Simultaneously

Simultaneous electropolymerization of 3‐methylthiophene and incorporation of Laccase (LAC) was carried out in the presence of propylene carbonate as a medium by amperometric method. This enzyme modified electrode was used for the sensing of polyphenol. Catechol is taken as a model compound for the study. UV‐Vis spectral studies suggest no denaturation of LAC in presence of propylene carbonate. The SEM studies reveal the surface morphology and incorporation of LAC in P3MT with agglomerated flaky masses are observed in with and without enzyme micrographs. The cyclic voltammograms were recorded for 0.01 mM catechol on plain glassy carbon, polymer and enzyme incorporated electrodes at pH 6.0 and scan rate 50 mV s^?1. The fabricated electrochemical biosensor was used for the determination of catechol in aqueous solution by Differential Pulse Voltammetry (DPV) technique. The concentration linear range of 8×10^?8 to 1.4×10^?5 M a value of Michealis? Menten constant K_m=7.67 µmol dm^?3 and activation energy is 32.75 kJ mol^?1. It retains 83 % of the original activity after 60 days which is much higher than that of other biosensors. The developed biosensor was used to quantify catechol in the determination in real samples.     

Observation of radially polarized terahertz radiation generated by a sub-picosecond electron beam

The fundamental property of radially polarized terahertz radiation, which is axial symmetry of the polarization state in the radial direction, was measured with a Schottky diode detector and with a terahertz camera and wire-grid linear polarizer. Radially polarized terahertz radiation was generated from coherent transition radiation using a 30-MeV sub-picosecond electron beam. Bow-tie intensity distributions, aligned along the polarization direction, were clearly observed with the terahertz camera and could be rotated by changing the direction of the linear polarizer. The measured intensity distribution agreed with the calculated value. A video of the data can be found online.     

XPS study of Cr segregation in a martensitic stainless steel

Cr martensitic steels are promising materials for structural applications in future nuclear fusion reactors. Because the embrittlement after tempering treatments can be a serious problem, the fracture mode of a steel with 10.5 wt% of Cr treated at 700°C for 18 h has been investigated through Charpy tests in the temperature range from −100°C to +150°C. X-ray photoelectron spectroscopy (XPS) analyses carried out on the fracture surfaces evidenced the segregation of Cr in both ductile and brittle (quasicleavage) fields. The unexpected result indicates that Cr segregation weakens the atomic bonds; thus, the fracture path in both the cases corresponds to the zones with higher Cr content.